ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V2 & R1V37-123
l
l
lEnhanced digit manipulation
Request of CPN/BN (Calling Party Number/Billing Number) (formerly SID/ANI) on a call by call
basis
Night destination½
½
½
½
Figures 7-62, Trunk Group Screen, Page 1 (ISDN-PRI Trunk Group), 7-63, Trunk Group Screen, Page 2
(ISDN-PRI Trunk Group), 7-64, Trunk Group Screen, Page 3 (CBC Usage), 7-65, Trunk Group Screen,½
½
½
Page 4 (CBC Usage), and 7-66, Routing Pattern Screen depict this procedure.
TRUNK...

7-124ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V2 & R1V3
TRUNK FEATURES
ACA Assignment? n
MIS Measured? n
Used for DCS? n
Maintenance Tests? y
Service/CalledCalledPage 2
Internal Alert ? n
Data Restriction? n
Send CPN? n
Send Name? n
DelInsertPer CallCPN/BNNight
ServFeatureLenNumber
Figure 7-63. Trunk Group Screen, Page 2 (ISDN-PRI Trunk Group)
CBC Trunk Group Usage Allocation
Trunk Allocation Plan 1Trunk Allocation Plan 2Trunk Allocation Plan 3
Service/Min#Max#Service/
Min#Max#Service/...

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V2 & R1V37-125
CBC Trunk Group Usage Allocation Plan Assignment Schedule
Usage Method:
Fixed? yAllocation Plan
Scheduled? n
Usage Allocation Plan Activation Schedule:
ActPln
ActPlnActPlnActPlnTime #Time #Time #Time #
Sun
Mon
Tue
Wed
Thu
Fri
SatNumber: 1ActPlnTime #ActPlnTime #
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ ____ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ _
___ : ___ ____ : ___...

7-126ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 1
ADDENDUM 1 (December 1990) to 555-025-101, Issue 4 

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 17-127
GENERIC 1
Generic 1 has the same DS1 facility considerations (such as framing, signaling, line coding format) as
System 75. It also requires the additional clock circuit pack for synchronization. The main significant
difference between a System 75 and Generic 1 is support of the TN767 circuit pack for both DS1/DMI
and ISDN-PRI.
Depending on whether a Generic 1 provides private network ISDN service or public network ISDN
services,...

7-128ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 1½
Location:Line Compensation: 1
Framing Mode: esf
DMI-BOS? y
Slip Detection? nDS1 CIRCUIT PACK
Name:Zero Code Suppression:
Signaling Mode:
MAINTENANCE PARAMETERS
Remote Loop-Around Test?Page 1 of 1zcscommon-chan
n
Figure 7-67. DS1 Circuit Pack Screen, Common-Channel Signaling½
Location:Line Compensation: 1
Framing Mode: esf
Slip Detection? nDS1 CIRCUIT PACKPage 1 of 1Name:Zero Code Suppression: zcs
Signaling Mode: isdn-pri...

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 17-129
DS1 CIRCUIT PACKPage 1 of 1
Location:Name:Line Compensation: 1Zero Code Suppression: b8zs
Framing Mode: esfSignaling Mode: isdn-ext
MAINTENANCE PARAMETERS
Remote Loop-Around Test? n½
Slip Detection? n½
Figure 7-69. DS1 Circuit Pack Screen, ISDN-EXT Signaling½
Service/Facility Options½
Location
A display-only field specifying the carrier and slot of the DS1 Interface.
Name
The name as assigned on the network diagram.
ADDENDUM 1...

7-130ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 1
LineRefers to the distance between the switch and the network channel-terminating
Compensationequipment (NCTE), CDM, CEM, DSX-1 cross-connect, T1 office repeater, or other
equipment. The compensation setting is for the total distance between the switch and
the endpoint. Table 7-15, Line Compensation Values, summarizes compensation.
TABLE 7-15. Line Compensation Values
Compensation ValueDistance (Feet)
1000 to 133
2133 to 266
3266...

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 17-131
SignalingThe default option is common-channel. This option is the same as 24th-channel or
ModeAVD for System 85. The alternate choices are ISDN-PRI and robbed-bit.
If ISDN-PRI is optioned, then the DMI-BOS field disappears and the Connect field
appears. The choice of signaling mode used is dependent on the application.
If ISDN-EXT is optioned (Generic 1 R1V5 only), the DMI-BOS field disappears (D-
channel related fields do not...

7-132ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 R1V5 & GENERIC 1½
½
½
½
Interface ConnectThis field is not available unless the Signaling Mode field is translated isdn-pri.
Field encodes and their descriptions are:
l    network (default option) — implies that the Generic 1 will function as user side
and the switch connects to the ISDN-PRI public network facilities.
l    pbx — implies that a Generic 1 will connect to ISDN-PRI private network
facilities.
l    host — implies that a Generic 1 will...