Home > Apple > Notebook > Apple macbook pro User Manual

Apple macbook pro User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Apple macbook pro User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							MacBook Pro Take Apart — Memory 21
    Memory
    Tools
    This procedure requires the following tools: #0 Phillips screwdriver (magnetized)
    • 
    Clean non-marring work surface
    • 
    ESD wrist strap and mat
    • 
    Preliminary Steps
    Before you begin, remove the following:
    Batter
    •  y
    Part Location 
    						
    							MacBook Pro Take Apart — Memory 22
    Procedure
    Warning: If the computer has been recently operating, allow it to cool down before 
    performing this procedure.Place the computer face down.
    1.  
    Remove the three screws from the memory door.  
    2.  
    Remove the door, as shown.  
    3. 
     
    Notes:  
    •  If only one memory card is installed, the factory installs it in the bottom memory slot.  
    •  Memory must be removed from the top slot before removing from the bottom slot. 
    						
    							MacBook Pro Take Apart — Memory 23
    To remove memory cards, carefully spread the two locking tabs for the slot (top or bottom) 
    4.  
    away from the card on both sides and allow the card to pop up slightly.  
    Pull the card straight back and out of the memory slot.  
    5.  
    						
    							MacBook Pro Take Apart — Memory 24
    Replacement Procedure
    Notes: DDR memory cards do not fit in this slot (different notch location).
    • 
    If installing two cards, install into the bottom slot first.
    • 
    When finished installing memory into the bottom slot, use a black stick leveraged against 
    • 
    the frame to push the back of the card toward the slot to verify that the card is firmly seated. 
    Align the notch in the memory card with the tooth in the slot before inserting.
    • 
    To install a memory card, insert the card at a 25-degree angle behind the locking tabs of the 
    1.  
    top slot. 
    Firmly push the card straight into the slot until it is fully and securely seated along its length.  
    2.  
    Note: If the back of the card drops down before it is fully seated, raise it up enough to push 
    it fully into the slot.   
    						
    							MacBook Pro Take Apart — Memory 25
    When the card is fully seated, push the card straight down until the tabs click onto both 
    3. 
    sides of the card, locking it into place.  
    To ensure that the memory cards are fully and securely seated, for the lower card, use a black 
    4.  
    stick leveraged against the frame to evenly push along the back of the card.   
    						
    							MacBook Pro Take Apart — Memory 26
    For the upper memory card, push with your thumbs to verify the card is fully seated.
     
    5. 
    Check that the cards are secured by the brackets on both sides.
    6.  
    Install the memory door.
    7.  
    Replace the battery.
    8.  
    Use Apple System Profiler to verify that the memory is recognized. (Choose the menu 
    9. 
    bar Apple logo () > About This Mac, click More Info..., select the System Profile tab, 
    open the Memory Overview.) 
    						
    							MacBook Pro Take Apart — Top Case 27
    Top Case
    Tools
    This procedure requires the following tools: #0 Phillips screwdriver (magnetized)
    • 
    Torx T6 screwdriver (magnetized)
    • 
    Black stick (nylon probe 922-5065) (or other non-conductive nylon or plastic flat-blade tool
    • 
    Multi-compartment screw tray (such as a plastic ice cube tray)
    • 
    Preliminary Steps
    Before you begin, remove the following:
    Batter
    •  y
    Memory Doo
    •  r
    Part Location 
    						
    							MacBook Pro Take Apart — Top Case 28
    Procedure
    Notes: If replacing the top case, once the top case is removed, use a razor knife to carefully lift and 
    • 
    transfer the Serial Number and Ethernet ID labels to the replacement top case.
    This procedure removes the top case and keyboard assembly. The keyboard is removable 
    • 
    only after removing the top case.
    Place the computer upside down.
    1.  
    2.   Remove the six screws shown.  
    3.  Rotate the computer and remove the two screws along the front of the battery bay.   
    						
    							MacBook Pro Take Apart — Top Case 29
    4.
      Remove the four screws from each side.  
     
    5. Remove the two screws from the back edge.  
    . 
    						
    							MacBook Pro Take Apart — Top Case 30
    Face the computer forward and open the display slightly past 90-degrees. 
    6.  
    Use a black stick to loosen the top case along the rear of the left and right sides.  
    7.  
      
    						
    All Apple manuals Comments (0)

    Related Manuals for Apple macbook pro User Manual