Apple macbook pro User Manual
Have a look at the manual Apple macbook pro User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MacBook Pro Take Apart — Left I/O Board 121 Disconnect the cable. 3. Note: The ExpressCard cage is attached to the left I/O board. Disconnect the flex cable. 4.
MacBook Pro Take Apart — Left I/O Board 12 2 5. Remove the four screws. Lift off the card cage. 6.
MacBook Pro Take Apart — Left I/O Board 12 3 Replacement Note: 7. Install the EMI gasket. Replacement Note: 8. When the board is in place and the ports are seated, hold the power adapter port tightly against the port opening while installing screws. Replacement Note: 9. After securing the board, exercise the ExpressCard slot door to verify clearance.
MacBook Pro Take Apart — ExpressCard Cage 12 4 ExpressCard Cage Tools This procedure requires the following tools: #0 Phillips screwdriver (magnetized) • Preliminary Steps Before you begin, remove the following: Batter • y Top Cas • e AirPort Extreme • Card Left Ambient Light Senso • r Left Speake • r Left I/O Board •
MacBook Pro Take Apart — ExpressCard Cage 12 5 Part Location Procedure See the Left I/O Board chapter for removal of the ExpressCard cage.
MacBook Pro Take Apart — Bottom Case 126 Bottom Case Tools This procedure requires no tools. Preliminary Steps Before you begin, remove the following:Batter • y Top Cas • e AirPort Extreme Car • d Left Ambient Light Senso • r Right Ambient Light Sensor Len • s Speaker • s Fan • s Hard Driv • e Bluetoot • h Infrared Boar • d Optical Driv • e Backup Batter • y Logic Boar • d Left I/O Board • Right Speaker Chambe • r Heatsin • k Display Assembl • y
MacBook Pro Take Apart — Bottom Case 12 7 Part Location Procedure After the parts are removed in the preliminary steps, disconnect and remove the hard drive/ bluetooth/IR flex cable from the sleep LED cable. What’s left is the bottom case..
MacBook Pro Take Apart — Display Assembly 12 8 Display Assembly Tools This procedure requires the following tools: Torx T6 screwdriver (magnetized) • Black stick (nylon probe 922-5065) (or other non-conductive nylon or plastic flat-blade tool • Preliminary Steps Before you begin, remove the following: Batter • y Top Cas • e Part Location
MacBook Pro Take Apart — Display Assembly 129 Procedure Disconnect two antenna connectors. Lift straight up. Peel up Kapton tape to free. 1. Disconnect two cable connectors. 2. Disconnect the LVDS cable. 3.
MacBook Pro Take Apart — Display Assembly 130 Move the display to a 90-degree angle and remove the four clutch screws. 4. Important: Support the display from falling over before removing the last screw. Lift the display straight up and off of the computer without catching wires. 5.