Home
>
Aleratec
>
DVD/CD Stand Alone Duplicator
>
Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide
Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide
Here you can view all the pages of manual Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide. The Aleratec manuals for DVD/CD Stand Alone Duplicator are available online for free. You can easily download all the documents as PDF.
Page 51
www.aleratec.com45 Using the DVD/CD Copy Tower Pro HS 11.11 Burn On The Fly This setting should always be ON. Data will copy directly from the source drive to the target drives. 1. Default setting is ON; press the ENT button to change, or ESC to exit. 11.12 Burn Mode This setting is for CDs only, and controls the writing modes of the disc, including “Disc At Once” (DAO) or “Track At Once” (TAO). 1. Default setting is “DAO”. Press the ENT button to change, or ESC to exit. Burn On The Fly On ESCENT...
Page 52
www.aleratec.com46 Using the DVD/CD Copy Tower Pro HS Main Menu Setup - continued 11.13 Display Time This setting controls the time display. 1. Default setting is ON; press the ENT button to change, or ESC to exit. 11.14 Button Sound This setting controls the button sound. 1. Default setting is ON; press the ENT button to change, or ESC to exit. Display Time On ESCENT 11-13. Setup Display Time ESCENT Button Sound On ESCENT 11-14. Setup Button Sound ESCENT
Page 53
www.aleratec.com47 Using the DVD/CD Copy Tower Pro HS 11.15 Device Info This function will show information on the display. 1. Press the ENT button to see Device Information, using the UP and DOWN arrows to scroll through the devices, or ESC to exit. 11.16 System Info This function will show the system information on the display. 1. Press the ENT button to see the system information, or ESC to exit. System Info ESCENT 11-16. Setup System Info ESCENT 11-15. Setup System Info ESCENT
Page 54
www.aleratec.com48 Using the DVD/CD Copy Tower Pro HS Main Menu Setup - continued 11.17 Quick Erase Disc This function is used for quickly erasing discs. Note: The Quick Erase Disc simply deletes the directory track, rather than deleting all the data from the disc (contrast this with Full Erase Disc). 1. Press the ENT button to enter Quick Erase Disc, or ESC to exit. Use the arrow keys to select YES or NO, and then press the ENT button to execute, ESC to go back. 2. When the process is finished the...
Page 55
www.aleratec.com49 Using the DVD/CD Copy Tower Pro HS 2. When the process is finished the display will show the status. 11.19 Auto Close Tray When copying is completed, the tray of the DVD Recorder(s) will open so the copy may be removed. This command allows setting the time delay before the tray (of each DVD Recorder) will close. 1. Press the ENT button to enter choices selectable with the UP and DOWN arrows. Available time delays are 5, 10, 15, 20, 25, 30, 35, 40, 45, or 50 seconds. All data will...
Page 56
www.aleratec.com50 Using the DVD/CD Copy Tower Pro HS Main Menu Setup - continued 11.20 Quick Compare Quick Compare lets you set a certain byte. When the error of a target DVD is within the set byte, the comparison between the source DVD and the target DVD will stop. The comparison of the other 6 target DVDs will continue. 1. Press the ENT button and the DOWN arrow to enter the following figure. 2. Press the ENT button to enter the following figure. The default is OFF. Available selectable choices...
Page 57
www.aleratec.com51 Using the DVD/CD Copy Tower Pro HS Main Menu Advanced Setup Some advanced setup functions allows users to change the system configuration. Modification should only be made when you are fully familiar with all the functions. To enter this function, press and hold the ESC button for about 2 seconds. The main menu “Adv Setup” (Advanced Setup) function has 18 subfunctions. These are: 12.01 UnderRun Pro\btect 12.02 Overburn 12.0\f Read Error S\bi\bp 12.04 Format HDD 12.05 Verify HDD...
Page 58
www.aleratec.com52 Using the DVD/CD Copy Tower Pro HS Main Menu Advanced Setup - continued 12.01 UnderRun Protect This setting turns Buffer Under Run Protection (also known as “Burn Proof”, “SafeBurn”, “JustLink”, “Seamless Link”, etc.) ON or OFF. 1. Default setting is ON; press the ENT button to change, or ESC to exit. 12.02 Overburn (CDs Only) This function will allow you to burn a few MB more than the standard capacity of the target Audio CD (e.g. 75 minutes of recording time vs. 74 minutes). You...
Page 59
www.aleratec.com53 Using the DVD/CD Copy Tower Pro HS 12.03 Read Error Skip You can set error skipping function while reading discs with errors. The default setting is OFF. If an error is detected during source loading, the duplicator will stop loading and display the error message. If the setting is ON, there will be no message shown even if there is an error in reading. You can use this function to copy some DVDs with errors. 1. Press the ENT button to change, or ESC to exit. Read Error Skip Off ...
Page 60
www.aleratec.com54 Using the DVD/CD Copy Tower Pro HS Main Menu Advanced Setup - continued 12.04 Format HDD This function formats the Hard Disk Drive. Before formatting, all data on the hard disk will be deleted. 1. Press the ENT button to change, or ESC to exit. 2. Use the UP and DOWN arrows to select DVD, CD, or DL. In “DVD”, a partition occupies 5GB, in “CD” 1 GB, and in “DL” 10 GB. If you format once more, the old data will be lost. 3. If the controller cannot detect or connect with a hard disk,...