Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide

www.aleratec.com25
Using the DVD/CD Copy Tower Pro HS
9.3	Image	Info
This function shows the basic information about an image file stored in a 
particular partition.
1. Select the function by pressing the DOWN arrow.
2. Press ENT, and the LCD will display the information about the image file.
9-03. Image P:A
Image Info


ESCENT
Disc Type: DVD-ROM
Capacity: 4213.4MB


ESCENT  

www.aleratec.com26
Using the DVD/CD Copy Tower Pro HS
Main Menu
Image - continued 
9.4	Compare	Image
This function will compare the contents of the source DVD with the image 
file in the partition.
1. Select the function by pressing the DOWN arrow.
2. Press ENT, and the LCD will display the comparison information as 
shown.
3. When the comparison comes to an end, the LCD will display the results 
as shown.
4. Press ENT to see the details of source 1 as shown here.
9-04. Image P:A
Compare Image

...

www.aleratec.com27
Using the DVD/CD Copy Tower Pro HS
5. Press ENT to see the details of source 2. If the comparison is identical, 
the LCD will display the message as shown.
6. If the comparison fails, the LCD will show the failure. By pressing 
ENT twice, the LCD will display the contents of source 1 and those of 
source 2 do not match as shown.
Tgt: 00    HDD P:A
Identical


ESCENT
Tgt: 00    HDD P:A
TOC not match


ESCENT  

www.aleratec.com28
Using the DVD/CD Copy Tower Pro HS
Main Menu
Image - continued 
9.5	Select	Image
This function is used to select a partition on the Hard Disc.
1. Select the function by pressing the DOWN arrow.
2. After installing a hard disc, your copy controller will format it 
automatically. Each partition occupies 5GB. The number of partitions 
is dependent on the drive’s capacity. The partitions are designated 
alphabetically in sequence. Select a partition by pressing the UP and 
DOWN arrows, and...

www.aleratec.com29
Using the DVD/CD Copy Tower Pro HS
9.6	Select	Src	Drive
This function selects any of the DVD-Recorders as the source from which you 
can load data into a particular partition as an image file.
1. Select the function by pressing the DOWN arrow.
2. Then, use the UP and DOWN arrows to select any of the DVD-Recorders 
as the source.
3. After selecting the source, you can press ENT and the LCD will display 
the message showing the source.
9-06. Image P:A
Image Src Drive


ESCENT
Select...

www.aleratec.com30
Using the DVD/CD Copy Tower Pro HS
Main Menu
Image - continued 
9.7	Image	Format	Info
This function lets you see how you have formatted your hard drive. It is 
related to function 13.4 Format HDD. There are three choices of format: 
CD, DVD, and DL (double layer).
1. Select the function by pressing the DOWN arrow. Then, use the UP 
and DOWN arrows to select any of the DVD-Recorders.
2. Press ENT to see the display shown here. This display shows that the 
hard drive has been formatted...

www.aleratec.com31
Using the DVD/CD Copy Tower Pro HS
9.8	Edit
This function lets you name your partitions. Only when the partition 
contains an image can title editing be valid.
1. Select the function by pressing the DOWN arrow. Press ENT.
2. Now you can use the arrow keys to enter numbers (first sequence) 
or letters (second sequence). The title should be composed of 1 to 
13 characters (characters can be A, B, C, etc., or 1, 2, 3, etc., or any 
combination of both). After keying in the title, press...

www.aleratec.com32
Using the DVD/CD Copy Tower Pro HS
Main Menu
Edit Track
Edit Track is a function that allows you to create your own audio 
compilation CDs. Several tracks can be selected from different CDs and 
copied to one or more blank CDs. When copying audio CDs, it is highly 
recommended to copy at a speed of 16x or lower to ensure good quality 
audio reproduction. Go to “Setup” and then “Burning Speed” to change 
copy speed before selecting tracks.
This function includes 4 subfunctions. These...

www.aleratec.com33
Using the DVD/CD Copy Tower Pro HS
Main Menu
Edit Track
10.1	CD	to	CD	Edit
1. Insert a Source CD into one of the DVD Recorders and the number of 
blanks you want to record in the DVD Recorders.
2. Use UP Arrow or DOWN Arrow to scroll through the menu until “Edit 
Track” is displayed on the LCD screen. Press the ENT button to select 
or press ESC to go to the next setting.)
3. Select “CD to CD Edit” displayed on the LCD screen.
4. Press ENT and scroll to “Select Track” to select the...

www.aleratec.com34
Using the DVD/CD Copy Tower Pro HS
Main Menu
Edit Track - continued 
5. Repeat for all tracks you want to copy. Then use the arrow keys to 
move to END, then press the ENT button to finish disc editing. Use the 
arrow keys to make YES or NO selection. Select YES by pressing the 
ENT button.
6. The LCD will display the status of the copying process. At the 
completion of the copying process, the LCD will display the “Burn 
Complete!” message. Press the ENT button to continue to step 7....