Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide

www.aleratec.com35
Using the DVD/CD Copy Tower Pro HS
8. When you have finished and the display shows: “Continue Edit”, Next 
Disc? Yes”, use the arrow keys to make YES or NO selection. Select NO.
9. The system will ask to close the disc session. “Close all disc’s session? 
Yes”. Use the arrow keys to make YES or NO selection. Select YES.
10. LCD display will show the process of closing the session: “Closing 
Session Please Wait —”. 
Note: You will NOT be able to use the new audio CD until you close the...

www.aleratec.com36
Using the DVD/CD Copy Tower Pro HS
Main Menu
Edit Track - continued 
10.2	(Not	supported)
10.3	Play	Audio	Track	(CDs	Only)
By selecting “Play Audio” you can play music with your DVD/CD Copy 
Tower Pro. You can connect speakers to the headphone jack on any drive.
1. Load the CD you want to play in that drive and press the ENT button to 
play music. Press ESC to index to the next setting.
10-03 Edit Track
Play Audio Track


ESCENT
Select Track
1/10  04:25


ESCENT
Playing Track-1...

www.aleratec.com37
Using the DVD/CD Copy Tower Pro HS
10.4	Close	Session	(CDs	Only)
Selecting “Close Session” will finalize the CD; no further data can be 
added. This function will make the disc readable on a normal CD player.
1. Press the ENT button to enter the setting, or press ESC to index to the 
next setting.
2. The system will ask to close the disc session. “Close all disc’s session? 
Yes”. Use the arrow keys to make YES or NO selection. Select YES.
3. LCD display will show the process of closing...

www.aleratec.com38
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup
You can change the original default settings using this setup menu. There 
are different settings to control the duplicator’s operation. In general, using 
the original default settings for optimal performance is suggested.
This function includes 23 subfunctions. These are:
11.01 Language
11.02 CD Burn Speed\3
11.03 D\fD Burn Speed\3
11.04 Read Speed (\bax\3.)
11.05  Auto Drive Start
11.06 Startup Menu
11.07  Auto \f erify
11.08  Auto...

www.aleratec.com39
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup
11.01	Language	(Optional)
This function selects the language shown on the display (English, 
Traditional Chinese, Simplified Chinese, and Japanese). 
1. To select, press the ENT button, or ESC to exit.
11.02	CD	Burn	Speed
This setting controls the writing speed of the DVD Recorders when burning 
CDs. The default setting is “Auto”, which will use the highest writing speed 
of the recorders for the blank media being used. Sometimes...

www.aleratec.com40
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup - continued 
11.03	DVD	Burn	Speed
This setting controls the writing speed of the DVD Recorders when 
burning DVDs. The default setting is “Auto”, which will use the highest 
writing speed of the recorders for the blank media being used. Sometimes 
“Maximum” writing speed causes a high failure rate due to poor DVD 
quality or unstable DVD writing due to high speed. Lowering the writing 
speed will increase the probability of making...

www.aleratec.com41
Using the DVD/CD Copy Tower Pro HS
11.05	Auto	Start	Drive
The function of the Auto Start Drive is to copy or test automatically once 
blank DVDs are loaded into the DVD recorders. 
1. Default setting is OFF. Press ENT button to change, or ESC to exit. 
11.06	Startup	Menu
This function selects the menu item that will be the first item shown on the 
display when you turn on the duplicator. The default setting is Copy.
1. Use the arrow buttons to select the desired item (1 - 11), then...

www.aleratec.com42
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup - continued 
11.07	Auto	Verify
This setting controls auto verify on the target discs.
1. Default setting is OFF; press the ENT button to change, or ESC to exit.
11.08	 Auto	Compare
This setting controls auto compare of data between source and target discs 
after copying.
1. Default setting is OFF; press the ENT button to change, or ESC to exit.
11-07. Setup
Auto Verify


ESCENT
Auto Verify
Off


ESCENT
11-08. Setup
Auto Compare
...

www.aleratec.com43
Using the DVD/CD Copy Tower Pro HS
11.09	Auto	Prescan
This setting controls auto prescan of the master to verify that it can be read 
properly, and also tests the reading speed.
1. Default setting is OFF; press the ENT button to change, or ESC to exit.
11-09. Setup
Auto Prescan


ESCENTAuto Prescan
Off


ESCENT
11-09. Setup
Auto Prescan


ESCENT  

www.aleratec.com44
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup - continued 
11.10	Eject	Disc
This setting controls the ejection of discs by the DVD Recorders. Three 
options are available: “Eject Good Only”, “Eject All Disc”, and “Do Not 
Eject”.
1. “Eject Good Only” (default setting) will only eject the passed disc 
automatically and leave a failed disc in the DVD Recorders.
2. “Eject All Disc” will eject the disc, whether it has passed or failed.
3. If you select “Do Not Eject”, the disc will...