Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide

							www.aleratec.com35
Using the DVD/CD Copy Tower Pro HS
8. When you have finished and the display shows: “Continue Edit”, Next 
Disc? Yes”, use the arrow keys to make YES or NO selection. Select NO.
9. The system will ask to close the disc session. “Close all disc’s session? 
Yes”. Use the arrow keys to make YES or NO selection. Select YES.
10. LCD display will show the process of closing the session: “Closing 
Session Please Wait —”. 
Note: You will NOT be able to use the new audio CD until you close the 
session.
11. When the session is closed, this message will be displayed.
Continue edit
next Disc?  No


ESCENT
Close all disc’s
session?  Yes


ESCENT
Closing Session
Please wait - - -


ESCENT
Closing Complete
OK:03 Fail:0


ESCENT  
						

							www.aleratec.com36
Using the DVD/CD Copy Tower Pro HS
Main Menu
Edit Track - continued 
10.2	(Not	supported)
10.3	Play	Audio	Track	(CDs	Only)
By selecting “Play Audio” you can play music with your DVD/CD Copy 
Tower Pro. You can connect speakers to the headphone jack on any drive.
1. Load the CD you want to play in that drive and press the ENT button to 
play music. Press ESC to index to the next setting.
10-03 Edit Track
Play Audio Track


ESCENT
Select Track
1/10  04:25


ESCENT
Playing Track-1
00:00 / 03:35


ESCENT  
						

							www.aleratec.com37
Using the DVD/CD Copy Tower Pro HS
10.4	Close	Session	(CDs	Only)
Selecting “Close Session” will finalize the CD; no further data can be 
added. This function will make the disc readable on a normal CD player.
1. Press the ENT button to enter the setting, or press ESC to index to the 
next setting.
2. The system will ask to close the disc session. “Close all disc’s session? 
Yes”. Use the arrow keys to make YES or NO selection. Select YES.
3. LCD display will show the process of closing the session: “Closing 
Session Please Wait —”.
4. When the session is closed, this message will show the passed and 
failed discs.
10-04 Edit Track
Close Session


ESCENT
Close all disc’s
session? Yes


ESCENT
Close Session
Please Wait---


ESCENT
Close Complete
OK:03 Fail:0


ESCENT  
						

							www.aleratec.com38
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup
You can change the original default settings using this setup menu. There 
are different settings to control the duplicator’s operation. In general, using 
the original default settings for optimal performance is suggested.
This function includes 23 subfunctions. These are:
11.01 Language
11.02 CD Burn Speed\3
11.03 D\fD Burn Speed\3
11.04 Read Speed (\bax\3.)
11.05  Auto Drive Start
11.06 Startup Menu
11.07  Auto \f erify
11.08  Auto Co\bpare
11.09  Auto Prescan
11.10 Eject Disc
11.1 1 Burn On The Fly
11.12 Burn Mode
11.13 Display T i\be
11.14 Button Sound
11.15 Device Info
11.16 Syste\b Info
11.17 Quick Erase D\3isc
11.18 Full Erase Di\3sc
11.19  Auto Close T ray
11. SetupENT

ESC
11.20 Quick Co\bpare
11.21  Audio Burn Speed
11.22 BD Burn Speed\3 (Not Supported)
11.23 T ray Out (Not Supported)  
						

							www.aleratec.com39
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup
11.01	Language	(Optional)
This function selects the language shown on the display (English, 
Traditional Chinese, Simplified Chinese, and Japanese). 
1. To select, press the ENT button, or ESC to exit.
11.02	CD	Burn	Speed
This setting controls the writing speed of the DVD Recorders when burning 
CDs. The default setting is “Auto”, which will use the highest writing speed 
of the recorders for the blank media being used. Sometimes “Maximum” 
writing speed causes a high failure rate due to poor CD quality or unstable 
CD writing due to high speed. Lowering the writing speed will increase the 
probability of making successful copies.
1. Press the ENT button to change the setting, or ESC to exit.
2. Use the arrow buttons to select the desired speed, then press the ENT 
button. 
11-01. Setup
Language


ESCENT
11-02. Setup
CD Burn Speed


ESCENT
CD Burn Speed
Auto


ESCENT  
						

							www.aleratec.com40
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup - continued 
11.03	DVD	Burn	Speed
This setting controls the writing speed of the DVD Recorders when 
burning DVDs. The default setting is “Auto”, which will use the highest 
writing speed of the recorders for the blank media being used. Sometimes 
“Maximum” writing speed causes a high failure rate due to poor DVD 
quality or unstable DVD writing due to high speed. Lowering the writing 
speed will increase the probability of making successful copies.
1. Press the ENT button to change the setting, or ESC to exit.
2. Use the arrow buttons to select the desired speed, then press the ENT 
button.
11.04	Read	Speed
This function sets the reading speed of the source DVD Recorder.
1. Press the ENT button to change the setting, or ESC to exit.
2. Use the arrow buttons to select the desired reading speed, then press the 
ENT button.
11-03. Setup
DVD Burn Speed


ESCENT
Burn Speed
(Speed)


ESCENT
11-04. Setup
Read Speed


ESCENT
Read Speed
16X


ESCENT  
						

							www.aleratec.com41
Using the DVD/CD Copy Tower Pro HS
11.05	Auto	Start	Drive
The function of the Auto Start Drive is to copy or test automatically once 
blank DVDs are loaded into the DVD recorders. 
1. Default setting is OFF. Press ENT button to change, or ESC to exit. 
11.06	Startup	Menu
This function selects the menu item that will be the first item shown on the 
display when you turn on the duplicator. The default setting is Copy.
1. Use the arrow buttons to select the desired item (1 - 11), then press the 
ENT button.
11-05. Setup
Auto Start Drive


ESCENT
Auto Start Drive
Off


ESCENT
11-06. Setup
Startup Menu


ESCENT
Startup Menu
1.Copy


ESCENT  
						

							www.aleratec.com42
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup - continued 
11.07	Auto	Verify
This setting controls auto verify on the target discs.
1. Default setting is OFF; press the ENT button to change, or ESC to exit.
11.08	 Auto	Compare
This setting controls auto compare of data between source and target discs 
after copying.
1. Default setting is OFF; press the ENT button to change, or ESC to exit.
11-07. Setup
Auto Verify


ESCENT
Auto Verify
Off


ESCENT
11-08. Setup
Auto Compare


ESCENT
Auto Compare
Off


ESCENT  
						

							www.aleratec.com43
Using the DVD/CD Copy Tower Pro HS
11.09	Auto	Prescan
This setting controls auto prescan of the master to verify that it can be read 
properly, and also tests the reading speed.
1. Default setting is OFF; press the ENT button to change, or ESC to exit.
11-09. Setup
Auto Prescan


ESCENTAuto Prescan
Off


ESCENT
11-09. Setup
Auto Prescan


ESCENT  
						

							www.aleratec.com44
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup - continued 
11.10	Eject	Disc
This setting controls the ejection of discs by the DVD Recorders. Three 
options are available: “Eject Good Only”, “Eject All Disc”, and “Do Not 
Eject”.
1. “Eject Good Only” (default setting) will only eject the passed disc 
automatically and leave a failed disc in the DVD Recorders.
2. “Eject All Disc” will eject the disc, whether it has passed or failed.
3. If you select “Do Not Eject”, the disc will remain in the DVD 
Recorders when the job is done and you will have to eject the disc from 
the DVD Recorders manually. Press the ENT button to change the 
setting, or ESC to exit.
Eject Disc
Eject Good Only


ESCENT
11-10. Setup
Eject Disc


ESCENT
Eject Disc
Eject All Disc


ESCENT
Eject Disc
Do Not Eject


ESCENT