Home
>
Aleratec
>
DVD/CD Stand Alone Duplicator
>
Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide
Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide
Have a look at the manual Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
USER GUIDE Aleratec 1:3 DVD/CD Copy Tower Pro HS™ 1:7 DVD/CD Copy Tower Pro HS™ Part No. 260152 ........1:3 DVD/CD Copy Tower Pro HS™ Part No. 260153 ........1:7 DVD/CD Copy Tower Pro HS™
www.aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice. This manual is copyright with all rights reserved. Under copyright laws, this manual and the software described within may not be copied, except in the normal use of the product(s) described within or to make a backup copy. Copyright© 2013 Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. Aleratec® is a registered trademark, and 1:3 DVD/CD Copy Tower Pro HS™, and 1:7 DVD/CD Copy Tower Pro HS™ are trademarks of Aleratec, Inc Check out Aleratec Online! • Blog.Aleratec.com • Facebook.com/Aleratec • Twitter.com/Aleratec • YouTube.com/Aleratec Please record the following information to help expedite any warranty claim: Model No. _____________________Serial No. _____________________ Date Purchased ________________________________________________ Place of Purchase ______________________________________________
www.aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy. If it is not installed in accordance with the manufacturer’s instructions, it may cause interference with radio or television reception. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency ener gy. If not installed and used in accordance with the instruction manual, this equipment may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be verified by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an electrical outlet on a circuit that is different from the circuit to which the receiver is connected. • Consult your dealer or an experienced radio/TV technician for help. This equipment has been certified to comply with the limits for a Class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and/or modifications made to this equipment, without the approval of manufacturer, could void the user’s authority to operate this equipment.
www.aleratec.com Table of Contents Introduction .......................................................................................1 Product Features .....................................................................................1 Key Items – DVD/CD Copy Tower Pro HS ...........................................2 Removable Hard Disk Drive ..................................................................3 DVD/CD Copy Tower Pro HS Display Panel ........................................5 Precautions .......................................................................................6 Installation ..............................................................................................6 Input Voltage Selection ...........................................................................6 Operation ................................................................................................6 Transportation .........................................................................................6 Overview............................................................................................7 Main Menu ..............................................................................................7 Subfunctions ...........................................................................................8 Using the DVD/CD Copy Tower Pro HS ........................................11 Inserting Discs ......................................................................................11 Ejecting Discs .......................................................................................11 Power Up Sequence ..............................................................................12 Overview: Copies from Source DVD/CD ............................................12 Overview: Loading Disc Images and Making Copies from the Hard Disk Drive ....................................................................................12 Main Menu ............................................................................................13 Specifications .................................................................................63 Troubleshooting .............................................................................64 Technical Support ..........................................................................66 Service and Support.......................................................................67 Technical Support FAX Back Form ..............................................70
www.aleratec.com1 Introduction Thank you for purchasing the DVD/CD Copy Tower Pro HS. Please read this User Guide thoroughly before using this product. Product Features The DVD/CD Copy Tower Pro HS is a multiple disc DVD/CD Duplicator. The DVD/CD Copy Tower Pro HS is based on Dual-Standard 8-in-1 DVD±R/RW Technology, that supports all popular DVD formats. • High DVD recording speed for high-volume duplicating. • Powerful Control Features with LCD Display and intuitive menu maximizing copy control, flexibility, and output. • 1:3 DVD/CD Copy Tower Pro HS copies three DVDs simultaneously without a computer. • 1:7 DVD/CD Copy Tower Pro HS copies seven DVDs simultaneously without a computer. • Simple one-touch operation. • No additional hardware or software required. • Simple to use; no set-up required. Plug it in and start copying immediately. • Supports DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD-ROM, CD-R, CD-RW, Audio CD, Video CD, Hybrid CD, 120 mm, and mini CD (80 mm / 3 inch). • Automatically runs self-diagnostics at power-on. • Auto format detection.
www.aleratec.com2 Introduction Key Items – DVD/CD Copy Tower Pro HS 1:3 DVD/CD Copy Tower Pro HS 1:7 DVD/CD Copy Tower Pro HS Note: Choose a Good Location 1. Allow adequate clearance for moving parts. 2. Do not place near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. 3. Good care will help assure maximum product life. Improper operating environment and misuse may void the warranty. Display Panel Removable Hard Drive DVD Recorders (3) Power Switch Eject Button Display Panel Power Switch DVD Recorders (7) Eject Button Removable Hard Drive
www.aleratec.com3 Introduction Removable Hard Disk Drive Your Copy Tower Pro HS is equipped with a removable hard disk drive (HDD) for storing images of frequently copied discs. Storing an image of a disc you want to copy on an HDD improves duplication speed, and adds the convenience of not having to look around for the actual source disc you want to copy. Your removable HDD provides extra security, in that you can remove the drive containing the disc images and put it in a safe place where no un- authorized users can copy or view the data. The removable HDD is located in the top bay in the 1:7 tower and in the bay directly under the controller in the 1:3. The removable HDD includes a keyed lock to protect the data on the drive from being misused or stolen. The HDD is used in the copy process as described in the following pages of this user guide. Note: You can use the duplicator to copy directly from DVDs or CDs with or without the HDD. Just place your source disc in any of the DVDRW writers, then load the blank discs and press “Copy” and the duplicator will copy from your source disc. Removable Hard Disk Drive Key in Lock Carriage Lever
www.aleratec.com4 Introduction Removable Hard Disk Drive - continued To remove the HDD: 1. Unlock the HDD by inserting the key and turning it left (counterclockwise) 1/4 turn. The drive is now in the unlocked position. 2. Lift the HDD carriage lever upward and pull out. The HDD carriage will come out of the tower and a protective drive bay door will close. To replace the HDD: 1. Align the HDD carriage with the door opening and push the drive carriage through the protective drive bay door until you feel the drive seat in its connector. 2. Push the HDD carriage lever down, then insert your key and turn it 1/4 turn to the right (clockwise). The HDD is now in its locked position. You can remove the key. Note: The HDD will not work unless it is secured in position with the carriage lever and locked with the key. Do not unlock the HDD during operation, as you will destroy any copies you are making.