Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide

							www.aleratec.com45
Using the DVD/CD Copy Tower Pro HS
11.11	Burn	On	The	Fly
This setting should always be ON. Data will copy directly from the source 
drive to the target drives.
1. Default setting is ON; press the ENT button to change, or ESC to exit.
11.12	Burn	Mode
This setting is for CDs only, and controls the writing modes of the disc, 
including “Disc At Once” (DAO) or “Track At Once” (TAO).
1. Default setting is “DAO”. Press the ENT button to change, or ESC to 
exit.
Burn On The Fly
On


ESCENT
11-11. Setup
Burn On The Fly


ESCENT
Burn Mode
DAO


ESCENT
11-12. Setup
Burn Mode


ESCENT  
						

							www.aleratec.com46
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup - continued 
11.13	Display	Time
This setting controls the time display. 
1. Default setting is ON; press the ENT button to change, or ESC to exit.
11.14	Button	Sound
This setting controls the button sound. 
1. Default setting is ON; press the ENT button to change, or ESC to exit.
Display Time
On


ESCENT
11-13. Setup
Display Time


ESCENT
Button Sound
On


ESCENT
11-14. Setup
Button Sound


ESCENT  
						

							www.aleratec.com47
Using the DVD/CD Copy Tower Pro HS
11.15	Device	Info
This function will show information on the display.
1. Press the ENT button to see Device Information, using the UP and 
DOWN arrows to scroll through the devices, or ESC to exit. 
11.16	System	Info
This function will show the system information on the display.
1. Press the ENT button to see the system information, or ESC to exit.
System Info

ESCENT
11-16. Setup
System Info


ESCENT
11-15. Setup
System Info


ESCENT  
						

							www.aleratec.com48
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup - continued 
11.17	Quick	Erase	Disc
This function is used for quickly erasing discs. 
Note: The Quick Erase Disc simply deletes the directory track, rather than 
deleting all the data from the disc (contrast this with Full Erase Disc).
1. Press the ENT button to enter Quick Erase Disc, or ESC to exit. Use 
the arrow keys to select YES or NO, and then press the ENT button to 
execute, ESC to go back.
2. When the process is finished the display will show the status.
11.18	Full	Erase	Disc
This function is similar to the [Quick Erase Disc], except it removes all the data 
from the disc. The more data on the disc, the longer time it takes to erase the disc.
1. Press the ENT button to enter Full Erase Disc, or ESC to exit. Use the arrow 
keys to select YES or NO and then press the ENT button to execute, ESC to 
go back.
All data will be
lost, erase? Yes


ESCENT
11-17. Setup
Quick Erase Disc


ESCENT
Quick Erase
OK:01 Fail:00


ESCENT
Erasing disc
00:24  (Quick)


ESCENT  
						

							www.aleratec.com49
Using the DVD/CD Copy Tower Pro HS
2. When the process is finished the display will show the status.
11.19	Auto	Close	 Tray
When copying is completed, the tray of the DVD Recorder(s) will open so the 
copy may be removed. This command allows setting the time delay before the 
tray (of each DVD Recorder) will close. 
1. Press the ENT button to enter choices selectable with the UP and DOWN 
arrows. Available time delays are 5, 10, 15, 20, 25, 30, 35, 40, 45, or 50 
seconds.
All data will be
lost, erase? Yes


ESCENT
11-18. Setup
Full Erase


ESCENT
Full Erase
OK:01  Fail:00


ESCENT
Erasing Disc
00:24  (Full)


ESCENT
Auto Close Tray
5


ESCENT
11-19. Setup
Auto Close Tray


ESCENT  
						

							www.aleratec.com50
Using the DVD/CD Copy Tower Pro HS
Main Menu
Setup - continued 
11.20	Quick	Compare
Quick Compare lets you set a certain byte. When the error of a target DVD is within 
the set byte, the comparison between the source DVD and the target DVD will stop. 
The comparison of the other 6 target DVDs will continue. 
1. Press the ENT button and the DOWN arrow to enter the following figure. 
2. Press the ENT button to enter the following figure. The default is OFF. 
Available selectable choices with the UP and DOWN arrows are 100MBytes, 
10MBytes, 1MByte, 100KBytes, 10KBytes, 1KByte, 1Byte.
11.21	Audio	Burn	Speed
Audio Burn Speed lets you control the burning speed of audio CDs. 
1. Press the ENT button and the DOWN arrow to enter the following figure. 
2. Press the ENT button to enter the following figure. The default is Auto. 
Available selectable choices with the UP and DOWN arrows are 48x, 40x, 32x, 
24x, 20x, and 16x. Aleratec recommends a burn speed of 16x for highest qualilty 
audio reproduction.
11-20. Setup
Quick Compare


ESCENT
Quick Compare
Off


ESCENT
11-21. Setup
Audio Burn Speed


ESCENT
Audio Burn Speed
Auto


ESCENT  
						

							www.aleratec.com51
Using the DVD/CD Copy Tower Pro HS
Main Menu
Advanced Setup
Some advanced setup functions allows users to change the system 
configuration. Modification should only be made when you are fully 
familiar with all the functions. To enter this function, press and hold the 
ESC button for about 2 seconds.
The main menu “Adv Setup” (Advanced Setup) function has 18 
subfunctions. These are:
12.01 UnderRun Pro\btect
12.02 Overburn
12.0\f Read Error S\bi\bp
12.04 Format HDD
12.05 Verify HDD
12.06 Burn-in
12.07 Update Firmw\bare
12.08 Compare Firm\bware
12.09 Hardware Dia\bgnostic
12.10 Load Default\b
12.11 CD&G Format (Not Supported)
12.12 ISRC & MCN
12.1\f Switch Lin\b-Ho\bst (Not Supported)
12.14 CD T ext
12.15 Password
12.16 Disc Counter\b
12.17 Auto Save Image (Not Supported)
12. Adv SetupENT

ESC
12.18 Update Drive\b Firmware (Not Supported)  
						

							www.aleratec.com52
Using the DVD/CD Copy Tower Pro HS
Main Menu
Advanced Setup - continued 
12.01	UnderRun	Protect
This setting turns Buffer Under Run Protection (also known as “Burn Proof”, 
“SafeBurn”, “JustLink”, “Seamless Link”, etc.) ON or OFF.
1. Default setting is ON; press the ENT button to change, or ESC to exit.
12.02	Overburn	(CDs	Only)
This function will allow you to burn a few MB more than the standard capacity 
of the target Audio CD (e.g. 75 minutes of recording time vs. 74 minutes).
You can activate the overburn function of the DVD/CD-Recorder through this 
setting.
1. Default setting is OFF; press the ENT button to change, or ESC to exit.
UnderRun Protect
On


ESCENT
12-01. Adv Setup
UnderRun Protect


ESCENT
Overburn
Off


ESCENT
12-02. Adv Setup
Overburn


ESCENT  
						

							www.aleratec.com53
Using the DVD/CD Copy Tower Pro HS
12.03	Read	Error	Skip
You can set error skipping function while reading discs with errors. The default 
setting is OFF. If an error is detected during source loading, the duplicator 
will stop loading and display the error message. If the setting is ON, there 
will be no message shown even if there is an error in reading. You can use this 
function to copy some DVDs with errors.
1. Press the ENT button to change, or ESC to exit.
Read Error Skip
Off


ESCENT
12-03. Adv Setup
Read Error Skip


ESCENT  
						

							www.aleratec.com54
Using the DVD/CD Copy Tower Pro HS
Main Menu
Advanced Setup - continued 
12.04	Format	HDD
This function formats the Hard Disk Drive. Before formatting, all data on 
the hard disk will be deleted.
1. Press the ENT button to change, or ESC to exit.
2. Use the UP and DOWN arrows to select DVD, CD, or DL. In “DVD”, 
a partition occupies 5GB, in “CD” 1 GB, and in “DL” 10 GB. If you 
format once more, the old data will be lost.
3. If the controller cannot detect or connect with a hard disk, the display 
will be as shown here.
12-04. Adv Setup
Format HDD


ESCENT
HD Partition
FormatSelect? DVD


ESCENT
There is no HDD!

ESCENT