Aleratec 17 DVDCD Copy Tower Pro HS Stand Alone DVD CD Duplicator User Guide

www.aleratec.com15
Using the DVD/CD Copy Tower Pro HS
Main Menu
Test & Copy
This function will run Test described above before automatically starting the 
Copy Function. 
1. Press the ENT button to start the test and copy process. Before starting 
the Copy function, the Test function as described above will be 
performed.
2. When testing is completed, the duplicator will start writing data onto 
the DVD/CD-R/RW disc. When the process is completed, the LCD will 
display the status.
3. When the process is...

www.aleratec.com16
Using the DVD/CD Copy Tower Pro HS
Main Menu
Verify
This will verify that the disc copies can be read correctly in a DVD-ROM 
after duplication. Leave the source disc in the DVD Recorder, and the 
duplicate discs in the DVD Recorders will be verified simultaneously.
1. Press the ENT button to start disc verifying, or press ESC to exit.
2. The LCD will display the status of the verification.
3. When the process is completed, the LCD will display the result.
4. Verify

ESCENT
Verify-...

www.aleratec.com17
Using the DVD/CD Copy Tower Pro HS
Main Menu
Compare
This function will compare the data on the source disc to the target discs 
after disc copy.
1. Press the ENT button to do the disc compare, or press ESC to exit. 
Press the ENT button again to show detailed “Compare” information. 
The LCD display shows information for the source.
2. When the comparison is completed, the LCD will display the result.
3. Press ENT again for the status of each copy.
4. If the compare result is...

www.aleratec.com18
Using the DVD/CD Copy Tower Pro HS
Main Menu
Compare - continued 
5. If the comparison fails, the LCD will display the number of discs that 
failed and passed.
6. Press the ENT button again for the status of each copy. If the 
comparison fails, the LCD will display the reason for the failure.
Compare OK: 2
Fail: 1 Diff: 0


ESCENT
Src: 02 DVD-RW
TOC not match


ESCENT  

www.aleratec.com19
Using the DVD/CD Copy Tower Pro HS
Main Menu
Prescan
The function will scan the source disc and determine if it can be read 
correctly and test the reading speed. The reading speed of source disc 
should be higher than the writing speed for the target disc(s).
1. Press the ENT button to prescan the disc, or press ESC to exit.
2. The LCD will display the status of the prescan.
3. If a disc can be read correctly, the LCD will display OK.
4. If it cannot read the source disc correctly,...

www.aleratec.com20
Using the DVD/CD Copy Tower Pro HS
Main Menu
Disc Info
This function will show the track information of the source disc.
1. Press the ENT button to show the disc information, or press	ESC to exit.
2. DVD display (or) CD display
3. Press the ENT button again and the LCD will display the time and 
capacity of the source disc.
4. Press the ENT button again, and use the arrow keys to display 
information on the sessions.
5. Press the ENT button again, and use the arrow keys to display...

www.aleratec.com21
Using the DVD/CD Copy Tower Pro HS
Main Menu
Select Source
Select Source will change the drive position for the master/source disc or 
disk. The source can be selected from DVD Recorders or HDD (Hard Disk 
Drive).
1. Press the ENT button and arrow button to select the source, or press 
ESC to exit.
2. Use the arrow keys to select HDD or DVD Recorder as source drive.
3. When the source is selected, press the ENT button again.
8. Select Source

ESCENT
Src: 01 HDD
01      IDEO  Master...

www.aleratec.com22
Using the DVD/CD Copy Tower Pro HS
Main Menu
Image
This function includes 8 subfunctions. These are:
9.1 Load
9.2 Delete Image
9.3 Image Info
9.4 Compare Image
9.5 Select Image
9.6 Select Src Drive
9.7 Image Format Info
9.8 Edit
9. ImageENT

ESC  

www.aleratec.com23
Using the DVD/CD Copy Tower Pro HS
Main Menu
Image
This function deals with loading data onto the hard disc, called an image file.
9.1	Load
To load the image file to the Hard Drive, follow this procedure:
1. Press ENT to enter Image mode, or press ESC to exit.
2. Press ENT to load. 
3. The LCD shows loading information.
4. After the image file is successfully loaded, the LCD shows the results. 
5. If there is an image file in the current partition, the system will ask you 
whether to...

www.aleratec.com24
Using the DVD/CD Copy Tower Pro HS
Main Menu
Image - continued 
9.2	Delete	Image
If you want to empty an image file stored in a particular partition, you can use 
the function Delete Image to do so.
1. Select the function by pressing the DOWN arrow.
2. The system will ask if you are sure you wish to delete. Use the UP or 
DOWN arrow to confirm YES or NO.
3. After the image file is deleted, the LCD will display the result as shown.
9-02. Image P:A
Delete Image


ESCENT
Delete Image in...