AIPTEK Pocketcinema N100 Users Manual

							User’s Manual  
             Page 1
EN 
Welcome   Thank you very much for purchasing this product. Before you start, you are 
recommended to read this manual step by step to obtain the best results with your 
new Pico projector. We wish you enjoy it.   
 
About the product 
 
This is the latest generation of Pico projector with DLP technology inside. Known for 
great cinema projectors, the DLP technology provides rich colours and enhances the 
contrast of the image. The Pico projector offers versatile connection options including 
HDMI, MHL and VGA port and projecting the images up to 120’’ (300 cm) in size. This 
Pico projector is the best solution for mobile use in business and entertainment.   
 
 
Safety Notice 
1.  Keep the device and packaging materials out of the reach of infants and children. 
2.  Avoid subjecting the power adapter and other contacts to dripping or splashing 
water and dry your hands before you use it. Do not place objects filled with liquids 
such as vases, etc. on or near the device. 
3.  Make sure that the used power outlet is always readily available and never hidden. 
In case of emergency, use the power adapter to separate the device from the power 
network. 
4.  Keep your device away from all flames such as candles and do not set them up in 
the vicinity of the device. 
5.  Keep the unit at least 10 cm away from other objects. Make sure the ventilation is 
not covered by newspapers, tablecloths, curtains, etc. 
6.  For your own safety, do not use the projector during thunderstorms or lightning. 
7.  Relative Humidity is 20% ~ 80%, non-condensing. 
8.  The battery is integrated with the device. Do not dissemble and modify. The battery 
should be replaced by an authorized service center only. 
9.  Ensure that the ambient room temperature is within 5 ~ 35°C 
10.  Wait before using if the device has been moved from a cold location into a warm one. 
Any condensation that has formed may in certain circumstances destroy the device. 
As soon as the device has reached room temperature it can be used without risk. 
11.  Handle the product with care. Avoid contact with sharp objects. Keep device away 
from metallic objects. 
12.  Place the projector on a flat surface. Any collision or falling to the ground is likely to 
damage the product. 
13.  Do not drop or disassemble the product otherwise the warranty voids. Opening or 
removing covers may expose you to dangerous voltage or other hazards. Refer all 
servicing to an authorized service center. 
14.  Use only the accessories supplied by the manufacturer. 
Downloaded From projector-manual.com Aiptek Manuals 
						

							User’s Manual  
             Page 2
EN 
15.  Both product and user’s manual are subject to further improvement or supplement 
without further notice. 
 
Care and Safety Information for Pico Projectors 
 
1.  Avoid facing directly into the projector’s lens. 
2.  During the operation, this product may heat 
lightly, which is normal. 
3.  The device should not be used in a very dusty 
environment. Dust particles and other foreign 
objects may damage the unit. 
4.  Do not expose the device to extreme vibrations. It 
may damage the internal components. 
5.    Use the enclosed power adapter (see technical data):   
Check whether the mains voltage of the power supply matches the mains voltage 
available at the setup location. This equipment complies with the voltage type 
specified on the unit.   
 
 
 
 
 
 
 
Notice for Long-time Projection
 
 
The built-in battery supports approximately 150 mins of projection. For long time 
projection, you are recommended to use AC adapter.   
 
When the battery is too weak to stay in operation, the low battery capacity icon (
) 
will flash. You need to charge the product while the icon showed. 
 
It’s normal that the projector will feel warm with continuous use due to its high 
performance. If the projector runs for a long time and over-heated, the 
High-Temperature icon (
) will appear on the screen. The system will automatically 
enter the standby mode. 
 
Avoid Hearing Damage:Listening at high volume for a long 
period of time could cause damage 
to your ears. 
Downloaded From projector-manual.com Aiptek Manuals 
						

							User’s Manual  
             Page 3
EN 
FCC Compliance Statement:  
This device complies with Part 15 of the FCC Rules. Operation is 
subjected to the following two conditions: (1) this device may not 
cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation. 
 
This equipment has been tested and found to comply with limits for a Class B digital 
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference in residential installations. This 
equipment generates, uses, and can radiate radio frequency energy, and if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. 
However, there is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause interference to radio or television equipment reception, 
which can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures: 
 
-  Reorient or relocate the receiving antenna. 
-  Move the equipment away from the receiver. 
-  Plug the equipment into an outlet on a circuit different from that to which the receiver 
is connected. 
-  Consult the dealer or an experienced radio/television technician for additional 
suggestions. 
 
You are cautioned that any change or modifications to the equipment not expressly 
approved by the party responsible for compliance could void your authority to operate 
such equipment. 
 
 If the time arises to throw away your 
product, please recycle all the 
components possible. Batteries and 
rechargeable batteries are not to be 
disposed in your domestic waste! 
Please recycle them at your local 
recycling point. 
 
Together we can help to protect the 
environment. 
Downloaded From projector-manual.com Aiptek Manuals 
						

							User’s Manual  
             Page 4
EN 
Table of Content 
About the Product, Safety Notice 
1 
Package Content 
4 
Knowing Your Device 
5 
Getting Started 
7 
Projecting from External Video Input Source 
8 
HDMI, VGA 
9 
Smartphone & Tablets 
12 
Charging the external mobile devices 
12 
Trouble Shooting 
13 
Specifications 
14 
 
 
 
 
 
 
Package Content 
 Please check if the following items are located in your packaging: 
 
Pico Projector 
Power Adapter 
Exchangeable Power Plug 
Remote Control 
HDMI Cable (A to A type) 
MHL Cable (HDMI A to USB D type) 
Carry Bag 
User’s Manual 
 
Downloaded From projector-manual.com Aiptek Manuals 
						

							User’s Manual  
             Page 5
EN 
   
Knowing your Device  
Projector 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Control Panel 
 
 
 
 
 
 
 
 
 
Menu
OK
DownExit 
Infrared Receiver 
DC IN HDMI / MHL ConnectorUSB Connector (for Mobile Charging)
Tripod Socket 
Speaker Connector Focus Lever  Projection Lens 
Speaker 
Keypad 
Ventilation 
VGA Port 
Ventilation 
Power
Source(External video input)
Up 
Left 
/Aspect ratioRight /   
Scene mode
Downloaded From projector-manual.com Aiptek Manuals 
						

							User’s Manual  
             Page 6
EN 
Remote Control 
 
 
 
Installing the Remote Control Battery 1.  Remove the battery holder by holding down the side 
releasefirmly and pulling out the battery holder.   
 
2.  Insert a CR2025 coin cell battery and align the polarity correctly 
according to the marking in the battery holder. 
 
Note:  When you use the remote control for the first time, there is 
a plastic sheet between the battery and its contact. 
Remove the sheet before use.   
 
3.  Insert the battery holder. 
 
 
Warning:
 
Improper use of the battery may cause overheating, explosion or ignition, which can 
result in an injury or a fire. Battery leakage may damage the remote controller. 
Do not expose the remote controller unit to direct sunlight. 
Do not expose the battery to fire or water. 
Immediately replace the exhausted battery. 
Take out battery when the remote is not in use for a long time.   
 
Left/ Aspect ratio 
Exit  
Right/ Scene mode 
Power 
Lens mode 
Volume Down 
Menu Scene modeSource
Brightness
 
Down OK
Volume Up
Up
Downloaded From projector-manual.com Aiptek Manuals 
						

							User’s Manual  
             Page 7
EN 
Operating Range with Remote Control 
 
 
Note:  Actual operating range may slightly differ from the diagram. Additionally, a weak 
battery reduces or eliminates the operating range of the remote control. 
 
Getting Started  Charging the product The projector is built in a Li-Polymer battery for 
mobile use. Please charge the projector for 8 
hours prior to its first use. Repeat charging will 
take around 4 hours. The battery will be charged 
only when the projector is not in use (Power off). Connect one end of the supplied AC 
adapter to DC IN jack and the other end to a power outlet to start charging. 
Exchange the plug (EU, US and etc.) of AC adapter that accommodates the type of 
power outlet in your country if it’s different. 
 
Charging LED Indicator During charging, the LED on Power button turns Orange. It turns to Green when the 
battery is fully charged. 
 
Turn On / Off the Projector Push the Power button for 2 seconds to turn on the projector. 
To turn off the projector, push the Power button downward for 2 seconds. 
 
Standby mode:  Push the Power button for 1 second to turn on/ off the projector lamp 
for a short break to save the battery and system reboot time. (The LED 
on buttons are still on when the projector is in standby mode.) 
 
Downloaded From projector-manual.com Aiptek Manuals 
						

							User’s Manual  
             Page 8
EN 
Adjusting the Focus according to distance    
Place the projector on a flat surface and 
toward a wall or a projection screen. The 
projectional distance and projectional size are:   
 
Distance    : 50 cm ~ 425 cm (20 ” ~ 167 ”) 
Image size: 36 cm ~ 305 cm (14 ” ~ 120 ”)   
 
Adjust the focus by turning the Focus Lever 
upward or downward to get a sharp and clear 
picture.  
 
Note: Use a tripod (not included) to increase the height of the projectional image when 
necessary. The tripod socket is located under the projector. 
 
 
 
 
 
Projecting from External Video Input Source  
The projector has built-in multiple interface on the rear side. You can connect your 
external video Input source to the projector by using the appropriate cable and press 
the Source key on the control panel of the projector to select the input source. 
 
 
 
Downloaded From projector-manual.com Aiptek Manuals 
						

							User’s Manual  
             Page 9
EN 
HDMI  
 
Use the HDMI cable to connect the HDMI port 
on the rear panel of the projector to the external 
HDMI signal source. After connected, the 
screen switches to HDMI source automatically. 
 
 
 
 
 
 
 
 
 
 
 
 
VGA  
 
Use a VGA cable to connect the VGA port on 
the rear panel of the projector to the external 
VGA signal source. After connected, press the 
Source button on the remote control or control 
panel to select VGA source. 
 
Note: VGA cable is not included in standard package. 
 
 
 
 
 
 
 
 
 
 
 
 
Downloaded From projector-manual.com Aiptek Manuals 
						

							User’s Manual  
             Page 10
EN 
Changing Playback Setting for External Video Source   
 
Press /Menu on control panel or remote control to enter the playback setting.   
 
    
     
1. Aspect ratio 
 
When the video file is in 4:3 aspect ratio, this function allows you to adjust 
how the image should appear on the 16: 9 screen. 
 
Press ◎/OK to display the options.     
1)  Pan & Scan: the image is scaled up to fit to 16:9 screen.   
2)  Letterbox: the image is displayed by original aspect ratio. 
 
Illustration for the Aspect ratio setting: 
Source Screen 
4:3 Aspect Ratio 
 
Projection Screen 
Pan & Scan (16:9) 
 Letterbox (16:9)  
 
 
2. Brightness
 
 
It allows you to change the brightness according to the environment and the 
power consumption.   
Downloaded From projector-manual.com Aiptek Manuals