Acer Ferrari One Service Guide
Here you can view all the pages of manual Acer Ferrari One Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 71
Chapter 361 13.Pry up the Upper Cover starting from the side and lift away. 14.Remove the I/O board to main board cable.
Page 72
62Chapter 3 Removing the Button Board IMPORTANT: The Touchpad Board cannot be removed individually. To replace the Button Board, replace the entire Upper Cover. 1.See “Removing the Upper Cover” on page 58. 2.Unlock the touchpad cable at both ends. 3.Remove the touchpad cable. 4.Disconnect the button board cable from the button board.
Page 73
Chapter 363 5.Pull the button board cable away from the adhesive. 6.Remove the button board cable. 7.Remove the two (2) screws of the button board. StepScrewQuantityScrew Type. Button Board DisassemblyM2-0.4*2 2
Page 74
64Chapter 3 8.Lift the button board away.
Page 75
Chapter 365 Removing the Bluetooth Module 1.See “Removing the Upper Cover” on page 58. 2.Disconnect the Bluetooth module to main board cable. 3.Pull the Bluetooth module away.
Page 76
66Chapter 3 Removing the I/O Board 1.See “Removing the Upper Cover” on page 58. 2.Open the locking latch at both ends of the card reader cable connectors. 3.Remove the card reader cable. 4.Disconnect the DC power cable connector from the mainboard.
Page 77
Chapter 367 5.Remove the tape and lift the DC cable out of the cable guide. 6.Disconnect the DC power cable from the I/O board. 7.Remove the one (1) screw in the I/O board. StepScrewQuantityScrew Type. IO Board Disassembly 2*5 1
Page 78
68Chapter 3 8.Lift the I/O board up by the inner edge and pull away on the angle.
Page 79
Chapter 369 Removing the LCD Module 1.See “Removing the Upper Cover” on page 58. 2.See “Removing the I/O Board” on page 66. 3.Lift up the LCD cable protective over. 4.Disconnect the LCD cable connector.
Page 80
70Chapter 3 5.Remove the two (2) screws from the left and right hinges of the LCD module. 6.Lift away the LCD module and lay it down. NOTE: Lay the LCD down on a clear smooth surface to prevent damage. 7.Pull the antenna cables free of the chassis, threading the antenna cables through from the bottom side.. 8.Remove the LCD module completely. StepScrewQuantityScrew Type. LCD Disassembly 2*5 2