Acer Ferrari One Service Guide
Here you can view all the pages of manual Acer Ferrari One Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 101
Chapter 391 LCD Reassembly Procedure Replacing the Antennas 1.Adhere the Right Antenna Pad (yellow and blue cable) to the LCD cover. 2.Adhere the Left Antenna Pad (white and blue cable) to the LCD Cover. 3.Insert the antenna cables into the retention guides around the top left corner of the LCD cover and then mount the magnet.
Page 102
92Chapter 3 4.Insert the antenna cables into the retention guides around both sides. 5.Flatten the four (4) foil tabs on each corner.
Page 103
Chapter 393 Replacing the FPC Cable 1.Pull back the foil from the panel and lay the FPC cable on the panel 2.Apply adhesive and press down the FPC cable microphone extension. CAUTION: Ensure that the microphone is properly aligned with the top of the panel. 3.Connect the FPC cable connector.
Page 104
94Chapter 3 4.Press down the clear FPC connector protective cover. 5.Apply adhesive and press down the FPC cable sleeve. 6.Press the foil back down on top of the FPC cable.
Page 105
Chapter 395 Replacing the LCD Brackets 1.Replace the four (4) screws in the left and right brackets. Replacing the LCD Panel 1.Place the LCD panel on the cover. StepScrewQuantityScrew Type. LCD Bracket Assembly 2*2.5 (silver) 4
Page 106
96Chapter 3 2.Replace the four (4) screws. 3.Apply adhesive and press the microphone into place. StepScrewQuantityScrew Type. LCD Panel Disassembly2*3 4
Page 107
Chapter 397 Replacing the Camera Board 1.Place the camera onto the LCD cover. 2.Connect the cable to the Camera Board Replacing the LCD Bezel 1.Place the bezel hinge cover over the hinges and ensure the wiring is correctly routed under the center hinge pin.
Page 108
98Chapter 3 2.Press the bezel down around the edges.
Page 109
Chapter 399 3.Replace the two (2) screws. 4.Replace the two screw covers. StepScrewQuantityScrew Type. LCD Bezel Assembly 2*5 2
Page 110
100Chapter 3 Main Unit Reassembly Process Replacing the Speaker Module 1.Place the speaker module onto the lower cover. 2.Replace the three (3) screws StepScrewQuantityScrew Type. Speaker Module Assembly2*3 3