Acer Ferrari One Service Guide
Have a look at the manual Acer Ferrari One Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 391 LCD Reassembly Procedure Replacing the Antennas 1.Adhere the Right Antenna Pad (yellow and blue cable) to the LCD cover. 2.Adhere the Left Antenna Pad (white and blue cable) to the LCD Cover. 3.Insert the antenna cables into the retention guides around the top left corner of the LCD cover and then mount the magnet.
92Chapter 3 4.Insert the antenna cables into the retention guides around both sides. 5.Flatten the four (4) foil tabs on each corner.
Chapter 393 Replacing the FPC Cable 1.Pull back the foil from the panel and lay the FPC cable on the panel 2.Apply adhesive and press down the FPC cable microphone extension. CAUTION: Ensure that the microphone is properly aligned with the top of the panel. 3.Connect the FPC cable connector.
94Chapter 3 4.Press down the clear FPC connector protective cover. 5.Apply adhesive and press down the FPC cable sleeve. 6.Press the foil back down on top of the FPC cable.
Chapter 395 Replacing the LCD Brackets 1.Replace the four (4) screws in the left and right brackets. Replacing the LCD Panel 1.Place the LCD panel on the cover. StepScrewQuantityScrew Type. LCD Bracket Assembly 2*2.5 (silver) 4
96Chapter 3 2.Replace the four (4) screws. 3.Apply adhesive and press the microphone into place. StepScrewQuantityScrew Type. LCD Panel Disassembly2*3 4
Chapter 397 Replacing the Camera Board 1.Place the camera onto the LCD cover. 2.Connect the cable to the Camera Board Replacing the LCD Bezel 1.Place the bezel hinge cover over the hinges and ensure the wiring is correctly routed under the center hinge pin.
98Chapter 3 2.Press the bezel down around the edges.
Chapter 399 3.Replace the two (2) screws. 4.Replace the two screw covers. StepScrewQuantityScrew Type. LCD Bezel Assembly 2*5 2
100Chapter 3 Main Unit Reassembly Process Replacing the Speaker Module 1.Place the speaker module onto the lower cover. 2.Replace the three (3) screws StepScrewQuantityScrew Type. Speaker Module Assembly2*3 3