Acer Ferrari One Service Guide
Have a look at the manual Acer Ferrari One Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 361 13.Pry up the Upper Cover starting from the side and lift away. 14.Remove the I/O board to main board cable.
62Chapter 3 Removing the Button Board IMPORTANT: The Touchpad Board cannot be removed individually. To replace the Button Board, replace the entire Upper Cover. 1.See “Removing the Upper Cover” on page 58. 2.Unlock the touchpad cable at both ends. 3.Remove the touchpad cable. 4.Disconnect the button board cable from the button board.
Chapter 363 5.Pull the button board cable away from the adhesive. 6.Remove the button board cable. 7.Remove the two (2) screws of the button board. StepScrewQuantityScrew Type. Button Board DisassemblyM2-0.4*2 2
Chapter 365 Removing the Bluetooth Module 1.See “Removing the Upper Cover” on page 58. 2.Disconnect the Bluetooth module to main board cable. 3.Pull the Bluetooth module away.
66Chapter 3 Removing the I/O Board 1.See “Removing the Upper Cover” on page 58. 2.Open the locking latch at both ends of the card reader cable connectors. 3.Remove the card reader cable. 4.Disconnect the DC power cable connector from the mainboard.
Chapter 367 5.Remove the tape and lift the DC cable out of the cable guide. 6.Disconnect the DC power cable from the I/O board. 7.Remove the one (1) screw in the I/O board. StepScrewQuantityScrew Type. IO Board Disassembly 2*5 1
68Chapter 3 8.Lift the I/O board up by the inner edge and pull away on the angle.
Chapter 369 Removing the LCD Module 1.See “Removing the Upper Cover” on page 58. 2.See “Removing the I/O Board” on page 66. 3.Lift up the LCD cable protective over. 4.Disconnect the LCD cable connector.
70Chapter 3 5.Remove the two (2) screws from the left and right hinges of the LCD module. 6.Lift away the LCD module and lay it down. NOTE: Lay the LCD down on a clear smooth surface to prevent damage. 7.Pull the antenna cables free of the chassis, threading the antenna cables through from the bottom side.. 8.Remove the LCD module completely. StepScrewQuantityScrew Type. LCD Disassembly 2*5 2