Acer Ferrari One Service Guide

Chapter 3121
Replacing the HDD Module
1.Attach the rails and replace the four (4) screws in the HDD rails.
2.Connect the HDD cable to the HDD.
StepScrewQuantityScrew Type.
HDD Assembly 3.0*3.5 (silver) 4 

122Chapter 3
3.Connect the HDD cable to the main board.
4.Lift up the black tab and place the HDD into the bay.
Replacing the Lower Covers
1.Replace the memory cover aligning the front tabs first. 

Chapter 3123
2.Tighten the three (3) captive screws.
3.Replace the HDD cover, aligning the outside edge tabs first.
4.Tighten the two (2) captive screws. 

124Chapter 3
Replacing the SIM Card
1.Insert the SIM card until it clicks into place.
Replacing the Battery
1.Insert the battery.
2.Slide the battery lock switch into the closed position. 

Chapter 3125
Replacing the Dummy Card
1.Insert the dummy card until it clicks into place. 

126Chapter 3 

Chapter 4127
Troubleshooting
Common Problems
Use the following procedure as a guide for computer problems.
NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or 
modified options can give false errors and invalid system responses.
1.Obtain the failing symptoms in as much detail as possible.
2.Verify the symptoms by attempting to re-create the failure by running the diagnostic test or by repeating 
the same operation.
3.Use the following table with the...

128Chapter 4
Power On Issue
If the system doesn’t power on, perform the following actions one at a time to correct the problem. Do not 
replace non-defective FRUs:
Computer Shuts down Intermittently
If the system powers off at intervals, perform the following actions one at a time to correct the problem.
1.Check the power cable is properly connected to the computer and the electrical outlet. 
2.Remove any extension cables between the computer and the outlet.
3.Remove any surge protectors between the...

Chapter 4129
No Display Issue
If the Display doesn’t work, perform the following actions one at a time to correct the problem. Do not replace 
non-defective FRUs:
No POST or Video
If the POST or video doesn’t display, perform the following actions one at a time to correct the problem.
1.Make sure that the internal display is selected. On this notebook model, switching between the internal 
display and the external display is done by pressing Fn+F5. Reference Product pages for specific model 
procedures....

130Chapter 4
5.Disconnect power and all external devices including port replicators or docking stations. Remove any 
memory cards and CD/DVD discs. Restart the computer.
If the computer boots correctly, add the devices one by one until the failure point is discovered.
6.Reseat the memory modules.
7.Remove the drives (see “Disassembly Process” on page 34).
8.If the Issue is still not resolved, see “Online Support Information” on page 165.
Abnormal Video Display
If video displays abnormally, perform the...