Acer Ferrari One Service Guide

Chapter 121
Media Card Reader
Camera
ItemSpecification
Chipset RTS5159-GR
Features • Compliant with USB Mass Storage Class Bulk only 
Transport Specification Rev. 1.0
•  Support the following memory card interfaces:
• SD/MMC/Mini-SD/Micro-SD(T-flash)/RS-MMC/
Mobile- MMC/MMC-micro
• Memory Stick / Memory Stick PRO / MS Duo / MS-
PRO Duo and Micro-MS(M2)
• MSPRO-HG Duo 8-bit mode
• xD – Picture Card (xD) including Type M and Type H
•  Support hardware ECC(Error Correction Code) function
•  Support hardware...

22Chapter 1
Wireless LAN
3G Module
 Battery
ItemSpecificationSpecificationSpecificationSpecification
Model • Foxconn Wireless LAN Atheros HB95 1x1 BG (HM)
• Foxconn Wireless LAN Atheros HB93
Protocol 802.11a/b/g
Interface PCI-Express
ItemSpecification
3G Model Foxconn Gobi2000
Technical Standard • CDMA2000 1X
•  CDMA2000 1xEV-DO(Release0 and Rev. A)
•  WCDMA(UMTS)
•  High-Speed Downlink Packet Access (HSDPA)
•  High-Speed Uplink Packet Access (HSUPA)
•  Receive Diversity in CDMA2000 1X, CDMA2000 1xEV-DO...

Chapter 223
System Utilities
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if 
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 
Troubleshooting when problem arises.
To activate the BIOS Utility, press F2 during POST (when Press  to enter Setup message is...

24Chapter 2
Information
The Information screen displays a summary of your computer hardware information.
NOTE: The system information is subject to different models.
ParameterDescription
CPU Type This field shows the CPU type and speed of the system.
CPU Speed This field shows the speed of the CPU.
HDD Model Name This field shows the model name of HDD installed on primary IDE master.
HDD Serial Number This field displays the serial number of HDD installed on primary IDE master.
ATAPI Model Name This...

Chapter 225
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option 
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested 
parameter settings.
ParameterDescriptionFormat/Option
System Time Sets the system time. The hours are displayed with 24-
hour format.Format: HH:MM:SS 
(hour:minute:second) 
System Date...

26Chapter 2
Security
The Security screen contains parameters that help safeguard and protect your computer from unauthorized 
use.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested 
parameter settings.
NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don’t forget 
your password. If you forget your password, you may have to return your notebook computer to your 
dealer to reset it....

Chapter 227
Setting a Password
Follow these steps as you set the user or the supervisor password:
1.Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The 
Set Supervisor Password box appears:
2.Type a password in the “Enter New Password” field. The password length can not exceeds 8 
alphanumeric characters (A-Z, a-z, 0-9, not case sensitive). Retype the password in the “Confirm New 
Password” field.
IMPORTANT:Be very careful when typing your password because...

28Chapter 2
Changing a Password
1.Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The 
Set Password box appears.
2.Type the current password in the Enter Current Password field and press Enter.
3.Type a password in the Enter New Password field. Retype the password in the Confirm New Password 
field.
4.Press Enter. After setting the password, the computer sets the User Password parameter to “Set”.
5.If desired, you can enable the Password on boot...

Chapter 229
Boot
This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices 
includes various USB diskette drives and the onboard hard disk drive.
Item Specific Help
F1
ESCHelp
ExitSelect Item
Select Menu
Change Values
Select SubMenu
EnterF9
F10Setup Default
Save and Exit
Boot priority order:
1: IDE0 : WDC WD2500BEVT-22ZCT0 Boot priority order:1. IDE0 : WDC WD2500BEVT-22ZCT0
2: CD/DVD:
3: PCI LAN: Atheros Boot Agent 
4: USB HDD:
5: USB FDD:
  USB KEY:...

30Chapter 2
Exit
The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility.
The table below describes the parameters in this screen.
ParameterDescription
Exit Saving Changes Exit System Setup and save your changes to CMOS.
Exit Discarding 
ChangesExit utility without saving setup data to CMOS.
Load Setup Default Load default values for all SETUP item.
Discard Changes Load previous values from CMOS for all SETUP items.
Save Changes Save Setup Data to CMOS.
Item Specific...