Zanussi Zrg 316 Cw User Manual

Considerazioni ambientali
Il simbolo    sul prodotto o sulla confezione indica che
il prodotto non deve essere considerato come un normale
rifiuto domestico, ma deve essere portato nel punto di
raccolta appropriato per il riciclaggio di apparecchiature
elettriche ed elettroniche. Provvedendo a smaltire questo
prodotto in modo appropriato, si contribuisce a evitare
potenziali conseguenze negative, che potrebbero derivare
da uno smaltimento inadeguato del prodotto. Per
informazioni più dettagliate sul...

Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  32
Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  33
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _   34
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  34
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _  34Care and Cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  35
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  36
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  37
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  38...

or damaged power plug may overheat and cause
a fire.
3. Make sure that you can come to the mains plug of
the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not insert the
power plug. There is a risk of electric shock or fire.
6. You must not operate the appliance without the
lamp cover
7) of interior lighting.
• This appliance is heavy. Care should be taken when
moving it.
• Do not remove nor touch items from the freezer com-
partment if your hands are damp/wet, as...

Switching off
To turn off the appliance, turn the Temperature regulator
to the O position.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• turn the Temperature regulator toward lower settings
to obtain the minimum coldness.
• turn the Temperature regulator toward higher settings
to obtain the maximum coldness.
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping in
mind that the temperature...

• The thermic dilatation might cause a sudden cracking
noise. It is natural, not dangerous physical phenom-
enon. This is correct.
• When the compressor switches on or switches off, you
will hear a faint click of the temperature regulator.
This is correct.
Hints for energy saving
• Do not open the door frequently or leave it open longer
than absolutely necessary.
• If the ambient temperature is high and the Temperature
Regulator is set to low temperature and the appliance
is fully loaded, the compressor...

Periods of non-operation
When the appliance is not in use for long periods, take
the following precautions:
1. disconnect the appliance from electricity supply
2. remove all food
3. defrost and clean the appliance and all accessories
4. leave the door/doors open to prevent unpleasant
smells.
Important!  If the cabinet will be kept on, ask somebody
to check it once in a while to prevent the food inside from
spoiling in case of a power failure.
What to do if…
Warning!  Before troubleshooting, disconnect...

ProblemPossible causeSolution
 Products prevent that water flows into
the water collector.Make sure that products do not touch
the rear plate.
Water flows on the ground.The melting water outlet does not flow
in the evaporative tray above the com-
pressor.Attach the melting water outlet to the
evaporative tray.
The temperature in the appliance
is too low.The temperature regulator is not set
correctly.Set a higher temperature.
The temperature in the appliance
is too high.The temperature regulator is not...

The technical information are situated in the rating plate
on the internal left side of the appliance and in the energy
label.
Installation
Caution!  Read the Safety Information carefully for
your safety and correct operation of the appliance
before installing the appliance.
Positioning
Install this appliance at a location where the ambient tem-
perature corresponds to the climate class indicated on the
rating plate of the appliance:
Climate
classAmbient temperature
SN+10°C to + 32°C
N+16°C to + 32°C...

1. Remove the plug from
the power socket.
2. Tilt back the appliance
carefully so that the com-
pressor cannot touch the
floor.
3. Unscrew both adjustable
feet.
4. Unscrew the screws of
the door bottom hinge. Re-
move the hinge. Put over
the pin in the direction of
the arrow.
5. Unscrew and install the
screw on the opposite side.
6. Install the hinge on the
opposite side.
7. Screw both adjustable
feet.8. Unscrew both screws on
the rear side.
9. Push back the top and lift
it from the fixing elements.10....

Environmental concerns
The symbol    on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potentialnegative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed...