Yamaha 01v 96 I Manual

							MIDI Data Format181
01V96i—Reference Manual
Appendix: MIDI2.8.3.1.5 Parameter Address
Consult your dealer for parameter address details.
2.8.3.2 Parameter change (Edit buffer)
2.8.3.3 Parameter request (Edit buffer)
2.8.3.4 Parameter change (Patch data)
2.8.3.5 Parameter request (Patch data)
2.8.3.6 Parameter change (Setup memory)2.8.3.7 Parameter request (Setup memory)
2.8.3.8 Parameter change (Backup memory)
2.8.3.9 Parameter request (Backup memory)
2.8.3.10 Parameter change (Function call: Library store / 
recall)
Reception
When this is received, the specified memory/library will be stored/recalled. If 
this is received from Studio Manager or Cascade Link, the operation will be ex-
ecuted, and then the result of execution will be transmitted as a Parameter Re-
sponse.
Transmission
If [Parameter change Tx] is ON, and you store or recall a memory/library for 
which Program Change transmission is not valid, this message will be transmit-
ted with the Device Number set to the [Tx CH]. STATUS 11110000 F0
System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00000001 01Edit Buffer
0eeeeeee eeElement no.
(If ‘ee’ is 0, ‘ee’ is expanded to two bytes)
0ppppppp ppParameter no.
0ccccccc ccChannel no.
DATA 0ddddddd dddata
::
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0011nnnn 3nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00000001 01Edit Buffer
0eeeeeee eeElement no.
(If ‘ee’ is 0, ‘ee’ is expanded to two bytes)
0ppppppp ppParameter no.
0ccccccc ccChannel no.
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00000010 02Patch data
0eeeeeee eeElement no.
(If ‘ee’ is 0, ‘ee’ is expanded to two bytes)
0ppppppp ppParameter no.
0ccccccc ccChannel no.
DATA 0ddddddd dddata
::
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0011nnnn 3nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00000010 02Patch data
0eeeeeee eeElement no.
(If ‘ee’ is 0, ‘ee’ is expanded to two bytes)
0ppppppp ppParameter no.
0ccccccc ccChannel no.
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00000011 03Setup data
0eeeeeee eeElement no.
(If ‘ee’ is 0, ‘ee’ is expanded to two bytes)
0ppppppp ppParameter no.
0ccccccc ccChannel no.
DATA 0ddddddd dddata
::
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0011nnnn 3nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00000011 03Setup data
0eeeeeee eeElement no.
(If ‘ee’ is 0, ‘ee’ is expanded to two bytes)
0ppppppp ppParameter no.
0ccccccc ccChannel no.
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00000100 04Backup data
0eeeeeee eeElement no.
(If ‘ee’ is 0, ‘ee’ is expanded to two bytes)
0ppppppp ppParameter no.
0ccccccc ccChannel no.
DATA 0ddddddd dddata
::
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0011nnnn 3nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00000100 04Backup data
0eeeeeee eeElement no.
(If ‘ee’ is 0, ‘ee’ is expanded to two bytes)
0ppppppp ppParameter no.
0ccccccc ccChannel no.
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00010000 10Function call
00ffffff fffunction
0mmmmmmm mhnumber High
0mmmmmmm mlnumber Low
DATA 0ccccccc chchannel High
0ccccccc clchannel Low
EOX 11110111 F7End of exclusive 
						

							182Appendix: MIDI
01V96i—Reference Manual
*1) 0:CH1 – 31:CH32, 32:ST-IN1L - 39:ST-IN4R, 128:BUS1 – 135:BUS8, 
256:AUX1 – 263:AUX8, 512:STEREO
Use 256 if the recall destination or store source is a single data item.
Effect is 0:Effect 1–3:Effect 4
If the store destination is 16383 (0x3FFF), this indicates that the li-
brary data has been changed by a external cause (such as bulk re-
ception)
(only transmitted by the 01V96i)
*2) Varies with the firmware version.
2.8.3.11 Parameter change (Function call: title)
Reception
When this is received, the title of the specified memory/library will be changed. 
If this is received from Studio Manager or Cascade Link, the operation will be 
executed, and then the result of execution will be transmitted as a parameter re-
sponse.
Transmission
In response to a request, this is transmitted with the device number set to the 
[Tx CH].
When the title is changed on the 01V96i, this message will be transmitted with 
the device number set to [Tx CH].
*1) Varies with the firmware version.
2.8.3.12 Parameter request (Function call: title)
Reception
When this is received, a parameter change will be transmitted with the device 
number set to [Rx CH].
Refer to the above table for the Functions and Numbers.
2.8.3.13 Parameter change (Function call: Scene/Library 
Clear)
Reception
When this is received, the specified memory/library will be cleared. If this is re-
ceived from Studio Manager or Cascade Link, the operation will be executed, 
and then the result of execution will be transmitted as a parameter response.
Transmission
When a memory or library is cleared on the 01V96i, this message will be trans-
mitted with the device number set to [Tx CH].
*1) Varies with the firmware version.
2.8.3.14 Parameter change (Function call: attribute)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, the attribute of the specified memory/library will be 
changed.
Transmission
In response to a request, a Parameter Change message will be transmitted on the 
[Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted without 
change.
2.8.3.15 Parameter request (Function call: attribute)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on the 
[Rx CH].
function number channel*1) tx/rx
SCENE RECALL 0x00 0-99, 8192 256 tx/rx
EQ LIB RECALL 0x01 1-200, 8192 0-513 tx/rx
GATE LIB RECALL 0x02 1-128, 8192 0-95 tx/rx
COMP LIB RECALL 0x03 1-128, 8192 0-513 tx/rx
EFF LIB RECALL 0x04 1-128, 8192 0-3 tx/rx
CHANNEL LIB RECALL 0x06 0-128, 8192 0-513 tx/rx
INPATCH LIB RECALL 0x07 0-32, 8192 256 tx/rx
OUTPATCH LIB RECALL 0x08 0-32, 8192 256 tx/rx
SCENE STORE 0x20 1-99 256, 16383 tx/rx
EQ LIB STORE 0x21 41-200 0-513, 16383 tx/rx
GATE LIB STORE 0x22 5-128 0-31, 16383 tx/rx
COMP LIB STORE 0x23 37-128 0-513, 16383 tx/rx
EFF LIB STORE 0x24 xx(*2)-128 0-3, 16383 tx/rx
CHANNEL LIB STORE 0x26 1-128 0-513, 16383 tx/rx
INPATCH LIB STORE 0x27 1-32 256, 16383 tx/rx
OUTPATCH LIB STORE 0x28 1-32 256, 16383 tx/rx
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00010000 10Function call
0100ffff 4ftitle
0mmmmmmm mhnumber High
0mmmmmmm mlnumber Low
DATA 0ddddddd ddtitle 1
:::
0ddddddd ddtitle x(depend on the library)
EOX 11110111 F7End of exclusive
function number size
SCENE LIB TITLE 0x40 0-99,256(0:response only) 16
EQ LIB TITLE 0x41 1-200(1-40:response only) 16
GATE LIB TITLE 0x42 1-128(1-4:response only) 16
COMP LIB TITLE 0x43 1-128(1-36:response only) 16
EFF LIB TITLE 0x44 1-128(1-xx(*1):response only) 16
CHANNEL LIB TITLE 0x46 0-128(0:response only) 16
INPATCH LIB TITLE 0x47 0-32(0:response only) 16
OUTPATCH LIB TITLE 0x48 0-32(0:response only) 16
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0011nnnn 3nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00010000 10Function call
0100ffff 4ftitle
0mmmmmmm mhnumber High
0mmmmmmm mlnumber Low
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00010000 10Function call
0110ffff 6fclear function
0mmmmmmm mhnumber High
0mmmmmmm mlnumber Low
EOX 11110111 F7End of exclusive
function number
SCENE LIB CLEAR 0x60 1-99
EQ LIB CLEAR 0x61 41-200
GATE LIB CLEAR 0x62 5-128
COMP LIB CLEAR 0x63 37-128
EFF LIB CLEAR 0x64 xx-128 (*1)
CHANNEL LIB CLEAR 0x66 1-128
INPATCH LIB CLEAR 0x67 1-32
OUTPATCH LIB CLEAR 0x68 1-32
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00010100 14Function call
0000ffff 0fattribute
0mmmmmmm mhnumber High
0mmmmmmm mlnumber Low
DATA 0ttttttt ttattribute(protect:0x0001, normal:0x0000)
0ttttttt tt
EOX 11110111 F7End of exclusive
function number
SCENE LIB ATTRIBUTE 0x00 0-99(0:response only) 
						

							MIDI Data Format183
01V96i—Reference Manual
Appendix: MIDIRefer to the above table for the Functions and Numbers.
2.8.3.16 Parameter change (Function call: link)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, the patch link data of the specified scene will be modified.
Transmission
In response to a request, a Parameter Change message will be transmitted on the 
[Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted without 
change.
2.8.3.17 Parameter request (Function call: link)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on the 
[Rx CH].
Refer to the above table for the Functions and Numbers.
2.8.3.18 Parameter change (Function call: pair, copy)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, pairing will be enabled/disabled for the specified channel. *1) 0:CH1 – 31:CH32, 128:BUS1 – 135:BUS8, 256:AUX1 – 263:AUX8, 
512:STEREO
Effect is 0:Effect 1–3:Effect 4
 In the case of PAIR, you must specify channels for which pairing is pos-
sible.
 In the case of PAIR ON with COPY, you must specify Source Channel 
as the copy source, and Destination Channel as the copy destination.
2.8.3.19 Parameter change (Function call Event: Effect )
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the corresponding effect’s function activates (depending 
on the effect type).
This does not activate when the effect type is different.
2.8.3.20 Parameter change (Sort Table)
When scene memory sort is executed on the 01V96i, the memory sort table will 
be transmitted to Studio Manager.
Studio Manager will sort the memories according to this data.
If Studio Manager performs a scene memory sort, it will transmit this data to 
the 01V96i.
8-7 conversion is performed on the data area in the same way as for bulk. STATUS 11110000 F0
System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0011nnnn 3nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00010100 14Function call
0000ffff 0fattribute
0mmmmmmm mhnumber High
0mmmmmmm mlnumber Low
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00010100 14Function call
0010ffff 2flink
0mmmmmmm mhnumber High
0mmmmmmm mlnumber Low
DATA 0iiiiiii ihinpatch
0iiiiiii il
0ooooooo ohoutpatch
0ooooooo ol
EOX 11110111 F7End of exclusive
function number
SCENE LIB LINK 0x20 0-99(0:response only)
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0011nnnn 3nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00010100 14Function call
0010ffff 2flink
0mmmmmmm mhnumber High
0mmmmmmm mlnumber Low
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00010001 11Function call Pair
0000ffff 0ffunction
0sssssss shSource channel H
0sssssss slSource channel L
DATA 0ddddddd dhDestination channel H
0ddddddd dlDestination channel L
EOX 11110111 F7End of exclusive
function channel
PAIR ON with COPY 0x00 *1)
PAIR ON with RESET BOTH 0x01 *1)
PA I R  O F F 0 x 0 2 * 1 )
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 01111111 7FUniversal
ADDRESS 00010010 12Function call Effect Event
0000ffff 0ffunction
00000000 00
0ppppppp ppRelease:0, Press:1
DATA 00000000 00
0eeeeeee eeEffect number (0:Effect1 - 3:Effect4)
EOX 11110111 F7End of exclusive
function channel
Freeze Play button 0x00 0:Effect1-3:Effect4
Freeze Record button 0x01 0:Effect1-3:Effect4
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00010011 13Library sort table
0000ffff 0fLibrary type
DATA 0ddddddd dsData
::
0ddddddd deData
EOX 11110111 F7End of exclusive 
						

							184Appendix: MIDI
01V96i—Reference Manual
2.8.3.21 Parameter request (Sort Table)
When the 01V96i receives this data, it will transmit Sort Table Data.
2.8.3.22 Parameter change (Key remote)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the same processing that is executed when the key spec-
ified by Address is pressed (released).
Transmission
If [Parameter Change ECHO] is ON, this message is retransmitted without 
change.
2.8.3.23 Parameter change (Remote Meter)
When transmission is enabled by receiving a Request of Remote meter, the 
specified meter information is transmitted every 50 msec for 10 seconds. When 
you want to transmit meter information continuously, a Request must be trans-
mitted continuously within every 10 seconds.
Reception
This is echoed if [Parameter change ECHO] is ON.
Transmission
When transmission has been enabled by a Request, the parameter specified by 
Address will be transmitted on the [Rx CH] channel at 50 msec intervals for a 
duration of 10 seconds.
Transmission will be disabled if the power is turned off and on again, or if the 
PORT setting is changed.
If [Parameter Change ECHO] is ON, this message is retransmitted without 
change.
* Meter data uses the unmodified DECAY value of the DSP. The inter-
pretation of the data will depend on the parameter.
2.8.3.24 Parameter request (Remote Meter)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, data of the specified address is transmitted on the [Rx CH] at intervals of 50 msec as a rule (although this may not be the case if the 
port is being used by other communication), for a period of 10 seconds.
If Address UL= 0x7F is received, transmission of all meter data will be halted 
immediately. (disable)
Transmission
If [Parameter Change ECHO] is ON, this message is retransmitted without 
change.
2.8.3.25 Parameter change (Remote Time Counter)
When transmission is enabled by receiving a Request of Remote Time Counter, 
the Time Counter data is transmitted every 50 msec for 10 seconds. When you 
want to transmit Counter information continuously, a Request must be trans-
mitted within every 10 seconds.
Reception
This is echoed if [Parameter change ECHO] is ON.
Transmission
When transmission is enabled by receiving a Request, the Time Counter infor-
mation is transmitted on [RxCH] channel every 50 msec for 10 seconds.
Transmission will be disabled if the power is turned off and on again, or if the 
PORT setting is changed.
If [Parameter Change ECHO] is ON, this message is retransmitted without 
change.
2.8.3.26 Parameter request (Remote Time Counter)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, the Time Counter information is transmitted on the [Rx 
CH] channel every 50 msec for 10 seconds.
When the second byte of Address is received on 0x7F, data transmission will be 
halted immediately. (disable)
Transmission
If [Parameter Change ECHO] is ON, this message is retransmitted without 
change. STATUS 11110000 F0
System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0011nnnn 3nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00010011 13Library sort table
0000ffff 0fLibrary type
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00100000 20Key remote
0kkkkkkk kkKey address H
0kkkkkkk kkKey address M
0kkkkkkk kkKey address L
DATA 0ppppppp ppRelease:0, Press:1
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00100001 21Remote meter
0mmmmmmm mmADDRESS UL
0mmmmmmm mmADDRESS LU
0mmmmmmm mmADDRESS LL
DATA 0ddddddd ddData1 H
0ddddddd ddData1 L
::
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0011nnnn 3nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00100001 21Remote meter
0mmmmmmm mmADDRESS UL
0mmmmmmm mmADDRESS LU
0mmmmmmm mmADDRESS LL
0ccccccc chCount H
0ccccccc clCount L
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00100010 22Remote Time counter
0000tttt 0t0:Time code, 1:Measure.Beat.Clock
0ddddddd ddHour   / Measure H
0ddddddd ddMinute / Measure L
DATA 0ddddddd ddSecond / Beat
0ddddddd ddFrame  / Clock
EOX 11110111 F7End of exclusive
STATUS 11110000 F0System exclusive message
ID No. 01000011 43Manufacture’s ID number (YAMAHA)
SUB STATUS 0011nnnn 3nn=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3EMODEL ID (digital mixer)
MODEL ID 00011010 1A01V96i
ADDRESS 00100010 22Remote Time counter
0ddddddd dd0:Transmission request, 
0x7F:Transmission stop request
EOX 11110111 F7End of exclusive 
						

							YAMAHA [Digital Mixing Console-Internal Parameters] Date: 26 Aug. 2011
Model: 01V96i
MIDI Implementation ChartVersion: 1.0
Function... Transmitted Recognized Remarks 
Basic 
ChannelDefault
Changed1–16
1–161–16
1–16Memorized
ModeDefault
Messages
AlteredX
X
**************OMNI off/OMNI on
X
XMemorized
Note 
NumberTrue VoiceX
**************0–127
X
VelocityNote On
Note OffX
XO
OEffect Control
AfterKey’s
Ch’sX
XX
X
Pitch Bend X X
Control
Change0-95,102-119 O O Assignable
Prog
Change :True#0–127
**************0–127
0–99Assignable
System Exclusive O O *1
System
Common:Song Pos
:Song Sel
:TuneX
X
XX
X
X
System
Real Time:Clock
:CommandsX
XO
XEffect Control
Aux
Messages:Local ON/OFF
:All Notes OFF
:Active Sense
:ResetX
X
X
XX
X
O
O
NotesMTC quarter frame message is recognized.
*1: Bulk Dump/Request, Parameter Change/Request, and MMC.
For MIDI Remote, ALL messages can be transmitted.
Mode 1: OMNI ON, POLY
Mode 3: OMNI OFF, POLYMode 2: OMNI ON, MONO
Mode 4: OMNI OFF, MONOO: Yes
X: No 
						

							110IP-A0
Yamaha Manual Library
http://www.yamaha.co.jp/manual/ Yamaha Pro Audio Global Web Site
http://www.yamahaproaudio.com/
© 2011 Yamaha CorporationC.S.G., Pro Audio Division