Yamaha 01v 96 I Manual

Cascading Consoles111
01V96i—Reference Manual
Other Functions
Cascading Consoles
The 01V96i features a Cascade Bus that enables cascade con-
nection. You can connect two 01V96is in cascade using the 
digital inputs and outputs, or the OMNI IN and OMNI OUT 
connectors. In this way, two consoles work just like one big 
console, integrating each unit’s Buses 1–8, Aux Sends 1–8, 
Stereo Bus, and Solo Bus.
The following functions are linked between two cascaded 
01V96is via the MIDI IN and OUT ports.
•...

112Other Functions
01V96i—Reference Manual
Bus signals via the ADAT IN and OUT connectors and 
two 8-channel digital I/O cards (such as MY8-AT).
7.On the master unit, press the DISPLAY 
ACCESS [DIO/SETUP] button repeatedly until 
the DIO/Setup | Cascade page appears, then 
adjust the Attenuators using the parameter 
controls.
The DIO/Setup | Cascade page enables you to adjust the 
level of signals input to the Cascade Bus using the dedi-
cated attenuators. You can also turn the Cascade Buses on 
or off...

Checking the Battery and the System Version113
01V96i—Reference Manual
Other Functions
Checking the Battery and 
the System Version
The Utility | Battery page enables you to check the condition 
of the internal memory-backup battery and the system ver-
sion number. To locate this page, press the DISPLAY ACCESS 
[UTILITY] button repeatedly.
1Status
If the Status is “Okay,” the battery has sufficient voltage for 
operation. If the Status is “Voltage Low!,” ask your 
Yamaha dealer or authorized Yamaha...

114Other Functions
01V96i—Reference Manual
5.When the calibration operation is complete, 
the 01V96i displays a window in which you 
can select faders for position adjustment.
If you selected “2 FADER MOVE ONLY” in Step 3, the 
fader adjustment is complete. The 01V96i starts in nor-
mal mode.
6.Use the channel [SEL] buttons to select faders 
for which you wish to calibrate the position, 
then press [ENTER].
The selected channel [SEL] button indicators flash. 
(When you press [ENTER], they light up...

Index115
01V96i—Reference Manual
Index
Index
Symbols
/INS/DLY | DLY 1-16 page ............ 18
/INS/DLY | DLY 17-32 page
 ......... 18
/INS/DLY | Insert page
 ............ 47, 65
/INS/DLY | Out Dly page
 ........ 30, 37
/INS/DLY | Phase page
 ................... 18
/INSERT/DELAY button
 ................. 8
+48V ON/OFF switches
 ....................... 10
Numerics
1–16/17–32 buttons ................................ 8
1–8 buttons
 ............................................... 9
2TR IN connectors...

116Index
01V96i—Reference Manual
DYNA. FILTER .................................. 136
DYNA. FLANGE
 ................................ 136
DYNA. PHASER
 ................................ 137
Dynamics | Comp Edit page
 .. 20, 30, 37
Dynamics | Comp Lib page
 ................. 79
Dynamics | Gate Edit page
 .................. 19
Dynamics | Gate Lib page
 ................... 79
DYNAMICS button
 ................................8
E
EARLY REF. ........................................ 132
ECHO...

Index117
01V96i—Reference Manual
IndexMIDI remote .......................................... 94
Banks
 ................................................ 94
LATCH
 ............................................ 97
LEARN button
 ............................... 96
MIDI messages
 ............................... 96
TARGET parameter
 ...................... 95
UNLATCH
 ..................................... 97
MIDI Warning preference
 ................ 109
MIDI/USB Section
 ................................ 10
MIX...

118Index
01V96i—Reference Manual
REMOTE button .............................. 8, 83
Remote Layer
Nuendo/Cubase
 ............................. 93
Pro tools
 .......................................... 83
RESET BOTH
 ....................................... 27
REV+CHORUS
 .................................. 137
REV+FLANGE
 ................................... 137
REV+SYMPHO.
 ................................. 138
REV->CHORUS
 ................................. 137
REV->FLANGE
 .....................................

USER DEFINED KEYS119
Appendix: Parameter Lists
01V96i—Reference Manual
Appendix: Parameter Lists
USER DEFINED KEYS
#Function Display
0 No Assign No Assign
1 Scene MEM. Recall +1 Scene  +1 Recall
2 Scene MEM. Recall –1 Scene  –1 Recall
3 Scene MEM. Recall No. XX Scene  XX Recall
4 Effect-1 Lib. Recall +1 Fx1 Lib+1 Recall
5 Effect-1 Lib. Recall –1 Fx1 Lib–1 Recall
6 Effect-1 Lib. Recall No.XX Fx1 LibXXX  RCL.
7 Effect-2 Lib. Recall +1 Fx2 Lib+1 Recall
8 Effect-2 Lib. Recall –1 Fx2 Lib–1 Recall
9 Effect-2...

120Appendix: Parameter Lists
01V96i—Reference Manual
105 Machine Set RTZ Machine Set RTZ
106 Track Arming 1 Track Arming 1
107 Track Arming 2 Track Arming 2
108 Track Arming 3 Track Arming 3
109 Track Arming 4 Track Arming 4
110 Track Arming 5 Track Arming 5
111 Track Arming 6 Track Arming 6
112 Track Arming 7 Track Arming 7
113 Track Arming 8 Track Arming 8
114 Track Arming 9 Track Arming 9
115 Track Arming 10 Track Arming 10
116 Track Arming 11 Track Arming 11
117 Track Arming 12 Track Arming 12
118...