Yamaha 01v 96 I Manual

MIDI Port Setup101
01V96i—Reference Manual
MIDI
MIDI Port Setup
Selecting a Port for MIDI 
Message Transfer
To configure MIDI ports for MIDI message transfer, press the 
DISPLAY ACCESS [DIO/SETUP] button repeatedly until the 
DIO/Setup | MIDI/Host page appears. This page enables you 
to set MIDI message input and output.
The following parameters are available on this page:
1GENERAL section
This section enables you to select ports that transmit and 
receive MIDI messages, such as Program Changes and...

102MIDI
01V96i—Reference Manual
Selecting MIDI Messages for 
Transmission and Reception
You  c an  s e l e c t  M I D I  m e s s ag e s  t o  b e  t r ans m itte d  or  re c e i ve d  at  
a specified port.
To do so, press the DISPLAY ACCESS [MIDI] button, then 
press the [F1] button to display the MIDI | Setup page.
Select MIDI channels for transmission and reception in the 
CHANNEL row, and turn the transmission and reception of 
each MIDI message on or off using the buttons in the param-
eter rows...

Assigning Scenes to Program Changes for Remote Recall103
01V96i—Reference Manual
MIDI
Assigning Scenes to 
Program Changes for 
Remote Recall
You can assign 01V96i Scenes to MIDI Program Changes for 
remote recall. When you recall a Scene on the 01V96i, the 
unit transmits the assigned Program Change to the connected 
MIDI device. When the 01V96i receives a Program Change, 
the assigned Scene is recalled. 
Initially, Scenes 1 through 99 are assigned sequentially to Pro-
gram Changes 1 through 99, and...

104MIDI
01V96i—Reference Manual
Assigning Parameters to 
Control Changes for 
Real-time Control
You can assign 01V96i parameters to MIDI Control Changes 
for real-time control. When the 01V96i receives a Control 
Change, the assigned 01V96i parameter is set accordingly. 
Also, when you adjust a parameter on the 01V96i, the 01V96i 
transmits the assigned Control Change message.
1.Press the DISPLAY ACCESS [DIO/SETUP] but-
ton repeatedly until the DIO/Setup | 
MIDI/Host page appears, then specify ports 
for...

Assigning Parameters to Control Changes for Real-time Control105
01V96i—Reference Manual
MIDI
ONCHANNEL INPUT1–32/ST IN1–4
MASTER BUS1–8/AUX1–8/STEREO
AUX1 SEND
INPUT1–32/ST IN1–4 AUX2 SEND
AUX3 SEND
AUX4 SEND
AUX5 SEND
AUX6 SEND
AUX7 SEND
AUX8 SEND
BUS TO ST BUS1–8
PHASECHANNEL INPUT1–32/ST IN1L–4R
INSERT ONCHANNEL INPUT1–32
MASTER BUS1–8/AUX1–8/STEREO
PRE/POSTAUX1 SEND
INPUT1–32/ST IN1–4 AUX2 SEND
AUX3 SEND
AUX4 SEND
AUX5 SEND
AUX6 SEND
AUX7 SEND
AUX8 SEND
IN DELAYON
INPUT1–32 TIME HIGH
TIME MID
TIME...

106MIDI
01V96i—Reference Manual
Parameters that feature a setting range of more than 128 
steps (such as Fader and Delay Time parameters) require 
two or more Control Change messages to specify the val-
ues.
For example, if you wish to control Fader parameters on 
certain channels using Control Changes, you must assign 
the same channel to two Control Change numbers, and 
select “FADER H” and “FADER L” for the Control 
Changes in the parameter boxes in the first PARAME-
TER column.
If you wish to control...

Transmitting Parameter Settings via MIDI (Bulk Dump)107
01V96i—Reference Manual
MIDI
Transmitting Parameter 
Settings via MIDI (Bulk 
Dump)
You can back up data stored in the 01V96i, such as libraries 
and Scenes, to an external MIDI device by using MIDI Bulk 
Dump. In this way, you can later restore previous 01V96i set-
tings by transmitting this MIDI data back to the 01V96i. 
1.Press the DISPLAY ACCESS [DIO/SETUP] but-
ton repeatedly until the DIO/Setup | 
MIDI/Host page appears, then specify ports...

108MIDI
01V96i—Reference Manual
5.If necessary, move the cursor to the parame-
ter box next to the selected button, then 
rotate the Parameter wheel or press the 
[INC]/[DEC] buttons to select the desired 
bulk dump data.
6.To start transmitting bulk data, move the cur-
sor to the TRANSMIT button, then press 
[ENTER].
Bulk Dump is executed. During the operation, the Bulk 
Dump window appears, indicating the current bulk 
dump status. To abort the bulk dump operation, move the 
cursor to the CANCEL button...

Other Functions109
01V96i—Reference Manual
Other Functions
Other Functions
This chapter describes the 01V96i’s miscellaneous functions.
Setting Preferences
You can change the default settings and environmental set-
tings of the 01V96i by using the DIO/Setup | Prefer1 and 
Prefer2 pages. To locate one of the Preferences page, press the 
DISPLAY ACCESS [DIO/SETUP] button repeatedly.
Prefer1 page
This page enables you to set the 01V96i so that when you 
press a button on the top panel, the 01V96i displays...

110Other Functions
01V96i—Reference Manual
• Routing ST Pair Link
When this check box is checked, paired channels’ routing 
to the Stereo Bus will be linked.
Prefer2 page
The Prefer2 page enables you to name the channel indicated 
on the display, and adjust the display brightness.
This page contains the following parameters:
1Channel ID/Channel
This parameter selects a style for the displayed channel. If 
the Channel ID check box is selected, the Channel ID 
appears (e.g., CH1, CH16, AUX1). If the...