Yamaha 01v 96 I Manual

Pro Tools Remote Layer91
01V96i—Reference Manual
Remote ControlIf the PARAM button is selected instead, move the cursor 
to the button, then press [ENTER] to select INSERT.
5.Move the cursor to the ASSIGN button (2), 
then press [ENTER] to turn on the button.
You can now select plug-ins. If you press another chan-
nel’s [SEL] button after you turn on the ASSIGN button, 
the button turns off. If you wish to assign plug-ins to 
other channels, turn on the ASSIGN button again.
6.Move the cursor to one of...

92Remote Control
01V96i—Reference Manual
6.Move the cursor to a parameter control, then 
rotate the Parameter wheel or press the 
[ENTER] button to adjust the value.
One or two parameters are assigned to a single parameter 
control. To turn the parameter setting on or off, press 
[ENTER]. To modify the parameter variable, rotate the 
Parameter wheel.
7.When you finish adjusting the parameters, 
move the cursor to the INSERT/PARAM but-
ton, then press [ENTER] to switch it to INSERT.
Bypassing Plug-ins
You...

Nuendo/Cubase Remote Layer93
01V96i—Reference Manual
Remote ControlAutomation
If you assign a parameter that controls Pro Tools Automation 
mode (such as DAW Auto Read, DAW Auto Touch, etc.) to 
one of the User Defined buttons, you can control the Automa-
tion settings for each channel by using that User Defined but-
ton. For more information on assigning functions to the user 
defined keys, refer to “Using the User Defined Keys” in the 
Owner’s Manual (separate booklet).
Press the STEREO OUT channel...

94Remote Control
01V96i—Reference Manual
Other DAW Remote Layer
You can remotely control DAW software that supports the 
Pro Tools protocol.
■Configuring Computers
1.
Download the Yamaha Steinberg USB Driver 
from the following URL, and install the driver 
as described in the included installation 
guide.
http://www.yamahaproaudio.com/
2.Launch and set up the DAW software so that 
the 01V96i communicates with the software.
Refer to the DAW software’s user’s manual for more infor-
mation on setting up the...

MIDI Remote Layer95
01V96i—Reference Manual
Remote Control2.Press the DISPLAY ACCESS [DIO/SETUP] but-
ton repeatedly until the DIO/Setup | 
MIDI/Host page appears.
3.Move the cursor to the REMOTE parameter 
box (
1) in the SPECIAL FUNCTIONS section, 
rotate the Parameter wheel to select MIDI, 
then press [ENTER].
If the MIDI port is already in use, a window confirming 
the assignment change appears. Move the cursor to the 
YES button, then press [ENTER].
4.Press the DISPLAY ACCESS [DIO/SETUP] but-
ton...

96Remote Control
01V96i—Reference Manual
Assigning MIDI Messages to 
Channel Controls
You can quickly use the MIDI Remote function if you use the 
factory presets in the banks. However, you can also assign the 
desired MIDI messages to the faders or [ON] buttons.
This section describes how to assign MIDI messages to the 
channel controls, using the example of assigning Hold 
On/Off messages (Control Change #64; Values 127 & 0) to the 
Channel 1 [ON] button.
1.Connect the 01V96i’s MIDI IN port to the...

MIDI Remote Layer97
01V96i—Reference Manual
Remote Control
9.Move the cursor to the LATCH/UNLATCH but-
ton, then press [ENTER] to select LATCH or 
UNLATCH depending on how you want the 
[ON] buttons to function.
•LATCH.................... Pressing the [ON] buttons repeat-
edly transmits alternating On and 
Off messages.
•UNLATCH............. Pressing and holding down the [ON] 
buttons transmits On messages, and 
releasing the [ON] buttons transmits 
Off messages.
■When “SW” is assigned:
•LATCH
•UNLATCH...

98Remote Control
01V96i—Reference Manual
Machine Control Function
The 01V96i can control the transport functions and select 
tracks on external recording machines that support MMC by 
transmitting commands via the MIDI OUT port or USB port.
1.Refer to the diagram below for information 
on connecting the 01V96i to an external 
device.
2.Press the DISPLAY ACCESS [DIO/SETUP] but-
ton repeatedly until the DIO/Setup | 
MIDI/Host page appears.
3.Move the cursor to the PORT parameter box 
in the MACHINE CONTROL...

Machine Control Function99
01V96i—Reference Manual
Remote Control3TRANSPORT section
This section enables you to control the transport func-
tions on external machines.
•REW......................... This button starts rewind on external 
machines.
•FF.............................. This button starts fast forward on 
external machines.
•STOP........................ This button stops external machines.
•PLAY........................ This button starts playback on exter-
nal machines....

100MIDI
01V96i—Reference Manual
MIDI
This chapter describes the 01V96i’s MIDI-related functions.
MIDI & the 01V96i
Using Control Changes, Program Changes, and other MIDI 
messages enables you to recall Scenes and edit parameters on 
the 01V96i, and store 01V96i internal data on external MIDI 
devices.
The 01V96i supports the following MIDI messages. Each of 
these MIDI messages can be individually turned on or off for 
transmission and reception.
• Program Changes
If you assign the 01V96i’s Scenes to...