Xerox WorkCentre Pro 128 User Manual

Properties 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 171Protocol SettingsUnicode Support – Allows you to specify whether to enable 
Unicode support in the host name and workgroup name 
during SMB transmission.
Auto Master Mode – Allows you to enable or disable (on/off) 
Auto Master Mode.
Encrypt Password – Allows you to enable or disable 
password encryption during SMB transmission.
NetWare
Allows you to configure the settings for NDS, transport 
protocol and SLP, as follows....

9 CentreWare Internet Services 
172 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Protocol Settings TCP/IP
Allows you to configure the following TCP/IP settings. 
Host Name – Enter the host name.
Get IP Address – Allows you to set the method for obtaining 
the IP address by selecting the drop down menu to access 
the following options.
• Manual: The user will specify all the addresses.
• DHCP: The address will automatically be set via DHCP.
• BOOTP: The address will automatically be...

Properties 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 173Protocol Settings IP Address List
Allows you to limit the IP address used for receiving print 
data when TCP/IP is enabled.
• IP Filter – Allows you to enable or disable IP filtering.
• No. – Displays the entry number of the IP address list 
from 1 to 10.
• Permitted IP Address – Enter the IP address for receiving 
print data when TCP/IP is enabled.
• IP Mask – Enter an IP address mask for each IP address 
entered in...

9 CentreWare Internet Services 
174 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Protocol Settings Port9100
Allows you to configure the time-out settings for the Port9100.
Port Number – Enter a value for the port number between 
8000 and 9999.
TBCP Filter – Only displayed when PostScript is enabled.
Connection Time-Out – Allows you to specify the connection 
time-out period when transmission fails.
E-mail
Allows you to configure the e-mail and Internet Fax settings as 
follows....

Properties 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 175Protocol SettingsSMTP Authentication User Name – Specify the user ID for 
SMTP authentication.
SMTP Authentication Password – Specify the password for 
SMTP authentication.
Domain Filtering - Receive – Allows you to specify whether 
to restrict incoming e-mail.
Permitted Domain – Enter the domain name to permit 
incoming mails when Domain Filter is enabled.
HTTP
Allows you to configure the HTTP protocol settings as...

9 CentreWare Internet Services 
176 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Emulation Settings PostScript
Allows you to configure the settings when PostScript is 
enabled as follows.
Logical Printer Number – Enter the logical printer number 
and click the [Edit] button.
Paper Tray – Allows you to select the paper tray.
Output Size – Allows you to select the paper size.
Output Destination – Allows you to select the destination for 
your output.
Print Quantity Setup – Allows you...

Properties 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 177Emulation SettingsVariable X% – Allows you to specify the X% between 25 to 
100%.
Up/Down Adjustment – Allows you to specify a value 
between -250 and 250 mm (-9.8–9.8 inches) to adjust the 
vertical position.
Left/Right Adjustment – Allows you to specify a value 
between -250 and 250 mm  (-9.8–9.8 inches) to adjust the 
horizontal position.
Paper Margin – Allows you to specify a value between 0 and 
99 mm for the paper...

9 CentreWare Internet Services 
178 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Memory Settings Memory Settings
Allows you to change the settings for the free space 
available and the print page buffer size for Parallel, USB, 
EtherTalk, SMB, NetWare, LPD, IPP, Port9100, and 
PostScript memory.
Parallel – Enter the print page buffer of the parallel interface 
between 64 KB and 1024 KB in 32 KB increments.
USB – Enter the print page buffer of the USB interface 
between 64 KB and 1024...

Maintenance 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 179
Maintenance
This page displays the Error History. It contains the following details on jobs where an 
error has occurred. Click the [Maintenance] tab on the Main Panel on the home page.
• Date/Time – Displays the date and time when the error occurred. Information is 
displayed in the form of mm/dd/yyyy hh:mm.
• Error Code – Displays the error code. Information is displayed in the form of xxx-yyy.
Support
This page displays...

9 CentreWare Internet Services 
180 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Downloaded From ManualsPrinter.com Manuals