Xerox WorkCentre Pro 128 User Manual
Here you can view all the pages of manual Xerox WorkCentre Pro 128 User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 221
![Page 221
Print Mode Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 221
Allocate Memory
Use this feature to specify memory capacities required for printing and for the receive
buffer for each interface.
1.Select [Allocate Memory] on the
[Print Mode Settings] screen.
2.Use the scroll buttons to switch
between screens.
3.Perform the necessary
operations.
4.Select [Close].
PostScript Memory
Allows you to change the PostScript memory capacity within the range of 8.00–96.00
MB in 0.25...](http://img.usermanuals.tech/thumb/82/38151/w300_Xerox_WorkCentre_Pro_128-220.png "Page 221
Print Mode Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 221
Allocate Memory
Use this feature to specify memory capacities required for printing and for the receive
buffer for each interface.
1.Select [Allocate Memory] on the
[Print Mode Settings] screen.
2.Use the scroll buttons to switch
between screens.
3.Perform the necessary
operations.
4.Select [Close].
PostScript Memory
Allows you to change the PostScript memory capacity within the range of 8.00–96.00
MB in 0.25...")
Print Mode Settings Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 221 Allocate Memory Use this feature to specify memory capacities required for printing and for the receive buffer for each interface. 1.Select [Allocate Memory] on the [Print Mode Settings] screen. 2.Use the scroll buttons to switch between screens. 3.Perform the necessary operations. 4.Select [Close]. PostScript Memory Allows you to change the PostScript memory capacity within the range of 8.00–96.00 MB in 0.25...
Page 222
11 Setups 222 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Hard Disk Specifies the spool location to the hard disk. Receiving Buffer - NetWare Allows you to change the input buffer memory capacity for NetWare interface within the range of 64–1,024 KB in 32 KB increments using the scroll buttons or the numeric keypad. The currently available memory will be displayed at the top of the screen with the following message: “Memory Available: XXX MB.” Receiving Buffer - SMB Spool Allows...
Page 223
Print Mode Settings Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 223 Receiving Buffer - Port9100 Allows you to change the input buffer memory capacity for Port9100 interface within the range of 64–1,024 KB in 32 KB increments using the scroll buttons or the numeric keypad. The currently available memory will be displayed at the top of the screen with the following message: “Memory Available: XXX MB.” Other Settings Use this feature to specify a printable area and replacement...
Page 224
11 Setups 224 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Unregistered Forms Sets whether to abort a job which is specified to use form overlay when the form is not found (not registered) in the machine. Banner Sheet Sets whether to add sorting sheets (banner sheets). This is effective for sorting/ classifying to differentiate printed sheets from the rest. You can add banner sheets before and/or at the end of the print job. NOTE: Even if using the Finisher, banner sheets will not...
Page 225
![Page 225
Scan Mode Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 225
Scan Defaults
Use this feature to configure or change various default settings for the scan features.
1.Select [Scan Defaults] on the
[Scan Mode Settings] screen.
2.Use the scroll buttons to switch
between screens.
3.Perform the necessary
operations.
4.Select [Close].
Original Type
Specify the default for the type of documents to be scanned.
File Format
Specify the default file format for saving scanned data....](http://img.usermanuals.tech/thumb/82/38151/w300_Xerox_WorkCentre_Pro_128-224.png "Page 225
Scan Mode Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 225
Scan Defaults
Use this feature to configure or change various default settings for the scan features.
1.Select [Scan Defaults] on the
[Scan Mode Settings] screen.
2.Use the scroll buttons to switch
between screens.
3.Perform the necessary
operations.
4.Select [Close].
Original Type
Specify the default for the type of documents to be scanned.
File Format
Specify the default file format for saving scanned data....")
Scan Mode Settings Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 225 Scan Defaults Use this feature to configure or change various default settings for the scan features. 1.Select [Scan Defaults] on the [Scan Mode Settings] screen. 2.Use the scroll buttons to switch between screens. 3.Perform the necessary operations. 4.Select [Close]. Original Type Specify the default for the type of documents to be scanned. File Format Specify the default file format for saving scanned data....
Page 226
11 Setups 226 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Border Erase Specify the default for erasing black marks that may appear around the edges or at the center binding area of scanned results when scanning bound documents or documents with the platen glass cover open. Border Erase - Top & Bottom Specify the default for the top and bottom width to be erased. Select the width in the range from 0 to 50 mm (0 to 2.0 inches). Border Erase - Left & Right Specify the default for...
Page 227
![Page 227
Scan Mode Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 227
1.Select [Scan Size Defaults] on
the [Scan Mode Settings]
screen.
2.Use the scroll buttons to switch
between screens.
3.Perform the necessary
operations.
4.Select [Close].
A/B Series Size
Select from paper sizes in A and B series formats.
Inch Size
Select from paper sizes presented in inches.
Others
Select from other various sizes such as postcards and envelopes.
Variable Size
Specify the height and width using...](http://img.usermanuals.tech/thumb/82/38151/w300_Xerox_WorkCentre_Pro_128-226.png "Page 227
Scan Mode Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 227
1.Select [Scan Size Defaults] on
the [Scan Mode Settings]
screen.
2.Use the scroll buttons to switch
between screens.
3.Perform the necessary
operations.
4.Select [Close].
A/B Series Size
Select from paper sizes in A and B series formats.
Inch Size
Select from paper sizes presented in inches.
Others
Select from other various sizes such as postcards and envelopes.
Variable Size
Specify the height and width using...")
Scan Mode Settings Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 227 1.Select [Scan Size Defaults] on the [Scan Mode Settings] screen. 2.Use the scroll buttons to switch between screens. 3.Perform the necessary operations. 4.Select [Close]. A/B Series Size Select from paper sizes in A and B series formats. Inch Size Select from paper sizes presented in inches. Others Select from other various sizes such as postcards and envelopes. Variable Size Specify the height and width using...
Page 228
![Page 228
11 Setups
228 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Reduce/Enlarge Presets
Use this feature to configure or change the reduction/enlargement ratio buttons that
appear when [Preset %] is selected on the [Reduce/Enlarge] screen under the [Scan
Options] tab.
1.Select [Reduce/Enlarge
Presets] on the [Scan Mode
Settings] screen.
2.Use the scroll buttons to switch
between screens.
3.Perform the necessary
operations.
4.Select [Close].
Preset %
Select from preset...](http://img.usermanuals.tech/thumb/82/38151/w300_Xerox_WorkCentre_Pro_128-227.png "Page 228
11 Setups
228 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Reduce/Enlarge Presets
Use this feature to configure or change the reduction/enlargement ratio buttons that
appear when [Preset %] is selected on the [Reduce/Enlarge] screen under the [Scan
Options] tab.
1.Select [Reduce/Enlarge
Presets] on the [Scan Mode
Settings] screen.
2.Use the scroll buttons to switch
between screens.
3.Perform the necessary
operations.
4.Select [Close].
Preset %
Select from preset...")
11 Setups 228 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Reduce/Enlarge Presets Use this feature to configure or change the reduction/enlargement ratio buttons that appear when [Preset %] is selected on the [Reduce/Enlarge] screen under the [Scan Options] tab. 1.Select [Reduce/Enlarge Presets] on the [Scan Mode Settings] screen. 2.Use the scroll buttons to switch between screens. 3.Perform the necessary operations. 4.Select [Close]. Preset % Select from preset...
Page 229
![Page 229
Fax Mode Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 229
Maximum Stored Pages
Specify the maximum number of pages to be stored in memory through scanning.
Select the number in the range from 1 to 999.
TIFF Format
Specify the type of the TIFF format to be used when TIFF is selected for saving
scanned data.
Image Transfer Screen
Specify how the screen should appear when scanning is finished. If you select [Hide
Message and Screen], no message is displayed when scanning is...](http://img.usermanuals.tech/thumb/82/38151/w300_Xerox_WorkCentre_Pro_128-228.png "Page 229
Fax Mode Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 229
Maximum Stored Pages
Specify the maximum number of pages to be stored in memory through scanning.
Select the number in the range from 1 to 999.
TIFF Format
Specify the type of the TIFF format to be used when TIFF is selected for saving
scanned data.
Image Transfer Screen
Specify how the screen should appear when scanning is finished. If you select [Hide
Message and Screen], no message is displayed when scanning is...")
Fax Mode Settings Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 229 Maximum Stored Pages Specify the maximum number of pages to be stored in memory through scanning. Select the number in the range from 1 to 999. TIFF Format Specify the type of the TIFF format to be used when TIFF is selected for saving scanned data. Image Transfer Screen Specify how the screen should appear when scanning is finished. If you select [Hide Message and Screen], no message is displayed when scanning is...
Page 230
![Page 230
11 Setups
230 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
4.Select [Close].
Fax Screen Default
Allows you to choose between [Basic Features] and [Address Book] for the first screen
to be displayed when you select the fax feature.
Address Book Default
Allows you to specify the default key number displayed at the top of the [Address Book]
on the [Basic Features] screen. You can set the key number within the range of 1 to
500 using the scroll buttons or the numeric keypad on the...](http://img.usermanuals.tech/thumb/82/38151/w300_Xerox_WorkCentre_Pro_128-229.png "Page 230
11 Setups
230 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
4.Select [Close].
Fax Screen Default
Allows you to choose between [Basic Features] and [Address Book] for the first screen
to be displayed when you select the fax feature.
Address Book Default
Allows you to specify the default key number displayed at the top of the [Address Book]
on the [Basic Features] screen. You can set the key number within the range of 1 to
500 using the scroll buttons or the numeric keypad on the...")
11 Setups 230 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 4.Select [Close]. Fax Screen Default Allows you to choose between [Basic Features] and [Address Book] for the first screen to be displayed when you select the fax feature. Address Book Default Allows you to specify the default key number displayed at the top of the [Address Book] on the [Basic Features] screen. You can set the key number within the range of 1 to 500 using the scroll buttons or the numeric keypad on the...