Xerox WorkCentre 7345 User Manual

249 Services Folder
This folder contains several subfolders.
The Printing subfolder contains a hot link labeled Print Mode, and another sub-folder labeled Language 
Emulations.
Click on the Print Mode hot link to set the Page Description Language emulation used by the Printers 
Input Ports displayed on the screen.  Depending upon the Ports enabled at the Device, the list of Ports will 
include: Parallel, AppleTalk (with PostScript), SMB, LPD, IPP and Port 9100.  Typical Page Description 
selections for...

250 Services Folder (continued)
The Network Scanning subfolder is used to set up Network Scanning using Templates, as stated in 
this guide in the topic of the same name.
The Machine Software Subfolder currently contains two hot links: Upgrades and Manual Upgrade.
The Upgrades hot link provides the Enabling control for software upgrades.
The Manual Upgrade hot link provides the ability to manually perform software upgrades, after 
enabling through the Upgrades link.
The Xerox Services subfolder contains...

251 Security folder
This file folder now contains the contents found in previous products in the Security folder.
The Authentication Configuration hot link is used for setting up the machine with local and remote 
Authentication, and for the use of Authentication in conjunction with Accounting methods.  The folder also 
contains a hot link for Audit Log settings, as well as a link for setting up the details of the log in used by 
users to access device services.
User Details Setup is used to configure...

252
Support Tab 
The Support tab provides a Software Upgrade hot link, and displays System Administrator and Xerox 
Support information.  By clicking on Change Settings, the displayed information can be modified as 
desired. 
Downloaded From ManualsPrinter.com Manuals 

253
Additional Details of some Properties Tab features
Setting TIFF (and other PDL) Processing Properties
To set the Printers default TIFF / JPEG, PostScript, PCL, or HP-GL/2 processing properties, perform the 
following steps:
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  
Press Enter.
2. Click the Properties tab.
3. Click the folder in the directory tree labeled Services.
4. Click the folder labeled Printing, then on the folder labeled Language...

254
Setting PDL Emulations 
To set the PDL (Page Description Language) Emulations, used by the Devices Input Ports, perform the 
following steps:
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  
Press Enter.
2. Click the Properties tab.
3. Click the folder in the directory tree labeled Services.
4. Click the folder labeled Printing.
5. Click on the folder labeled Language Emulations to see the Page Description Languages currently 
supported by system...

255
Banner Sheet Printing
When documents are sent to print at the machine, a banner sheet is printed identifying the PC that sent the 
print job. The banner sheet is printed on paper from a selected tray. When the selected tray is empty, the 
device will automatically switch to another tray with the same size paper and print the banner sheet from 
that tray. The device will continue to print banner sheets from this secondary tray until the selected tray is 
refilled.
To set banner sheet printing and...

256
Set the Ethernet Speed 
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  
Press Enter.
2. Click the Properties tab.
3. Click the Connectivity folder, then the Physical Connections folder.
4. Click the Ethernet hot link.
5. Select your network speed from the drop-down list.
6. Click the Apply button to accept the changes, or the Undo button to return the settings to their 
previous values.
Note: Changes to settings are not applied until you restart...

257
Configure TCP/IP Settings 
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  
Press Enter.
2. Click the Properties tab.
3. Click the plus symbol (+) to the left of Connectivity, then the Protocols file folder.
4. Select TCP/IP in the directory tree.
5. Review the available selections as displayed on your screen and explained in the TCP/IP 
Configuration Selection List, below.
6. Accept the default Host Name, or type in your own unique Host Name for...

258 TCP/IP Configuration Selection List
As displayed on your screen, the following selections are available for TCP/IP Configuration.
IP Mode
Select the IP Mode that applies to your network environment.
General
Host Name.  The default entry assures a name that is unique to this device on the network.
IP Address Resolution.  Use this drop-down menu to select the method to use to assign IP 
Addresses.  Select Static, DHCP, RARP, BOOTP, or DHCP/Autonet.
Note that with the Autonet option selected, if a...