Xerox WorkCentre 4112 User Manual

							Using CentreWare Internet Services
Xerox 4112/4127 Copier/Printer 3-7
System Administration Guide
13. Reflect the values as the machine's setting values.
a. Click the Apply button. A screen to enter the user name and password will be displayed.
b. Enter the System Administrator UserID and password into User Name and Password, 
and then click OK.
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
d. Click Reboot. The machine will reboot and the setting value will be reflected.
NetWare
This section describes the settings for NetWare.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a 
computer on page 3-2).
2. Click the Properties tab.
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the 
fo ld er.
4. Click NetWare.
5. Select an operation mode from the Active Mode pull-down menu.
Downloaded From ManualsPrinter.com Manuals 
						

							Using CentreWare Internet Services
3-8   System Administration Guide
Xerox 4112/4127 Copier/Printer
6. Set the Printer Server Name.
7. Set the Fileserver Name.
Note
Set this item only when the operation mode is in Bindery Service.
8. Set the Poling Interval.
9. Set the Number of Searches.
10. Set the Password.
a. Enter the Password.
b. Re-enter the same password in the Re-enter Password field.
11. Select the Enable check box to enable the TBCP Filter.
Note
The TBCP Filter checkbox will have a checkmark in it indicating that the TBCP Filter is 
enabled.
12. Set the NDS Tree Name.
13. Set the NDS Context Name.
Note
Set this item only when the operation mode is in Directory Service.
14. Select a frame type from the Transport Protocol - Frame Type pull-down menu.
Note
Set this item only when the operation mode is in Directory Service.
15. Select the Enable check box to enable SLP - Active Discovery.
16. Reflect the values as the machine's setting values.
a. Click the Apply New Settings. A screen to enter the user name and password will be 
displayed.
b. Enter the System Administrator UserID and password into User Name and Password, 
and then click OK.
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
d. Click Reboot. The machine will reboot and the setting value will be reflected.
Downloaded From ManualsPrinter.com Manuals 
						

							Using CentreWare Internet Services
Xerox 4112/4127 Copier/Printer 3-9
System Administration Guide
TC P / I P
This section describes the settings for TCP/IP.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a 
computer on page 3-2).
2. Click the Properties tab.
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the 
fo ld er.
4. Click TC P / I P.
5. Set the Host Name.
6. Select how to obtain an IP address from the Get IP Address pull-down menu.
7. Set the IP Address.
Note
This item is not necessary if either DHCP, BOOTP, RARP, or DHCP/Autonet has been 
selected from the Get IP Address pull-down menu.
8. Set the Subnet Mask and Gateway Address.
Downloaded From ManualsPrinter.com Manuals 
						

							Using CentreWare Internet Services
3-10   System Administration Guide
Xerox 4112/4127 Copier/Printer
Note
This item is not necessary if either DHCP, BOOTP, RARP, or DHCP/Autonet has been 
selected from the Get IP Address pull-down menu.
9. Set the DNS information.
a. Select the check box if using DHCP for Obtain DNS Server Address Automatically.
b. Set the DNS Address 1 to 3.
Note
This item is not necessary if DHCP has been specified for the Get the DNS Server Address.
c. Set the DNS Name.
d. Select the Enable check box when using the Generate Domain Search List 
Automatically.
e. Set the Domain Name 1 to 3.
f. Set the Connection Timeout.
g. Select the Enable check box to enable the DNS Dynamic Update.
10. Reflect the values as the machine's setting values.
a. Click the Apply button. A screen to enter the user name and password will be displayed.
b. Enter the System Administrator UserID and password into User Name and Password, 
and then click OK.
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
d. Click Reboot. The machine will reboot and the setting value will be reflected.
LPD
This section describes the settings available for the LPD feature.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a 
computer on page 3-2).
2. Click the Properties tab.
Downloaded From ManualsPrinter.com Manuals 
						

							Using CentreWare Internet Services
Xerox 4112/4127 Copier/Printer 3-11
System Administration Guide
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the 
fo ld er.
4. Click LPD.
5. Set the Port Number.
6. Select the Enable check box to enable the TBCP Filter.
7. Set the Connection Time-Out.
8. Set the Maximum Number of Sessions.
9. Reflect the values as the machine’s setting values.
a. Click the Apply button. A screen to enter the user name and password will be displayed.
b. Enter the System Administrator UserID and password into User Name and Password, 
and then click OK.
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
d. Click Reboot. The machine will reboot and the setting value will be reflected.
SNMP
This section describes the settings for SNMP.
Note
When using the CentreWare software to manage the machine by remote control, enable the 
SNMP port.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a 
computer on page 3-2).
Downloaded From ManualsPrinter.com Manuals 
						

							Using CentreWare Internet Services
3-12   System Administration Guide
Xerox 4112/4127 Copier/Printer
2. Click the Properties tab.
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the 
fo ld er.
4. Click SNMP Configuration.
Note
Another option exists called Enable SNMP v3 Properties. If using this option, configure 
HTTPS before configuring SNMP v3. Configuring this feature requires secure web page 
comminications.
5. Select Edit SNMP (v1/v2c or v2) Properties.
a. A screen to enter the user name and password will be displayed.
b. Enter the System Administrator UserID and password into User Name and Password, 
and then click OK.
Downloaded From ManualsPrinter.com Manuals 
						

							Using CentreWare Internet Services
Xerox 4112/4127 Copier/Printer 3-13
System Administration Guide
Note
The default User ID value is 11111 and password is x-admin.
6. When changing the community name, set all the Community Name (Read only), 
Community Name (Read/Write), and Tra p Community Name (Trap Notification).
Note
Normally, do not change the settings.
7. Set the System Administrator's Login ID.
8. Reflect the values as the machine’s setting values.
a. Click the Apply button. A screen to enter the user name and password will be displayed.
b. Enter the System Administrator UserID and password into User Name and Password, 
if necessary, and then click OK.
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
d. Click Reboot. The machine will reboot and the setting value will be reflected.
Downloaded From ManualsPrinter.com Manuals 
						

							Using CentreWare Internet Services
3-14   System Administration Guide
Xerox 4112/4127 Copier/Printer
IPP
This section describes the settings for the IPP port.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a 
computer on page 3-2).
2. Click the Properties tab.
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the 
fo ld er.
4. Click IPP.
5. Set the Add Port Number.
6. Select the Enable check box to enable the TBCP Filter.
7. Select the Enable check box to enable Administration Mode.
8. Select the Enable check box to enable DNS.
9. Set the Connection Time-Out.
10. Reflect the values as the machine's setting values.
a. Click the Apply New Settings. A screen to enter the user name and password will be 
displayed.
b. Enter the System Administrator UserID and password into User Name and Password, 
If necessary, and then click OK.
Downloaded From ManualsPrinter.com Manuals 
						

							Using CentreWare Internet Services
Xerox 4112/4127 Copier/Printer 3-15
System Administration Guide
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
d. Click Reboot.The machine will reboot and the setting value will be reflected.
Port 9100
This section describes the settings for Port 9100 port.
Note
Enable the Port 9100 port when using HP-UX.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a 
computer on page 3-2).
2. Click the Properties tab.
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the 
fo ld er.
4. Click Port 9100.
5. Set the Port Number.
6. Select the Enable check box to enable the TBCP Filter.
Downloaded From ManualsPrinter.com Manuals 
						

							Using CentreWare Internet Services
3-16   System Administration Guide
Xerox 4112/4127 Copier/Printer
7. Set the End of Job Timeout.
8. Reflect the values as the machine’s setting values.
a. Click the Apply New Settings. A screen to enter the user name and password will be 
displayed.
b. Enter the System Administrator UserID and password into User Name and Password, 
and then click OK. 
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
d. Click Reboot. The machine will reboot and the setting value will be reflected.
LDAP
This section describes the settings for the LDAP port.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a 
computer on page 3-2).
2. Click the Properties tab.
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the 
fo ld er.
4. Click + on the left of LADP Folder to display the items in the folder.
Downloaded From ManualsPrinter.com Manuals