Home > Xerox > Printer > Xerox Phaser 7400DX User Manual

Xerox Phaser 7400DX User Manual

Here you can view all the pages of manual Xerox Phaser 7400DX User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 41

Loading Paper
Phaser® 7400 Color Printer 3-12
Short-Edge Feed
Use short-edge feed for  labels, for A6 size paper, and for  paper that is narrower than 142 mm 
(5.6 in.) or longer than 305 mm (12.0 in.).
1. Open Tray 1 (MPT) by pulling out on the hand le, and then unfold the tray extensions.
2.  Load  the paper or other media with  the short edge against the roller,  as shown in the 
following illustrations:
■For  single-sided  printing , place the side to be printed  faceup, with the top of the page...

Page 42

Loading Paper
Phaser® 7400 Color Printer 3-13
■For automatic  two-sided printing , place side one  facedown, with the top of the page 
entering the printer first. Pr epunched holes should be toward s the back of the printer. 
For more information, see  Printing on Both Sides of the Paper  on page 3-29.
Caution: Do not load paper or media past the f ill line indicated on the tray. Overloading 
the tray may cause jams.
3. Adjust the paper guid es to fit the paper.
7400-252
XEROX
7400-0117400-255...

Page 43

Loading Paper
Phaser® 7400 Color Printer 3-14
4.
If you loaded paper or media with a height le ss than 111 mm (4.4 in.), open the left-side 
output tray.
5. When the control panel prompts you to confirm th e type and size of paper in the tray, press 
the  OK button to use the current tray  setup. If you loaded a new size or type of paper in the 
tray, do the following:
a. Select  Change setup , and then press the  OKbutton.
b. Select the appropriate paper type, and then press the  OKbutton. 
c. Select...

Page 44

Loading Paper
Phaser® 7400 Color Printer 3-15
Using Manual Feed in Tray 1 (MPT)
If you are using paper, such as letterhead, and do not want others to use it by mistake, you can 
have the printer prompt you  when it is time to load the paper for your print job. 
Selecting Manual Feed Using Windows
To select this option using Windows:
1.In the Windows printer driver, click the  Paper/Quality tab.
2. Select  Force Printing from a Specific Tray , and then select Tray 1 (MPT) from the list.
3. Select  Manual...

Page 45

Loading Paper
Phaser® 7400 Color Printer 3-16
Loading Paper in Trays 2–6
Use Trays 2–6 for a wide range of paper and media types including:
■Plain paper, colored paper, preprinted pa per, prepunched paper: 64–105 g/m2 (17–28 lb. 
Bond, 22–39 lb. Cover)
■Heavy plain paper, letterhead: 106–128 g/m2 (29–34 lb. Bond, 40–47 lb. Cover)
■Thin card stock: 129–188 g/m2 (35–50 lb. Bond, 48–69 lb. Cover)
■Thick card stock: 189–216 g/m2 (51–57 lb. Bond, 70–80 lb. Cover)
■Transparencies (Tray 2 only)
See also:...

Page 46

Loading Paper
Phaser® 7400 Color Printer 3-17
2.
If necessary, adjust the length and side pa per guides to match the size of the paper.
Note: When the paper guides are adjusted corr ectly, there may be a small space between 
the paper and the guides.
3. Fan the paper to release sheets that are stuck together.
7400-018
7400-019
Downloaded From ManualsPrinter.com Manuals 

Page 47

Loading Paper
Phaser® 7400 Color Printer 3-18
4.
Load the paper with th e long edge towards the right side  of the tray, as shown in the 
following illustrations:
■For  single-sided  printing , insert the side to be printed  facedown with the top of the 
paper at the back of the tray. Prepunched hole s should be on the right side of the tray.
■For automatic 2-sided printing , insert side one  faceup with the top of the paper at the 
back of the tray. Prepunched holes should be  on the left side of the...

Page 48

Loading Paper
Phaser® 7400 Color Printer 3-19
5.
Push the tray completely into the printer.
6. If you changed the type of paper in the tray, do the following:
a.At the control panel, select  Paper Tray Setup, and then press the OKbutton.
b. Select  Tray N Paper , and then press the  OKbutton.
c. Select  Change setup , and then press the  OKbutton. 
d. Select the appropriate paper type, and then press the  OKbutton.
Caution: Setting the appropriate paper type improves  print quality and avoids damage to...

Page 49

Loading Paper
Phaser® 7400 Color Printer 3-20
Short-Edge Feed
Use short-edge feed for paper that is longer  than 328 mm (12.9 in.), and for A6 size paper. 
A6 size paper should be printed single-sided, from Tray 2 only.
To load paper or other media in Trays 2–6:
1. Pull out the tray.
2. If necessary, adjust the length and side pa per guides to match the size of the paper.
Note: When the paper guides are adjusted corr ectly, there may be a small space between 
the paper and the guides.
7400-017
7400-018...

Page 50

Loading Paper
Phaser® 7400 Color Printer 3-21
3.
Fan the paper to release sheets that are stuck together.
4. Load the paper with the short  edge towards the right side of the tray, as shown in the 
following illustrations:
■For  single-sided  printing , insert the side to be printed  facedown with the top of the 
page on the right side of the tray. Prepunch ed holes should be towards the front of the 
tray.
7400-019
7400-021
XEROX
Downloaded From ManualsPrinter.com Manuals 
Start reading Xerox Phaser 7400DX User Manual

Related Manuals for Xerox Phaser 7400DX User Manual

All Xerox manuals