Xerox Phaser 6500DN User Manual

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide91
Information Pages Menu
Your printer comes with a set of information pages to help you track the performance of the printer 
and diagnose problems. Access the information pages from the printer control panel. You can print the 
Menu Map to see where these information pages are located in the control panel menu structure.
See also: 
Information Pages on page 24
Information PageContents
Menu Map Prints a list of all main and second-level menu...

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide 92
Billing Meters
The Billing Meters menu shows the number of processed print jobs. The meters are divided according 
to the color modes. You cannot print the billing meters and you cannot reset them; they track the total 
number of pages printed for the life of the printer.
The print meter, in contrast, can be reset, and you can print the information as the Print Volume report. 
For details, see Checking Page Counts on page 115.
See also:...

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide93
Admin Menu
The Admin Menu contains the following sub menus:
•Network Setup Menu on page 93
•USB Setup Menu on page 94
•System Setup Menu on page 95
•Maintenance Mode Menu on page 97
•PCL Setup Menu on page 98
•PostScript Setup Menu on page 100
•Control Panel Menu on page 101
Use the Admin Menu to access the configuration settings of the printer.
Network Setup Menu
Use this menu to configure printer settings for jobs sent to the printer...

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide 94
USB Setup Menu
Use this menu to configure the USB port.
Protocol When a protocol is set to Enable, it can be used. When set to Disable, it 
cannot be used.
•LPR
• Port 9100
•IPP
•SMB TCP/IP
•SMB NetBEUI
•FTP
•WSD
•SNMP
• Email Alerts
• CenterWare Internet Services
•Bonjour (mDNS)
Host Access List Limits the IP addresses that can access this printer.
Reset Defaults Resets all network settings back to their factory defaults.
Adobe Protocol...

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide95
System Setup Menu
Use this menu to configure the general operation settings of the printer. For example, time to energy 
saver mode, alarm settings, and so on.
ItemDescription
Power Saver Time Specifies the length of time, 5–60 minutes, that the printer is idle before 
going into Energy Saver mode. For details on setting the Power Saver Time, 
see Setting the Power Saver Time on page 23.
Audio Tones Specifies whether an alarm sounds when...

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide 96Auto Log Print Specifies whether to print a Job History Report after 22 print jobs.
• Off (default): Prevents the Job History Report from printing 
automatically even if the number of print jobs exceeds 22.
• On: Automatically prints a report when the number of print jobs reaches 
22.
Note:
•You cannot set Auto Log Prints during printing.
•After changing this setting, turn off the printer and then turn it on 
again to activate the change....

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide97
Maintenance Mode Menu
Use this menu to configure color registration and to reset defaults.
Odd Page 2-Sided
(Phaser 6500DN printer 
configuration only)If the optional duplex unit is installed, this item tells the printer how to 
handle the last odd page in a 2-sided print job.
•1-sided
•2-sided
Power On Wizard Resets the Power On Wizard. The first time the printer is turned on, a special 
menu appears on the printer control panel. Use it to...

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide 98
PCL Setup Menu
Use this menu to configure settings for PCL. The PCL driver is used for applications requiring PCL. For 
PCL print driver options, see Printing Options for Windows PCL Driver on page 63.
Clear Storage Deletes documents stored in the RAM in the printer.
Reset Fuser Resets the fuser life counter to the starting point (0).
ItemDescription
Paper Tray Specifies the paper tray to use when the Paper Tray setting in the PCL print...

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide99 Image Enhance Selects whether to perform image enhancement.
The image enhancement feature makes the boundary line between black 
and white smoother to decrease jags and enhance the visual appearance. 
•On (default)
•Off
Hex Dump Specifies whether to print the data sent from a computer in the ASCII code 
corresponding to the hexadecimal notation format. The Hex Dump allows 
checking of data contents. 
•Enable
• Disable (default)
Draft Mode...

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide 100
PostScript Setup Menu
Use this menu to configure settings for the PostScript driver. The PostScript driver of the printer is used 
for applications requiring PostScript. For PostScript driver options, see Printing Options for Windows 
PostScript Driver on page 62 and Printing Options for Macintosh OS X Version 10.5 or Later on page 65.
ItemDescription
PS Error Report Turns error reporting on or off.
The default is On.
PS Job Time-Out...