Xerox Phaser 6180N User Manual

Control Panel Menus
Phaser® 6180 Color Laser Printer
5-3
Changing Menu Settings
Changing the Power Saver Time
In this example, you set the transitional time to the Power Saver Mode.
1.To display the menu screen, press the Menu button at the print screen.
2.Press the Up Arrow or Down Arrow button until 
Admin Menu is displayed, and then 
press the Forward Arrow or OK button.
3.Press the Up Arrow or Down Arrow button until 
System Setup is displayed, and then 
press the Forward Arrow or OK button.
4.Press...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-4
Description of Menu Items
This section includes:
■Tray Settings on page 5-4
■Information Pages on page 5-6
■Billing Meters on page 5-7
■Admin Menu on page 5-7
Tray Settings
There are three submenus under the Tray Settings menu: Tray 1 (MPT), Tray 2, and Tray 3. 
You can set paper size and paper type for each tray under these menus. (Display Pop-up and 
MPT Mode can only be set for Tray 1 (MPT).)
Tray 3 is displayed only when the optional...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-5
Settings Exclusive to Tray 1 (MPT)
When the size or type of paper that is loaded is different from the setting, the print quality may 
fall or paper may jam. Specify the correct paper type and size.
When installing the optional sheet feeders if Paper Tray is set to Au t o on the print driver, the 
feeding tray is automatically specified according to the setting on the control panel. Also, 
when the paper size and type setting for each tray is...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-6
Information Pages
Prints various types of reports and lists.
■The information pages are printed on A4 size paper. Load A4 size paper into the tray. 
■For the procedure for printing information pages, refer to Printing Information Pages on 
page 5-6.
Printing Information Pages
Information pages are printed from the control panel.
1.Press the Menu button to display the Menu screen.
2.Press the Up Arrow or Down Arrow button until 
Information...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-7
Billing Meters
Displays the number of processed print jobs on the control panel. The meter is divided 
according to the color modes.
See also: 
Checking Page Counts on page 8-9
Admin Menu
This menu contains eight submenus:
■Network Setup
■Parallel Setup
■USB Setup
■System Setup
■Maintenance Mode
■PCL Setup
■PostScript Setup
■Control Panel
Item Description
Color Impressions Displays the total number of pages printed in color.
Black Impressions...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-8
Network Setup
Specifies printer settings affecting jobs sent to the printer through a network port.
■The settings in the Network Setup menu cannot be set when entering this menu during 
printing.
■You need to restart the printer to activate the new settings. After making the settings, turn 
off the printer and then turn it on again.
Item Description
Ethernet Specifies the communication speed and the modes of Ethernet.
■Auto (default)...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-9
Protocol Set Enable when using the protocol. When Disable is selected, the protocol 
cannot be activated.
■LPR (default: Enable)
■Port 9100 (default: Enable)
■IPP (default: Enable)
■SMB TCP/IP
■SMB NetBEUI
■FTP (default: Enable)
■NetWare(default: Enable)
■SNMP (default: Enable)
■Email Alerts (default: Enable)
■CentreWare IS (default: Enable)
■Bonjour (mDNS) (default: Enable)
■HTTP-SSL/TLS (default: Enable)
IPP, NetWare, and HTTP-SSL/TLS are...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-10
Parallel Setup
Specifies the settings for the parallel interface.
Note:You need to restart the printer to activate the new settings. After making the settings, 
turn off the printer and then turn it on again.
System Setup
System Setup menu is used to make the printer operation settings, such as for alarm and power 
saver mode.
Item Description
Bi-directional Specifies the Bi-directional communication mode of the parallel interface.
■Enable...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-11
Auto Log History Specifies whether to automatically print information about the printed data that 
has been processed in the printer (Job History Report).
■Off (default)
Select this if you do not want to print the Job History Report automatically 
even if the number of print jobs exceeds 22.
■On
Automatically prints a report when the number of print jobs reaches 22.
■You cannot set this during printing.
■You can print the Job History Report...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-12
Tray Switching Specifies whether to print on paper loaded in another tray when there is no paper 
left in the tray selected by the auto tray selection feature. This item is displayed 
when the optional sheet feeder is installed.
■Off (default) 
Select this to display a message prompting you to load paper.
■Larger Size 
Select this to replace the paper with a larger size paper before printing in 
100% magnification ratio.
■Nearest Size...