Xerox Phaser 6010N User Manual

							Troubleshooting
Phaser 6000/6010 Color Printer
User Guide61
Adjusting Altitude
Print quality varies with barometric pressure. Since the barometric pressure decreases as the altitude 
increases, the altitude can affect the print quality of the printer. To optimize print quality for your 
location, select the altitude setting on your printer to match the altitude of your location.
To adjust altitude:
1. On your computer, click Start > All Programs > Xerox Office Printing > Phaser 6000/6010 > 
Printer Setting Utility.
2. Click the Printer Maintenance tab, then select Adjust Altitude from the list.
3. Click the arrow for the drop-down list to the right of Adjust Altitude.
4. Select the value closest to the altitude of your location.
5. Click Apply New Settings to change the setting.
6. Close the Printer Setting Utility.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting
Phaser 6000/6010 Color Printer
User Guide 62
Downloaded From ManualsPrinter.com Manuals 
						

							4
Phaser 6000/6010 Color Printer
User Guide63
Printer Specifications
This chapter includes:
•Physical Specifications on page 64
•Clearance Requirements on page 65
•Environmental Specifications on page 66
•Electrical Specifications on page 67
•Performance Specifications on page 68 
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Specifications
Phaser 6000/6010 Color Printer
User Guide 64
Physical Specifications
Weights and Dimensions
Width: 394 mm (15.5 in.)
Depth (with paper tray open): 429.5 mm (16.9 in.)
Height (with output tray open): 294 mm (11.7 in.)
Weight:
• Phaser 6010 Color Printer: 10.7 Kg (23.6 lb.)
• Phaser 6000 Color Printer: 10.6 Kg (23.4 lb.)
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Specifications
Phaser 6000/6010 Color Printer
User Guide65
Clearance Requirements
Total Space Requirements
Width = 80.1 cm (31.5 in.)
Depth = 92.5 cm (36.4 in.)
Height = 39.4 cm (15.5 in.)
Clearance Requirements
p60xx_015
10 cm
(3.9 in.)
30 cm
(12.1 in.)29.5 cm
(11.6 in.)
33 cm
(13 in.)
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Specifications
Phaser 6000/6010 Color Printer
User Guide 66
Environmental Specifications
Temperature
10°–32°C (50°–90°F)
Relative Humidity
Note: Under extreme environment conditions, such as 10°C and 85%RH, defects can occur due to 
condensation approximately 30 minutes after the printer is turned on.
15–85% RH at 28°C (82°F)
Elevation
For optimum performance, use the printer at elevations below 3,100 m (10,170 ft.).
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Specifications
Phaser 6000/6010 Color Printer
User Guide67
Electrical Specifications
Power Source
• 110–127 V, 50/60 Hz, 10 A or less
• 220–240 V, 50/60 Hz, 5 A or less
Power Consumption
• Power Saver mode 2: 7 W or less 
• Power Saver mode 1: 14W or less
• Standby mode: 35 W or less (fuser on)
• Continuous color printing: 265 W or less
• Continuous monochrome printing: 265W or less
This printer does not consume electric power when the power switch is turned off even if the printer is 
connected to an AC outlet.
•E
NERGY STAR qualified printer.
• Default time to Power Saver is 30 minutes and 1 minute.
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Specifications
Phaser 6000/6010 Color Printer
User Guide 68
Performance Specifications
ItemSpecification
Warm-up time Power on: 25 seconds or less.
Recovery from Energy Saver mode: 25 seconds or less.
(assume temperature of 22°C/71.6°F)
Phaser 6000 printer continuous print speed Color: 10 ppm
Black and White: 12 ppm
Note:Print speed can decrease due to paper type, paper size, 
printing conditions, or image quality adjustment.
Phaser 6010 printer continuous print speed Color: 12 ppm
Black and White: 15 ppm
Note:Print speed can decrease due to paper type, paper size, 
printing conditions, or image quality adjustment.
Resolution 600 x 600 x 4 bits
Downloaded From ManualsPrinter.com Manuals 
						

							A
Phaser 6000/6010 Color Printer
User Guide69
Regulatory Information
This chapter includes:
•Electromagnetic Interference on page 70
•Other Regulations on page 72
•Material Safety Data Sheets on page 73
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory Information
Phaser 6000/6010 Color Printer
User Guide 70
Electromagnetic Interference
Xerox® has tested this product to electromagnetic emission and immunity standards. These standards 
are designed to mitigate interference caused or received by this product in a typical office 
environment.
United States FCC Regulations
This equipment was tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential environment. This equipment generates, uses, and can radiate radio 
frequency energy. If it is not installed and used in accordance with these instructions, it can cause 
harmful interference to radio communications. However, there is no guarantee that interference does 
not occur in a particular installation.
To determine if this printer is causing harmful interference to radio or television reception, turn the 
printer off and on. If this equipment does cause harmful interference to radio or television reception, 
correct the interference by one or more of the following measures:
• Reorient or relocate the receiver.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
• Consult the dealer or an experienced radio/television technician for help.
Any changes or modifications not expressly approved by Xerox
® could void the authority of the user to 
operate the equipment. To ensure compliance with Part 15 of the FCC rules, use shielded interface 
cables.
Canada Regulations
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Downloaded From ManualsPrinter.com Manuals