Xerox Phaser 3435DN User Manual

2.6   
PostScript
This menu provides you with the Print PS Error menu item. 
EPSON
This menu sets the EPSON emulation configuration.
ItemExplanation
Print PS 
Error
You can select whether or not your printer prints an 
error list when a PS error occurs.
•Select On to print PS 3 emulation errors. If an error 
occurs, the job stops processing, the error message 
prints, and the printer flushes the job. 
• If this menu is set to Off, the job is flushed without an 
indication of the error.
ItemExplanation...

2.7   
Printing a demo page
Print a demo page to make sure that the printer is operating correctly.
1Press Menu and then OK when Information appears.
2Press the Up/down arrow buttons until Demo Page appears and 
press OK.
A demo page prints out.
Changing the display language 
To change the language that is displayed on the control panel, follow 
these steps:
1Press Menu until System Setup appears on the bottom line of the 
display and press OK.
2Press OK when Language appears.
3Press the Up/down arrow...

3.1   
3 Software overview
This chapter gives you an overview of the software that comes with your 
printer. Further details about installing and using the software are 
explained in the Software Section.
This chapter includes:
• Supplied software
• Printer driver features
• System requirements
Supplied software
You must install the printer software using the supplied CD after you 
have set up your printer and connected it to your computer. 
CD provides you with the following software:
CDContents
Printer...

3.2   
Printer driver features
Your printer drivers support the following standard features:
• Paper source selection
• Paper size, orientation and media type
• Number of copies
In addition, you can use various special printing features. The following 
table shows a general overview of features supported by your printer 
drivers: 
FeatureWindowsMac OS
PCL 6 PostScriptPostScript
Print quality option O O O
Poster printing O
XX
Multiple pages per sheet 
(N-up)OO O
Fit to page printing O O O
Scale printing O...

4.1   
4 Network setup
This chapter gives you step-by-step instructions for setting up your 
printer for network connections.
This chapter includes:
• Introduction
• Supported operating systems
• Configuring TCP/IP
• Configuring EtherTalk
• Setting Ethernet speed
• Restoring the network configuration
• Printing a network configuration page
• Configuring 802.1x
• Configuring CentreWare IS
Introduction
Once you have connected your printer to a network with an RJ-45 
Ethernet cable, you can share the...

4.2   
Configuring TCP/IP
Your printer can be set up with a variety of TCP/IP network information, 
such as an IP address, a subnet mask, a gateway, and DNS addresses. 
There are several ways in which your printer can be assigned a TCP/IP 
address, depending on your network.
• Static addressing: A TCP/IP address is assigned manually by the 
system administrator.
• Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address 
is assigned automatically by the server.
Note 
Before configuring TCP/IP, you...

4.3   
Printing a network configuration page
The network configuration page shows how the network interface card 
on your printer is configured. 
1Press Menu until Network appears on the bottom line of the 
display and press OK.
2Press the Up/down arrow buttons until Network Info. appears and 
press OK.
3Press OK when Ye s appears.
The network configuration page prints out.
Configuring 802.1x
Your printer has 802.1x protocol on its network. 802.1x is a security 
standard for port based network access...

5.1   
5 Loading print media
This chapter will help you understand types of paper you can use with 
your printer and how to properly load paper in the different paper trays 
for the best print quality. 
This chapter includes:
• Selecting print media
• Loading paper
• Selecting an output location
Selecting print media
You can print on a variety of print media, such as plain paper, envelopes, 
labels, and transparencies. Always use print media that meet the 
guidelines for use with your printer. Print...

5.2   
Supported sizes of paper
Note
For duplex printing, A4, Letter, Oficio, Legal, and Folio sizes are supported.
Ty p eSizeDimensionsWeighta
a. If media weight is over 24 lb (90 g/m2), use the multi-purpose tray.
Capacityb
b. Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
Plain paperLetter 215.9 x 279 mm (8.5 x 11 inches)
• 60 to 90 g/m
2 (16 to 24 lb 
bond ) for the tray
• 60 to 163 g/m
2 (16 to 43 lb 
bond ) for the multi-
purpose tray• 250 sheets of...

5.3   
Guidelines for selecting and storing print media
When selecting or loading paper, envelopes, or other print materials, 
keep these guidelines in mind:
•  Always use print media that conform with the specifications listed on 
page 5.3.
•  Attempting to print on damp, curled, wrinkled, or torn paper can cause 
paper jams and poor print quality.
•  For the best print quality, use only high quality copier grade paper 
specifically recommended for use in laser printers.
•  Avoid using the following...