Xerox DocuPrint 255DN User Manual
Here you can view all the pages of manual Xerox DocuPrint 255DN User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 111
Service Menu Chapter 1: Configuring the Printer v1-105 Cleaning Cycle Select an automatic cleaning cycle frequency, based upon the number of prints. The available values are: 100 Images 90 Images 80 Images 70 Images 60 Images 50 Images 40 Images 30 Images 20 Images* 10 Images Never 1. Press Menu Up or Menu Down until you see:Menus Service Menu 2. Press Item Up or Item Down until you see:Service Menu Cleaning Cycle 3. Press Va l u e U p or Va l u e D o w n until you see:Cleaning Cycle = New...
Page 112
Service Menu 1-106 vDocuPrint NC60 System Administrator Guide Show Page Counts Display summary page count data. The available values are: To t a l C o u n t Black Count Cyan Count Magenta Count Yellow Count Total Page count reflects total pages. Color counts are the number of images (full color page contains as many as four color counts).1. Press Menu Up or Menu Down until you see: Menus Service Menu 2. Press Item Up or Item Down until you see:Service Menu Show Page Counts 3. Press Va l u e U...
Page 113
Service Menu Chapter 1: Configuring the Printer v1-107 CRU Usage Display CRU percentage of use data. The available values are: Black Dev. Cart Color Dev. Cart Fuser Module % Print Drum % 1. Press Menu Up or Menu Down until you see:Menus Service Menu 2. Press Item Up or Item Down until you see:Service Menu CRU Usage 3. Press Va l u e U p or Va l u e D o w n until you see:Value Percent Usage 4. Press Item Up or Item Down. You will see:Service Menu CRU Usage 5. Press Online. You will...
Page 114
Service Menu 1-108 vDocuPrint NC60 System Administrator Guide Faults Active Display all active faults on the Control Panel display. The available values are: “Highest Fault” . . “Lowest Fault” Pressing Va l u e U p or Va l u e D o w n in Step 3 scrolls through the messages.1. Press Menu Up or Menu Down until you see: Menus Service Menu 2. Press Item Up or Item Down until you see:Service Menu Faults Active 3. Press Va l u e U p or Va l u e D o w n. You will see:Fault Message Fault...
Page 115
Reset Menu Chapter 1: Configuring the Printer v1-109 Reset Menu Use the Reset Menu to reset various printer functions. The Reset Menu only appears in the Main Menu if the printer is powered on while simultaneously holding down the Online and Enter keys. It is removed after the printer is powered off. Figure 1.17 shows the menu hierarchy. Items in italics appear only if the appropriate option is installed. Refer to Table 1.21 on page 1-110 for step-by-step instructions. Figure 1.17 Reset Menu...
Page 116
Reset Menu 1-110 vDocuPrint NC60 System Administrator Guide Table 1.21 Reset Menu functions Menu Item and FunctionKeystrokesDisplay Factory Defaults Reset the printer operating parameters to factory default settings. The available values are: Yes No* All NVM values are set to factory defaults, with the exception of: “Language” in the System Menu and “Defaults” in the System Menu which are not affected. No NVM values associated with the Ethernet or Token Ring interfaces are reset. Ethernet and...
Page 117
Reset Menu Chapter 1: Configuring the Printer v1-111 CRU Resets Reset the selected CRU. The available values are: COLOR DEV FUSER MOD BLACK DEV PRINT DRUM 1. Press Menu Up or Menu Down until you see:Menus Reset Menu 2. Press Item Up or Item Down until you see:Reset Menu CRU Resets 3. Press Va l u e U p or Va l u e D o w n until you see:CRU Resets Yes 4. Press Enter. You will see:CRU Resets Please Wait 5. When the action is complete, you will see:Ready Restart Printer Re-boot the printer as...
Page 118
Reset Menu 1-112 vDocuPrint NC60 System Administrator Guide Disk Initialize Initialize the Hard Disk Drive. The available values are: Yes No* This function is ignored if the disk is locked (write protected) via a PJL or SNMP command.1. Press Menu Up or Menu Down until you see: Menus Reset Menu 2. Press Item Up or Item Down until you see:Reset Menu Disk Initialize 3. Press Va l u e U p or Va l u e D o w n until you see:Disk Initialize Yes 4. Press Enter. You will see:Disk Initialize Please...
Page 119
Chapter 2: Managing Printer Usage v2-1 Managing Printer UsageC h a p t e r 2 Network Printer Services .................................................... 2-2 CentreWare DP ................................................................. 2-3 CentreWare Internet Services ............................................. 2-4 Downloaded From ManualsPrinter.com Manuals
Page 120
Network Printer Services 2-2 vDocuPrint NC60 System Administrator Guide Network Printer Services Two print service utilities are available for the installation and management of your DocuPrint NC60-- CentreWare DP and CentreWare Internet Services. Each of these services provides you with the capability to easily and quickly accomplish the following tasks with your DocuPrint NC60 from your workstation: • Check printer status. • Remotely configure, monitor, and manage the printer. • Set printer...