Xerox DocuPrint 255DN User Manual

Using the Hard Disk Drive for Secure and Proof Jobs
Chapter 3: Using the Hard Drive
v3-9
Job names can be up to 16 alphanumeric characters and 
passwords must contain four numeric characters (0-7). 
PCL does not support leading zeros in the password. The 
printer assigns a default job name if no name or a name 
with a syntax error is used. The job name is displayed on 
the Control Panel Password Menu when the associated 
password is entered. If a password is not assigned or the 
password contains syntax...

Using the Hard Disk Drive for Secure and Proof Jobs
3-10
vDocuPrint NC60 System Administrator Guide
Creating Proof JobsProof printing lets you print a single copy of a multiple 
copy job. You assign a password and copy count at your 
workstation or computer before printing. The first set is 
printed immediately. You can then go to the printer and 
proofread (proof) the first set. Depending on the outcome 
of the proofing, you can then decide either to continue 
printing the remaining sets or to delete...

Using the Hard Disk Drive for Secure and Proof Jobs
Chapter 3: Using the Hard Drive
v3-11
The job name is limited to 16 alphanumeric characters in 
the range ASCII 30 through ASCII 255,  and . 
The password must contain four numeric characters in 
the range ASCII 48 through ASCII 55. The printer assigns 
a default job name if no name or a name with a syntax 
error is called out. The job name is the name displayed on 
the Control Panel Password Menu when the associated 
password is entered. If no password...

Using the Hard Disk Drive for Secure and Proof Jobs
3-12
vDocuPrint NC60 System Administrator Guide
Printing or Deleting
Secure or Proof JobsSecure or proof jobs may be printed or deleted by using 
the Password Menu, as described in the section “Password 
Menu” (page 1-22). They may also be deleted by using the 
Delete Jobs function in the Reset Menu, as described in 
the section “Reset Menu” (page 1-109).
Downloaded From ManualsPrinter.com Manuals 

Chapter 4: Maintaining the Printer
v4-1
Maintaining the PrinterC h a p t e r 4
Regular Printer Maintenance ..............................................  4-3
Cleaning the Printer ...........................................................  4-4
Cleaning the Grounding Roller and Feed Rollers  ..............  4-5
Cleaning the Print Drum Charger ....................................  4-4
Adjusting Density and Color Balance  ..................................  4-8
Printing a Test Page...

Maintaining the Printer
4-2
vDocuPrint NC60 System Administrator Guide
Procedure E  ..................................................................  4-28
Procedure F  ..................................................................  4-29
Procedure G  .................................................................  4-31
General Troubleshooting  ..............................................  4-32
Downloaded From ManualsPrinter.com Manuals 

Regular Printer Maintenance
Chapter 4: Maintaining the Printer
v4-3
Regular Printer Maintenance
Your DocuPrint NC60 is designed to need very little 
ongoing maintenance other than the replacement of 
maintenance items as they reach their end of use.
To avoid untimely image quality problems, we 
recommend that you replace maintenance items when 
the end of use warnings appear on the Control Panel. 
However, it is always good practice to periodically clean 
any loose toner or foreign matter in your...

Cleaning the Printer
4-4
vDocuPrint NC60 System Administrator Guide
Cleaning the Printer
The cleaning procedures described in this section will 
help you maintain the optimum print quality and 
minimize downtime of your DocuPrint NC60. Before you 
begin, be sure that you have a basic understanding of the 
parts of your printer. Also, pay strict attention to the 
cautions given in each process.
Cleaning the Print
Drum ChargerThe Print Drum Charger is a thin wire mesh used to place 
a charge on the Print...

Cleaning the Printer
Chapter 4: Maintaining the Printer
v4-5
Cleaning the
Grounding Roller and
Feed RollersThe interior rollers, located under the Front Cover, should 
be cleaned only if roller marks appear on prints.
Figure 4.1 Location of Interior Rollers
Ê Grounding Roller
Ë Registration/Precurler Roller
Ì Paper Sensor Switch
Í Paper Feed Rollers
Î Developer Rollers (4) 
(underneath the Print Drum)
There is a small paper sensor switch in the bottom of the 
printer that is easily broken. Use extreme...

Cleaning the Printer
4-6
vDocuPrint NC60 System Administrator Guide
Follow these steps to clean the rollers.
1Raise the Front cover.
2Locate the Print Drum.
When removing and inserting the Print Drum, do 
not allow the green drum to touch any parts of the 
printer. Contact may damage the delicate drum 
degrading print quality.
3Release the latches on both sides of the Print Drum.
4Grasp the Print Drum by the handles and slide it up and 
out of the printer, being careful to not allow the drum to 
come...