Xerox DocuPrint 255DN User Manual

Control Panel Messages
Chapter 5: Troubleshooting
v5-3
E8-OUTPUT JAM
OPEN PRINTERPaper jam in the output roller area.  Open printer, open the Fuser cover, release 
the Fuser lever to clear.
E9-PLEASE CLOSE
PRINTERA printer cover is open. Close cover to resume printing.
EA-COLOR DEV.
MISINSTALLEDColor developer cartridge is not properly installed.
EB-BLACK DEV.
MISINSTALLEDBlack developer cartridge is not properly installed.
EC-PRINT DRUM
MISINSTALLEDPrint drum is not properly installed.
ED-TRAY 2...

Control Panel Messages
5-4
vDocuPrint NC60 System Administrator Guide
FEED 8.5x13
IN MANUAL BYPASSLoad 81/2 x 13 in. paper in manual bypass.
FEED 8x10 PAPER
IN MANUAL BYPASSLoad 8 x 10 in. paper in manual bypass.
FEED A4 PAPER
IN MANUAL BYPASSLoad A4 (210 x 297 mm) paper in manual bypass.
FEED A5 PAPER
IN MANUAL BYPASSLoad A5 (148 x 210 mm) paper in manual bypass.
FEED B5 PAPER
IN MANUAL BYPASSLoad B5 (176 x 250 mm) paper in manual bypass.
FEED C5 ENVELOPE
IN MANUAL BYPASSLoad C5 envelope in manual...

Control Panel Messages
Chapter 5: Troubleshooting
v5-5
FEED SP. FOLIO
IN MANUAL BYPASSLoad Sp. Folio (216 x 315 mm) paper in manual bypass.
FLUSHING
job filename
Printer is removing current job from memory. No action required.
H1-HARD DISK
ERRORH1 - Hard disk error. Power printer off/on; check hard disk connections; 
reformat disk.
H2-HARD DISK
CONTROLLER ERRORH2 - Hard disk controller error. Power printer off/on; check hard disk 
connections.
H3-HARD DISK
IS FULLH3 - Hard disk is full. Print or delete...

Control Panel Messages
5-6
vDocuPrint NC60 System Administrator Guide
J8-REPLACE
PRINT DRUMJ8 - Replace the print drum.
J9-REPLACE
FUSER MODULEJ9 - Replace the fuser module.
JA-REPLACE
FUSER OIL/PADReplace the fuser oil and pad.
JOB HELD
job filename
A print job is being held. Press Enter to resume printing.
LOAD 8.5x13
IN TRAY 1Load 81/2 x 13 in. paper in tray 1.
LOAD 8.5x13
IN TRAY 2Load 81/2 x 13 in. paper in tray 2.
LOAD 8x10 PAPER
IN TRAY 1Load 8 x 10 in. paper in tray 1.
LOAD 8x10 PAPER
IN TRAY...

Control Panel Messages
Chapter 5: Troubleshooting
v5-7
LOAD A5 PAPER
IN TRAY 2Load A5 (148 x 210 mm) paper in tray 2.
LOAD B5 PAPER
IN TRAY 1Load B5 (176 x 250 mm) paper in tray 1.
LOAD B5 PAPER
IN TRAY 2Load B5 (176 x 250 mm) paper in tray 2.
LOAD EXECUTIVE
PAPER IN TRAY 1Load Executive (71/4 x 101/2 in.) paper in tray 1.
LOAD EXECUTIVE
PAPER IN TRAY 2Load Executive (71/4 x 101/2 in.) paper in tray 2.
LOAD INVOICE
8.5x5.5 IN TRAY1Load Invoice (51/4 x 81/2 in.) paper in tray 1.
LOAD INVOICE
8.5x5.5 IN...

Control Panel Messages
5-8
vDocuPrint NC60 System Administrator Guide
OFF LINEPress On Line button to return to “Ready.”
PLEASE WAIT
WARMING UPPlease wait - Warming up
POWER SAVER
MODEPower Saver Mode
PRINTING
job filename
PROCESSING
job filename
READY
SECURE JOB
job filename
T0-RESEAT FUSER
POWER OFF/ONFuser thermistor fault. Reseat the fuser, then power the printer off and on. If the 
fault persists, call for service.
T1-RESEAT FUSER
POWER OFF/ONFuser under temperature fault. Reseat the fuser, then...

Control Panel Messages
Chapter 5: Troubleshooting
v5-9
U1-RAM ERROR
POWER OFF/ONThere is a print engine RAM fault. Power the printer off and on. If the fault 
persists, call for service.
U2-NVRAM ERROR
POWER OFF/ONThere is a print engine NVRAM fault. Power the printer off and on. If the fault 
persists, call for service.
U3-COMM.FAULT
POWER OFF/ONThere is a controller/engine communication fault. Power the printer off and on. 
If the fault persists, call for service.
U4-OPTICS FAULT
POWER OFF/ONThere is a...

5-10
vDocuPrint NC60 System Administrator Guide
Downloaded From ManualsPrinter.com Manuals 

IndexI X
DocuPrint NC60 System Administrator Guide
A
AppSocket Binary PS
Setting
In Ethernet 
Menu
•1-63
In Token Ring 
Menu
•1-75
AppSocket Enable
Setting
In Ethernet 
Menu
•1-62
In Token Ring 
Menu
•1-74
AppSocket PDL
Setting
In Ethernet 
Menu
•1-62
In Token Ring 
Menu
•1-74
B
Baud Rate
Setting
•1-56
Bidirectional
Setting
•1-52Binary PS
Setting
•1-52
,1-55
Black Density
Setting
•1-43
Black Overprint
Setting
•1-47
C
Cancel Changes
Setting
•1-44
Cancel Job
Performing
•1-20
CentreWare DP
•2-3
CentreWare...

D
DocuPrint NC60 System Administrator Guide Color Adjust Menu
Hierarchy
•1-42
Items
Black Density
•1-43
Cancel Changes
•1-44
Color Balance
•1-44
Color Defaults
•1-45
Color Density
•1-43
Color Balance
Adjusting
•4-8
Ý4-15
Adjustment Recovery
•4-15
Setting
•1-44
Test print
•4-10
Color Defaults
Setting
•1-45
Color Density
Setting
•1-43
Color Mode
Setting
•1-47
Configuration Sheet
Printing
•1-92
,1-101
Control Panel
•1-2
Ý1-9
Display
•1-3
Indicator lights
•1-4
Keys
•1-5
Ý1-9
Messages
•5-2
Ý5-9
CRU
Resetting...