Xerox DocuPrint 255DN User Manual

Ethernet Menu
Chapter 1: Configuring the Printer
v1-65 IP Address
Set the four byte IP address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3), 
Item Up 
moves the cursor to the right through 
the displayed IP address and 
Item 
Down moves the cursor to the left. 
This allows you to change characters 
within the string rather than having to 
reenter the entire string.
This item appears only if 
IP Address Res is set to Static
.1. Press 
Menu Up or 
Menu...

Ethernet Menu
1-66
vDocuPrint NC60 System Administrator Guide Subnet Mask
Set the four byte Subnet Mask 
address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3), 
Item Up 
moves the cursor to the right through 
the displayed Subnet Mask address 
and 
Item Down moves the cursor to 
the left. This allows you to change 
characters within the string rather 
than having to reenter the entire 
string.
This item appears only if 
IP Address Res is set to Static...

Ethernet Menu
Chapter 1: Configuring the Printer
v1-67 Default Gateway
Set the four byte Default Gateway 
address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3), 
Item Up 
moves the cursor to the right through 
the displayed Default Gateway 
address and 
Item Down moves the 
cursor to the left. This allows you to 
change characters within the string 
rather than having to reenter the 
entire string.
With the cursor displayed under a 
character, 
Va l u e...

Ethernet Menu
1-68
vDocuPrint NC60 System Administrator Guide Port Timeout
Set the time for determining when to 
end an incomplete print job and poll 
the next port in the polling sequence.
The available values are:
5 - 300 seconds (30*
)
This item also causes an implicit job 
end such as Control D in PostScript or 
 E in PCL, and invokes the 
emulation functions associated with 
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1 
second each time either 
Va l u e  U p or 
Va...

Token Ring Menu
Chapter 1: Configuring the Printer
v1-69
Token Ring Menu
Use the Token Ring Menu to set options for the Token 
Ring port. The menu hierarchy is shown in Figure 1.12 on 
page 1-70.
Refer to Table 1.16 on page 1-71 for step-by-step 
instructions.
Downloaded From ManualsPrinter.com Manuals 

Token Ring Menu
1-70
vDocuPrint NC60 System Administrator Guide
Figure 1.12 Token Ring Menu hierarchy
LPR EnableOn*
Off
LPR PDL
Job Menu
Password Menu
Tr a y  M e n u
PCL Menu
System Menu
Color Adjust Menu
Imaging Menu
Parallel Menu
Serial Menu
Ethernet Menu
Token Ring Menu
Novell Menu
Print Menu
Media Server Menu
Service Menu
Reset Menu
DLC/LLC EnableLPR Banner
DLC/LLC PDL
LPR Binary PS
Static
BOOTP/RARP
DHCP*
DLC/LLC Bin PS
Auto*
PCL
PostScript
5 ... 60*
 ... 300 Seconds
NetBEUI Enable
NetBEUI PDL...

Token Ring Menu
Chapter 1: Configuring the Printer
v1-71
Table 1.16 Token Ring Menu functions
Menu Item and FunctionKeystrokesDisplay
LPR Enable
Enable or disable the Token Ring LPR 
protocol.
The available values are:
On*
Off
1. Press 
Menu Up or 
Menu 
Down until you see:Menus
Token Ring Menu
2. Press 
Item Up or 
Item Down 
until you see:Token Ring Menu
LPR Enable
3. Press 
Va l u e  U p or 
Va l u e  D o w n 
until you see:LPR Enable =
New Value
4. Press 
Enter. You will see:Token Ring Menu
LPR...

Token Ring Menu
1-72
vDocuPrint NC60 System Administrator Guide LPR Binary PS
Enable or disable the LPR binary mode 
of PostScript.
The available values are:
On
Off*
1. Press 
Menu Up or 
Menu 
Down until you see:Menus
Token Ring Menu
2. Press 
Item Up or 
Item Down 
until you see:Token Ring Menu
LPR Binary PS
3. Press 
Va l u e  U p or 
Va l u e  D o w n 
until you see:LPR Binary PS =
New Value
4. Press 
Enter. You will see:Token Ring Menu
LPR Binary PS
5. Press 
Online. You will see:Ready
DLC/LLC...

Token Ring Menu
Chapter 1: Configuring the Printer
v1-73 DLC/LLC Bin PS
Enable or disable the DLC/LLC binary 
mode of PostScript.
The available values are:
On
Off*
1. Press 
Menu Up or 
Menu 
Down until you see:Menus
Token Ring Menu
2. Press 
Item Up or 
Item Down 
until you see:Token Ring Menu
DLC/LLC Bin PS
3. Press 
Va l u e  U p or 
Va l u e  D o w n 
until you see:DLC/LLC Bin PS =
New Value
4. Press 
Enter. You will see:Token Ring Menu
DLC/LLC Bin PS
5. Press 
Online. You will see:Ready
NetBEUI...

Token Ring Menu
1-74
vDocuPrint NC60 System Administrator Guide NetBEUI Bin PS
Enable or disable the NetBEUI binary 
mode of PostScript.
The available values are:
On
Off*
1. Press 
Menu Up or 
Menu 
Down until you see:Menus
Token Ring Menu
2. Press 
Item Up or 
Item Down 
until you see:Token Ring Menu
NetBEUI Bin PS
3. Press 
Va l u e  U p or 
Va l u e  D o w n 
until you see:NetBEUI Bin PS =
New Value
4. Press 
Enter. You will see:Token Ring Menu
NetBEUI Bin PS
5. Press 
Online. You will see:Ready...