Xerox DocuPrint 255DN User Manual
Here you can view all the pages of manual Xerox DocuPrint 255DN User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 41
System Menu Chapter 1: Configuring the Printer v1-35 Table 1.10 System Menu functions Menu Item and FunctionKeystrokesDisplay Language Set the spoken language used for Control Panel display messages, Configuration Sheets, Font Lists, Demo Pages, etc. The available values are: Deutsch English* Español Français Italiano Português(BRA) The value of this setting is not affected by performing a “Factory Default” reset; therefore it does not have a default value apart from the initial value of English...
Page 42
System Menu 1-36 vDocuPrint NC60 System Administrator Guide Paper Size Set the default paper size used in PostScript and PCL. The available values are: Statmt(5.5x8.5) Exec(7.25x10.5) 8x10 Letter(8.5x11)* Legal(8.5x14) Folio(8.5x13) SPFolio(216x315) A4(210x297)* A5(148x210) B5-ISO(176x250) The factory default is a function of the Defaults setting (units=in/mm) in the System menu.1. Press Menu Up or Menu Down until you see: Menus System Menu 2. Press Item Up or Item Down until you see:System...
Page 43
System Menu Chapter 1: Configuring the Printer v1-37 Page Policy Allow the printer to automatically select an alternate paper size and/or type if the requested size and/or type is not loaded. The available values are: Ignore Size Ignore Type Ignore Size/Type Off* If the requested paper (size/type) is not installed, you will be prompted to load the requested paper. If the Page Policy is Off or the Page Policy does not satisfy the request, the printer will wait indefinitely until one of the...
Page 44
System Menu 1-38 vDocuPrint NC60 System Administrator Guide Policy Timeout Set how long the printer will wait before taking the action defined by the setting of Page Policy (page 1-37). The available values, in seconds, are: 300 180 1206030*0 Off 0 means immediately invoke Page Policy. Off means never invoke Page Policy (i.e., wait indefinitely).1. Press Menu Up or Menu Down until you see: Menus System Menu 2. Press Item Up or Item Down until you see:System Menu Policy Timeout 3. Press Va l u...
Page 45
System Menu Chapter 1: Configuring the Printer v1-39 Manual Timeout Set time to force printing of a job designated by the print driver to use media fed from the manual feeder. If media is not inserted into the manual feeder before timeout, the job will be printed on the media present based on printer settings. The available values, in minutes, are: 10 5 4 3 2 1* Off 1. Press Menu Up or Menu Down until you see:Menus System Menu 2. Press Item Up or Item Down until you see:System Menu Manual...
Page 46
System Menu 1-40 vDocuPrint NC60 System Administrator Guide Startup Page Set to determine if a special startup page shall be printed at each power on. The available values are: Ye s * No 1. Press Menu Up or Menu Down until you see:Menus System Menu 2. Press Item Up or Item Down until you see:System Menu Startup Page 3. Press Va l u e U p or Va l u e D o w n until you see:Startup Page = New Value 4. Press Enter. You will see:System Menu Startup Page 5. Press Online. You will see:Ready Print...
Page 47
System Menu Chapter 1: Configuring the Printer v1-41 Defaults Sets default units. This is not changed when a “Factory Default” is performed. The available values are: Inches* (for 110V configuration) Millimeters (for 220V configuration) The following defaults are affected by changing this setting: • System Menu>Paper Size • PCL Menu>FormLength.1. Press Menu Up or Menu Down until you see: Menus System Menu 2. Press Item Up or Item Down until you see:System Menu Defaults 3. Press Va l u e U p...
Page 48
Color Adjust Menu 1-42 vDocuPrint NC60 System Administrator Guide Color Adjust Menu Use the Color Adjust Menu to control and adjust color density, black density, and color balance. The menu hierarchy is shown in Figure 1.7. Refer to Table 1.11 on page 1-43 for step-by-step instructions. Figure 1.7 Color Adjust Menu hierarchy +3 CMY +2 CMY +1 CMY 0 CMY* -1 CMY -2 CMY -3 CMYColor Density Ye s No* Color Balance Cancel ChangesBlack Density Job Menu Password Menu Tr a y M e n u PCL Menu System Menu Color...
Page 49
Color Adjust Menu Chapter 1: Configuring the Printer v1-43 Table 1.11 Color Adjust Menu functions Menu Item and FunctionKeystrokesDisplay Color Density Set to allow fine adjustment to the color density. The available values are: +3 CMY +2 CMY +1 CMY 0 CMY* -1 CMY -2 CMY -3 CMY A change to Color Density (i.e. pressing Enter after a value change) will cause a test print output, based upon the changed value.1. Press Menu Up or Menu Down until you see: Menus Color Adjust 2. Press Item Up or Item...
Page 50
Color Adjust Menu 1-44 vDocuPrint NC60 System Administrator Guide Color Balance Set to allow fine adjustment to the color balance. The available values are: 21 14 20 13 19 12 18 11 17 10 16 0 15 A change to Color Balance (i.e. pressing Enter after a value change) will cause a test print output, based upon the changed value.1. Press Menu Up or Menu Down until you see: Menus Color Adjust 2. Press Item Up or Item Down until you see:Color Adjust Color Balance 3. Press Va l u e U p or Va l u e...