Xerox 700 Digital Color Press User Manual

10-5
User Guide Addendum
Xerox 700 Digital Color Press
Fault code Possible cause Recommended solution
048 100
048 102
048 103
048 900
048 901
048 903 Paper jam
A jam occurred during feeding
•
A jam notification is displayed 
•
on the UI Open  the front door.
•
Carefully remove all sheets and paper scraps from 
•
jam clearance areas.
Close the front door. 
•
Verify the paper used is within the approved  paper 
•
specifications.
048 300 The front door is open. Close the front door.
048 310
048 311
048...

10-6User Guide
Xerox 700 Digital Color Press
Addendum
100V to 240V
Frequency: 50/60 Hz
10 to 32°C, 15 to 85RH
50 to 90°F, 15 to 85RH
Above 82°F (28°C), reduced humidity is required to maintain the \
specified performance.
Specifications
Electrical
Temperature and humidity
Downloaded From ManualsPrinter.com Manuals 

10-7
User Guide Addendum
Xerox 700 Digital Color Press
The High Capacity Stacker (HCS) is an optional finishing device 
that provides stacking and offsetting capabilities for output to 
a Stacker Tray. The HCS connects to the right side of the digital 
press by way of the Interface Module.  The HCS replaces the 
Offset Catch Tray (OCT). Interface Module
High Capacity Stacker (HCS)
The major components of the HCS are as follows:
High Capacity Stacker (HCS)
Overview
Identifying the components
Control...

10-8User Guide
Xerox 700 Digital Color Press
Addendum
Control Panel
The HCS Control Panel consists of:
Sample indicator:
This indicator blinks until a proof set is delivered to the 
Top Tray.
Sample button:
Press this button to have the HCS deliver the next 
collated set to the top tray.
Unload button:
Press once to lower the Stacker Tray and unlock the front 
door.
Unload indicator:
This indicator lights when the Stacker Tray has reached 
the down position and the front door can be opened.
Top Tray jam...

10-9
User Guide Addendum
Xerox 700 Digital Color Press
The Top Tray offers the following:
Copies/prints are aligned easily without folds or winkles in the output.\
•
To enable easier pick-up of the ouput copies/prints, the HCS can be stop\
ped by selecting the Stop button on 
•
the machine's UI.
HCS Trays
Top Tray
Sample Print feature
Sample prints can be printed by performing the following steps:
1.From the [Copy Output] feature, select: Collated or Uncollated
•
Output Destination/Offset Stacker...

10-10User Guide
Xerox 700 Digital Color Press
Addendum
Unloading the Stacker Tray
Use the following procedure to unload the Stacker Tray when it is full, \
or to retrieve a completed job.
Press the Unload button on the HCS Control Panel. The 
Wait light blinks until the Stacker Tray has reached the 
down position.
Open the front door when the Unload Light illuminates.
Position the securing bar on top of the stacked paper.
Pull the Stacker Cart straight out. Remove the securing 
bar.
Remove the paper...

10-11
User Guide Addendum
Xerox 700 Digital Color Press
If a jam occurs, the machine stops printing and a message is displayed o\
n the User Interface (UI). Follow all 
instructions displayed completely and in the sequence shown.
Jam clearance
HCS Entrance Jams (E1, E2, and E3)
Perform the following steps to clear the HCS Entrance jam and resume pri\
nting.
HCS Transport Jams (E4, E5, and E6)
Perform the following steps to clear the HCS Transport jam and resume pr\
inting.
Open the HCS Front Cover....

10-12User Guide
Xerox 700 Digital Color Press
Addendum
HCS Top Tray Jam (E7)
Perform the following steps to clear the HCS Top Tray jam and resume pri\
nting.
Open the HCS Front Cover.
Follow the instructions located inside the Front Cover to 
clear the E1, E2, or E3 jam.
Remove the jammed paper from the Top Tray.
Close the HCS Front Cover.
If the UI indicates there is a jam in the digital press, 
follow the instructions on the screen to remove any 
paper in the area indicates. Refer to the Jam Clearance...

10-13
User Guide Addendum
Xerox 700 Digital Color Press
Fault code Possible cause Recommended solution
049 100
049 101
049 102
049 104
049 106
049 108
049 113
049 114
049 115
049 116
049 117
049 119
049 121
049 900
049 901
049 902
049 903
049 905
049 907
049 908 Paper jam
A jam occurred during feeding
•
A jam notification is displayed 
•
on the UI Open  the front door.
•
Carefully remove all sheets and paper scraps from 
•
jam clearance areas.
Close the front door. 
•
Verify the paper used is within the...

10-14User Guide
Xerox 700 Digital Color Press
Addendum
Fault code Possible cause Recommended solution
049 214
049 215
049 216
049 217
049 218 Senor problem/failure Power off, then power on
049 219 Front door software failure The front door switch is detected as "open," but the front door  is actually closed (locked).  Power off, then power on.
049 220
049 221 Stacker upper limit failure
•
Stacker lower limit failure
• Power off, then power on
049 222
049 223
049 224
049 225
049 228
049 229
049...