Xerox 700 Digital Color Press User Manual
Here you can view all the pages of manual Xerox 700 Digital Color Press User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 211
10-15 User Guide Addendum Xerox 700 Digital Color Press Fault code Possible cause Recommended solution 049 280 049 281 049 282 049 283 049 284 Senor problem/failure Power off, then power on 049 285 049 286 EEPROM error Power off, then power on 049 287 System error Power off, then power on 049 288 Main PWB and Driver PWB are disconnected Power off, then power on 049 300 Upper cover is open Close the upper cover 049 310 HCS download mode failure Power off, then power on 049 700 Error in stacking the...
Page 212
10-16User Guide Xerox 700 Digital Color Press Addendum Fault code Possible cause Recommended solution 049 945 The UI displays a message indicating that the Top Tray is full. Remove all the paper from the Top Tray. 049 960 049 961 049 962 049 963 049 964 049 967 049 969 049 970 049 971 049 972 The UI displays the following message, "Take out the paper stack." Press the Unload button. The Wait light blinks until the Stacker Tray has reached the down position. 1. 2. 3. 4. When the Stacker Tray...
Page 213
![Page 213
10-17
User Guide Addendum
Xerox 700 Digital Color Press
If power is interrupted to the HCS:
Ensure the power cord is plugged in to the proper wall receptacle
•
Ensure that the machine power is switched “On”
•
Ensure that the Ground Fault Indicator is in the "On" position
•
If the power has not been restored by checking the above items, then cal\
l for service
•
Loss of power
Paper guidelines
Specifications
Stacker Tray will accept 64-280 gsm (either coated or uncoated stock) \
with the...](http://img.usermanuals.tech/thumb/82/37951/w300_Xerox_700_Digital_Color_Press-212.png "Page 213
10-17
User Guide Addendum
Xerox 700 Digital Color Press
If power is interrupted to the HCS:
Ensure the power cord is plugged in to the proper wall receptacle
•
Ensure that the machine power is switched “On”
•
Ensure that the Ground Fault Indicator is in the \"On\" position
•
If the power has not been restored by checking the above items, then cal\
l for service
•
Loss of power
Paper guidelines
Specifications
Stacker Tray will accept 64-280 gsm (either coated or uncoated stock) \
with the...")
10-17 User Guide Addendum Xerox 700 Digital Color Press If power is interrupted to the HCS: Ensure the power cord is plugged in to the proper wall receptacle • Ensure that the machine power is switched “On” • Ensure that the Ground Fault Indicator is in the "On" position • If the power has not been restored by checking the above items, then cal\ l for service • Loss of power Paper guidelines Specifications Stacker Tray will accept 64-280 gsm (either coated or uncoated stock) \ with the...
Page 214
10-18User Guide Xerox 700 Digital Color Press Addendum Downloaded From ManualsPrinter.com Manuals
Page 215
Downloaded From ManualsPrinter.com Manuals
Page 216
Downloaded From ManualsPrinter.com Manuals