Xerox 700 Digital Color Press User Manual
Here you can view all the pages of manual Xerox 700 Digital Color Press User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 181
![Page 181
8-47
User Guide Problem Solving
Xerox 700 Digital Color Press
If you are copying your original from the Document Handler, ensure that \
your original is
loaded face up and the document handler guides are against the edges of \
the loaded
originals.
If you are copying your original from the Document Glass, ensure that yo\
ur original is
loaded face down and to the rear left of the document glass.
Partially Blank or Half
Image
Output has a black
border at the edge,
only some of the
image is...](http://img.usermanuals.tech/thumb/82/37951/w300_Xerox_700_Digital_Color_Press-180.png "Page 181
8-47
User Guide Problem Solving
Xerox 700 Digital Color Press
If you are copying your original from the Document Handler, ensure that \
your original is
loaded face up and the document handler guides are against the edges of \
the loaded
originals.
If you are copying your original from the Document Glass, ensure that yo\
ur original is
loaded face down and to the rear left of the document glass.
Partially Blank or Half
Image
Output has a black
border at the edge,
only some of the
image is...")
8-47 User Guide Problem Solving Xerox 700 Digital Color Press If you are copying your original from the Document Handler, ensure that \ your original is loaded face up and the document handler guides are against the edges of \ the loaded originals. If you are copying your original from the Document Glass, ensure that yo\ ur original is loaded face down and to the rear left of the document glass. Partially Blank or Half Image Output has a black border at the edge, only some of the image is...
Page 182
![Page 182
8-48User Guide
Problem Solvin
gXerox 700 Digital Color Press
Damaged Paper
Paper is ripped,
creased or wrinked.
The edges or corners
curl.
Ensure that the paper loaded is within machine specifications. Go to th\
e Paper and Media
section for information on paper specifications and storage.
Load a new ream of paper into the selected paper tray.
Check that the Lighten/Darken scroll on the General Settings tab is set \
to a darker setting.
Light, Faint or Faded
Output is too light or
washed out,...](http://img.usermanuals.tech/thumb/82/37951/w300_Xerox_700_Digital_Color_Press-181.png "Page 182
8-48User Guide
Problem Solvin
gXerox 700 Digital Color Press
Damaged Paper
Paper is ripped,
creased or wrinked.
The edges or corners
curl.
Ensure that the paper loaded is within machine specifications. Go to th\
e Paper and Media
section for information on paper specifications and storage.
Load a new ream of paper into the selected paper tray.
Check that the Lighten/Darken scroll on the General Settings tab is set \
to a darker setting.
Light, Faint or Faded
Output is too light or
washed out,...")
8-48User Guide Problem Solvin gXerox 700 Digital Color Press Damaged Paper Paper is ripped, creased or wrinked. The edges or corners curl. Ensure that the paper loaded is within machine specifications. Go to th\ e Paper and Media section for information on paper specifications and storage. Load a new ream of paper into the selected paper tray. Check that the Lighten/Darken scroll on the General Settings tab is set \ to a darker setting. Light, Faint or Faded Output is too light or washed out,...
Page 183
![Page 183
8-49
User Guide Problem Solving
Xerox 700 Digital Color Press
Ensure that the paper tray guides are against the edges of the loaded pa\
per.
Skewed or Crooked
Output is not straight
but slanted at an
angle. Ensure that the paper loaded is within machine specifications. Go to th\
e Paper and Media
tutorial for information on paper specifications and storage.
Load a new ream of paper into the selected paper tray.
Open the front door and check that there are no obstacles in the paper p\
ath.
Go to the...](http://img.usermanuals.tech/thumb/82/37951/w300_Xerox_700_Digital_Color_Press-182.png "Page 183
8-49
User Guide Problem Solving
Xerox 700 Digital Color Press
Ensure that the paper tray guides are against the edges of the loaded pa\
per.
Skewed or Crooked
Output is not straight
but slanted at an
angle. Ensure that the paper loaded is within machine specifications. Go to th\
e Paper and Media
tutorial for information on paper specifications and storage.
Load a new ream of paper into the selected paper tray.
Open the front door and check that there are no obstacles in the paper p\
ath.
Go to the...")
8-49 User Guide Problem Solving Xerox 700 Digital Color Press Ensure that the paper tray guides are against the edges of the loaded pa\ per. Skewed or Crooked Output is not straight but slanted at an angle. Ensure that the paper loaded is within machine specifications. Go to th\ e Paper and Media tutorial for information on paper specifications and storage. Load a new ream of paper into the selected paper tray. Open the front door and check that there are no obstacles in the paper p\ ath. Go to the...
Page 184
![Page 184
8-50User Guide
Problem Solvin
gXerox 700 Digital Color Press
Ensure that the paper loaded is within machine specifications. Go to th\
e Paper and Media
section for information on paper specifications and storage.
Load a new ream of paper into the selected paper tray.
Unfused Toner Rubs
Off
Ink on the output is
not permanent and
smears, smudges and
rubs off.
Ensure that the paper tray guides are against the edges of the loaded pa\
per.
Misregistration or
Image Shift
The output image is
not in the...](http://img.usermanuals.tech/thumb/82/37951/w300_Xerox_700_Digital_Color_Press-183.png "Page 184
8-50User Guide
Problem Solvin
gXerox 700 Digital Color Press
Ensure that the paper loaded is within machine specifications. Go to th\
e Paper and Media
section for information on paper specifications and storage.
Load a new ream of paper into the selected paper tray.
Unfused Toner Rubs
Off
Ink on the output is
not permanent and
smears, smudges and
rubs off.
Ensure that the paper tray guides are against the edges of the loaded pa\
per.
Misregistration or
Image Shift
The output image is
not in the...")
8-50User Guide Problem Solvin gXerox 700 Digital Color Press Ensure that the paper loaded is within machine specifications. Go to th\ e Paper and Media section for information on paper specifications and storage. Load a new ream of paper into the selected paper tray. Unfused Toner Rubs Off Ink on the output is not permanent and smears, smudges and rubs off. Ensure that the paper tray guides are against the edges of the loaded pa\ per. Misregistration or Image Shift The output image is not in the...
Page 185
![Page 185
8-51
User Guide Problem Solving
Xerox 700 Digital Color Press
1. Many of the special media types (i.e. all Coated papers, Labels and Hea\
vyweight 2 papers) should be fed face-up
(non-inverted). If they are mistakenly fed face-down, jams are very li\
kely to occur at the entrance to the Inverter.
Many of these jams can result in Fuser damage. Setting the media type by\
the GSM is important. When selecting
the media, note the GSM of the paper and select the proper paper type (\
mode).
64 to 105 gsm...](http://img.usermanuals.tech/thumb/82/37951/w300_Xerox_700_Digital_Color_Press-184.png "Page 185
8-51
User Guide Problem Solving
Xerox 700 Digital Color Press
1. Many of the special media types (i.e. all Coated papers, Labels and Hea\
vyweight 2 papers) should be fed face-up
(non-inverted). If they are mistakenly fed face-down, jams are very li\
kely to occur at the entrance to the Inverter.
Many of these jams can result in Fuser damage. Setting the media type by\
the GSM is important. When selecting
the media, note the GSM of the paper and select the proper paper type (\
mode).
64 to 105 gsm...")
8-51 User Guide Problem Solving Xerox 700 Digital Color Press 1. Many of the special media types (i.e. all Coated papers, Labels and Hea\ vyweight 2 papers) should be fed face-up (non-inverted). If they are mistakenly fed face-down, jams are very li\ kely to occur at the entrance to the Inverter. Many of these jams can result in Fuser damage. Setting the media type by\ the GSM is important. When selecting the media, note the GSM of the paper and select the proper paper type (\ mode). 64 to 105 gsm...
Page 186
![Page 186
8-52User Guide
Problem Solvin
gXerox 700 Digital Color Press
For Heavyweight 1 or Coated 1 papers (106 – 176 gsm) 17
inch/431.8 mm or larger
Feed these in HeavyWeight 1/Coated 1 modes Feed these in HeavyWeight 2/Coated 2 modes
Multisheet Feeds from Bypass: Fan the paper stack before loading it int\
o the Bypass tray to prevent multisheet
feeds. If this problem persists, replace paper with a fresh ream.
Running “Long Grain” Heavyweight 1 or Coated 1 papers:
17 inch/431.8 mm or larger Heavyweight...](http://img.usermanuals.tech/thumb/82/37951/w300_Xerox_700_Digital_Color_Press-185.png "Page 186
8-52User Guide
Problem Solvin
gXerox 700 Digital Color Press
For Heavyweight 1 or Coated 1 papers (106 – 176 gsm) 17
inch/431.8 mm or larger
Feed these in HeavyWeight 1/Coated 1 modes Feed these in HeavyWeight 2/Coated 2 modes
Multisheet Feeds from Bypass: Fan the paper stack before loading it int\
o the Bypass tray to prevent multisheet
feeds. If this problem persists, replace paper with a fresh ream.
Running “Long Grain” Heavyweight 1 or Coated 1 papers:
17 inch/431.8 mm or larger Heavyweight...")
8-52User Guide Problem Solvin gXerox 700 Digital Color Press For Heavyweight 1 or Coated 1 papers (106 – 176 gsm) 17 inch/431.8 mm or larger Feed these in HeavyWeight 1/Coated 1 modes Feed these in HeavyWeight 2/Coated 2 modes Multisheet Feeds from Bypass: Fan the paper stack before loading it int\ o the Bypass tray to prevent multisheet feeds. If this problem persists, replace paper with a fresh ream. Running “Long Grain” Heavyweight 1 or Coated 1 papers: 17 inch/431.8 mm or larger Heavyweight...
Page 187
![Page 187
8-53
User Guide Problem Solving
Xerox 700 Digital Color Press
Miscellaneous
System requirements messages (for example, “Order Waste Toner Contai\
ner,” “Hole Punch Waste Container
•
Full”) may occasionally be blocked by the current UI screen. Close t\
he Job Status screen and open the Machine
Status/Supplies screen to check consumable status.
If the machine stops running mid-job, or does not begin printing after a\
job is submitted, check the Machine
•
Status/Supplies screen to determine if supplies...](http://img.usermanuals.tech/thumb/82/37951/w300_Xerox_700_Digital_Color_Press-186.png "Page 187
8-53
User Guide Problem Solving
Xerox 700 Digital Color Press
Miscellaneous
System requirements messages (for example, “Order Waste Toner Contai\
ner,” “Hole Punch Waste Container
•
Full”) may occasionally be blocked by the current UI screen. Close t\
he Job Status screen and open the Machine
Status/Supplies screen to check consumable status.
If the machine stops running mid-job, or does not begin printing after a\
job is submitted, check the Machine
•
Status/Supplies screen to determine if supplies...")
8-53 User Guide Problem Solving Xerox 700 Digital Color Press Miscellaneous System requirements messages (for example, “Order Waste Toner Contai\ ner,” “Hole Punch Waste Container • Full”) may occasionally be blocked by the current UI screen. Close t\ he Job Status screen and open the Machine Status/Supplies screen to check consumable status. If the machine stops running mid-job, or does not begin printing after a\ job is submitted, check the Machine • Status/Supplies screen to determine if supplies...
Page 188
8-54User Guide Problem Solvin gXerox 700 Digital Color Press Downloaded From ManualsPrinter.com Manuals
Page 189
![Page 189
9-1
User Guide
Base configuration
Trays 1, 2, 3: Each trays holds a maximum of 550 sheets of 20 lb./75 gs\
m paper
•
Bypass Tray (Tray 5): Holds a maximum of 250 sheets of 20 lb./75 gsm \
paper
•
Offset Catch Tray (OCT) holds 500 sheets
•
Paper weight range: 18 lb. bond - 80 lb. cover (64-300 gsm)
•
150 seconds or less (after Power on or after exiting the Power/Energy S\
aver
•
mode)
30 seconds or less (after exiting Low Power mode)
•
11.2 seconds or less for color (when the machine is in Ready...](http://img.usermanuals.tech/thumb/82/37951/w300_Xerox_700_Digital_Color_Press-188.png "Page 189
9-1
User Guide
Base configuration
Trays 1, 2, 3: Each trays holds a maximum of 550 sheets of 20 lb./75 gs\
m paper
•
Bypass Tray (Tray 5): Holds a maximum of 250 sheets of 20 lb./75 gsm \
paper
•
Offset Catch Tray (OCT) holds 500 sheets
•
Paper weight range: 18 lb. bond - 80 lb. cover (64-300 gsm)
•
150 seconds or less (after Power on or after exiting the Power/Energy S\
aver
•
mode)
30 seconds or less (after exiting Low Power mode)
•
11.2 seconds or less for color (when the machine is in Ready...")
9-1 User Guide Base configuration Trays 1, 2, 3: Each trays holds a maximum of 550 sheets of 20 lb./75 gs\ m paper • Bypass Tray (Tray 5): Holds a maximum of 250 sheets of 20 lb./75 gsm \ paper • Offset Catch Tray (OCT) holds 500 sheets • Paper weight range: 18 lb. bond - 80 lb. cover (64-300 gsm) • 150 seconds or less (after Power on or after exiting the Power/Energy S\ aver • mode) 30 seconds or less (after exiting Low Power mode) • 11.2 seconds or less for color (when the machine is in Ready...
Page 190
![Page 190
9-2
Specifications
User Guide
Xerox 700 Di
gital Color Press
1-drawer High Capacity
Feeder (HCF/Tray 6)
Sheet size: 8.5 x 11 in./A4
•
Paper weight: 18 lb. bond/64 gsm to 80 lb. cover/220 gsm
•
Capacity: 2000 sheets
•
Sheet size: 7.2 x 10 in./182 x 250 mm/B5 to 13 x 19 in./SRA3/330 x 488 \
mm
•
Paper weight: 18 lb. bond - 110 lb. cover (64-300 gsm) uncoated; 28 l\
b. bond -
•
110 lb. cover (106-300 gsm) coated
Capacity: 1-drawer=2000 sheets; 2-drawer=4000 sheets
•
1-drawer or 2-drawer
Oversized...](http://img.usermanuals.tech/thumb/82/37951/w300_Xerox_700_Digital_Color_Press-189.png "Page 190
9-2
Specifications
User Guide
Xerox 700 Di
gital Color Press
1-drawer High Capacity
Feeder (HCF/Tray 6)
Sheet size: 8.5 x 11 in./A4
•
Paper weight: 18 lb. bond/64 gsm to 80 lb. cover/220 gsm
•
Capacity: 2000 sheets
•
Sheet size: 7.2 x 10 in./182 x 250 mm/B5 to 13 x 19 in./SRA3/330 x 488 \
mm
•
Paper weight: 18 lb. bond - 110 lb. cover (64-300 gsm) uncoated; 28 l\
b. bond -
•
110 lb. cover (106-300 gsm) coated
Capacity: 1-drawer=2000 sheets; 2-drawer=4000 sheets
•
1-drawer or 2-drawer
Oversized...")
9-2 Specifications User Guide Xerox 700 Di gital Color Press 1-drawer High Capacity Feeder (HCF/Tray 6) Sheet size: 8.5 x 11 in./A4 • Paper weight: 18 lb. bond/64 gsm to 80 lb. cover/220 gsm • Capacity: 2000 sheets • Sheet size: 7.2 x 10 in./182 x 250 mm/B5 to 13 x 19 in./SRA3/330 x 488 \ mm • Paper weight: 18 lb. bond - 110 lb. cover (64-300 gsm) uncoated; 28 l\ b. bond - • 110 lb. cover (106-300 gsm) coated Capacity: 1-drawer=2000 sheets; 2-drawer=4000 sheets • 1-drawer or 2-drawer Oversized...