Vodavi Starplus Triad S Installation Programming Manual

ICLID ProgrammingA-9
Chapter  - ICLID / Caller ID
Port Assignment
Programming Steps
1. Press the PORT flexible button (FLASH 56, Button #4) to specify which port to use for 
ICLID information.
2. Enter a valid number for one of the ICLID Ports:
[1] = Port # 1 (RS-232C on optional MISB)
[2] = Port # 2 (RS-232C on optional MISB)
(LCD displays current baud rate assigned to the ICLID Port number.)
3. Press HOLD to accept the data. A confirmation tone sounds and the display updates.
DEFAULT … Port #1.
Ring...

A-10ICLID Programming
Chapter  - ICLID / Caller ID
3. Press Button #21 to select Page C. The display updates. The following message displays to 
indicate current programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the RING DELAY TIMER flexible button (FLASH 40, Page C, Button #2). The 
following message displays:
5. Enter a valid number on the dial pad (00–20) which corresponds to 00-20 seconds.
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates....

ICLID ProgrammingA-11
Chapter  - ICLID / Caller ID
Programming Steps
1. Press the ICLID TABLES flexible button (FLASH 80, Button #8). The following message 
displays:
2. Press the HOLD button. A confirmation tone sounds.
Print ICLID Tables
Description
The Print ICLID Tables command dumps the entire database as a permanent record which 
can serve as a hardcopy of the database. The system baud rate must match that of the printer 
or receiving device. When printing the ICLID Table(s), the following data...

A-12ICLID Programming
Chapter  - ICLID / Caller ID
Figure A-2: ICLID Translation Tables Printout
ICLID NAME BAUD PORT ICLID UNANSWERED CALL TABLE
---------------------------
N Y 9600 1 NONE
ICLID TRANSLATION TABLE ICLID ANSWERED CALL TABLE
----------------------- ---------------------------
NONE
ENTRY ROUTE NAME NUMBER ROUTE RING ASSIGNMENTS
600 ### . ----------------------
601 ### . 00
602 ### . NONE
603 ### .
604 ### . 01
605 ### . NONE
606 ### .
607 ### . 02
608 ### . NONE
609 ### .
610 ### . 03
611...

ICLID ProgrammingA-13
Chapter  - ICLID / Caller ID
13 106
NONE 106A
14 107
NONE 107A
15 108
NONE 108A
16 109
NONE 109A
17 110
NONE 110A
18 ...
NONE ...
19 130
NONE 130A
20 ...
NONE ...
21 150
NONE 150A
... and so on through 99 ...
...
100
100A 170
170A
101
101A ...
...
102
102A 190
190A
103
103A ...
...
104
104A 210
210A
105
105A ... and so on through 252
Figure A-2: ICLID Translation Tables Printout 

A-14 ICLID Call Management Tables
Chapter  - ICLID / Caller ID
ICLID Call Management Tables
Description
Two ICLID Call Management Tables are maintained in the system. These tables consist of an 
Answered Call Management Table and an Unanswered Call Management Table. Each have a 
100-entry capacity.
Answered Call Management Table
Description
The Answered ICLID Table feature adds a table that captures the ICLID calls that were 
answered. The table can store up to 100 entries of the most recently answered...

ICLID Call Management Tables A-15
Chapter  - ICLID / Caller ID
Unanswered Call Management Table
Description
An Unanswered Call Management Table with 100 entry capacity is maintained in the system. 
The calling number/name information pertaining to any unanswered call is placed in this 
table at the time the system determines the call was abandoned.
This table may be accessed from any display telephone to review unanswered calls. Only an 
Attendant station can delete an entry from this table.
Operation
To...

A-16 ICLID Call Management Tables
Chapter  - ICLID / Caller ID 

B
Least Cost Routing
This section describes the Least Cost Routing (LCR) feature and how to program the
eight LCR Tables to: monitor the digits dialed at each station and select the best route
for the call.