Vodavi Starplus Triad S Installation Programming Manual

General Description1-3
Chapter 1 - Introduction
System Features
This page displays a condensed list of the extensive features available in the Triad-S System:
911 Feature 
Account Codes 
Answering Machine Emulation 
Attendant Assignment / Features 
Automatic Call Distribution (ACD) *
Automatic Privacy 
Background Music 
Battery Back-Up (Memory) 
Baud Rate Assignments 
Call Back 
Call Coverage 
Call Forward 
Call Forward - Preset 
Calling Forward Override 
Calling Station Handsfree Mode Override 
Calling...

1-4General Description
Chapter 1 - Introduction
Digital Keyset Telephones
Each Triad-S System provides all the keys, indicators, and features described.
Handset and Speaker are located at the left side of the front panel. A handset is provided to 
allow confidential conversation when desired. Lifting the handset from its cradle (going 
off-hook) disengages the station’s built-in speaker. The speaker is located directly below the 
center portion of the handset. The station may be operated with the handset...

General Description1-5
Chapter 1 - Introduction
Executive 12-Button Speakerphone
The Executive 12-button Digital Telephone has 12
flexible buttons with dual color LEDs that can be
assigned as DSS, CO/PBX/Centrex or feature/function
buttons. Each flexible button can be assigned as a CO/
PBX line, DSS button, Speed Dial or Feature button. As
DSS buttons, station status can be seen in a single
glance. When used as CO/PBX/Centrex buttons, line
status is easily monitored.
The telephone also features 11 fixed...

1-6General Description
Chapter 1 - Introduction
DSS Console
When the DSS Console is added, 48 additional 
buttons can be used to support an attendant or 
answering position.
Digital Keyset/Button Diagram
The following illustration and its corresponding 
table describe the fixed features of the Vodavi 24-Button Digital Display Telephone.
Programming Requirement
A 24-button display telephone is necessary when programming the system features and 
functions available with the Triad-S System.
 
Figure 1-1:...

General Description1-7
Chapter 1 - Introduction
Table 1-1: Digital Key Telephone Buttons
NUMBER FEATURE BUTTON FUNCTION
1Display
(Executive Models only)Displays information about telephone status, dialing directories, and 
text message information.
2h.t.p. Used to select mode of operation: Handsfree, Tone, or Privacy.
3msg Key Used for Auto-CallBack to a telephone which has left a text message 
or to access voice messages.
4conf Key Used to establish conference calls.
5forward Key Used to forward your...












 
 
 
 
 
 

2
Features and Operation
Detailed descriptions of the System and Station features are presented in alphabetical
order. An abbreviated feature index, that is organized in Flash code numerical
sequence, is provided in 
Appendix D. 

2-2About This Manual
Chapter 2 - Features and Operation
About This Manual
Content Summary
Chapters
The following chapters contain the descriptions, programming steps, and operating 
procedures for the more commonly-used features and functions.
2 - Features & Operation
3 - Attendant Features & Operation
4 - Call Distribution - ACD / UCD
Appendices
These Appendix chapters contain detailed information on how to use the more 
complex features available.
A - ICLID / Caller ID
B - Least Cost Routing (LCR)...

About This Manual2-3
Chapter 2 - Features and Operation
Manual Format & Description
This diagram explains how the Features/Operations are organized in the following chapters 
and appendices. The manual format follows the basic outline as shown, but omits those 
elements that do not apply to a particular Feature or Operation.
Feature / Operation
Narrative to explain the feature/operation.
Sub-Feature / Operation
Description
Narrative to explain the sub-feature/operation.
Related Information
Programming...

2-4911 Feature
Chapter 2 - Features and Operation
911 Feature
Description
The 911 Feature allows stations in the system to dial 911 without using an access code. 911 
calls are placed on 911 marked lines. If all lines are busy, an existing call is dropped and the 
911 call is placed.
When this feature is enabled, Trunk Group/LCR Access Code 9 is not available.
Related Information
Programming Steps
To enable/disable the 911 feature:
1. Press the 911 FEATURE flexible button (FLASH 06, Button #13). The...