Vodavi Starplus Dhs/dhs-e User Guide

							14 Features
DSS Console Button Program
F+#+[5] F+#+[5] F+#+[5] F+#+[5]
Hold
Auto F+[9]+[4] F+[9]+[4] F+[9]+[4] F+[9]+[4]
Exclusive FEAT + HOLD FEAT + HOLD FEAT + HOLD FEAT + HOLD
Retrieve HOLD HOLD HOLD HOLD
Intercom call (2 or 3 digits)
10-81 10-81 100-195 100-195
Message Waiting
Cancel F+✳+[9]+[6] F+✳+[9]+[6] F+✳+[9]+[6] F+✳+[9]+[6]
Executive Notify F+[9]+[0] Unavailable F+[9]+[0] Unavailable
Send F+[9]+[6] F+[9]+[6] F+[9]+[6] F+[9]+[6]
Night Service
F+#+[2] F+#+[2] F+#+[2] F+#+[2]
Operator (dial operator station)
[0] [0] [0] [0]
Table 1: Feature Access Codes
FeatureDHS DHS-E
LCD Non-Display LCD Non-Display 
						

							Features 15
Page
All Stations F+[5]+[0] + soft 
buttonF+[5]+[0]+[0] F+[5]+[0] + soft 
buttonF+[5]+[0]+[0]
All (Station and External) F+[5]+[0] + soft 
buttonF+[5]+[0]+[2] F+[5]+[0] + soft 
buttonF+[5]+[0]+[2]
Deny F+[9]+[9] F+[9]+[9] F+[9]+[9] F+[9]+[9]
External Paging Speakers F+[5]+[0] + soft 
buttonF+[5]+[0]+[1] F+[5]+[0] + soft 
buttonF+[5]+[0]+[1]
Meet Me Answer F+[5]+[9] F+[5]+[9] F+[5]+[9] F+[5]+[9]
Station Group (g=group 
number)F+[5]+[0] + soft 
buttonF+[5]+[0]+[3] + g F+[5]+[0] + soft 
buttonF+[5]+[0]+[3] + g
Pause - Displays (P)
F[7]+[0] F[7]+[0] F[7]+[0] F[7]+[0]
Redial - Last Number
F+[8] F+[8] F+[8] F+[8]
Save Dialed Number (SDN)
F+[5]+[1] F+[5]+[1] F+[5]+[1] F+[5]+[1]
Table 1: Feature Access Codes
FeatureDHS DHS-E
LCD Non-Display LCD Non-Display 
						

							16 Features
Speed Dial
Dialing F+[1] F+[1] F+[1] F+[1]
Programming F+#+[1] F+#+[1] F+#+[1] F+#+[1]
Storing (dd = 00-99) F+#+[1] F+#+[1] + dd + n 
+ HOLDF+#+[1] F+#+[1] + dd + n + 
HOLD
Station
Feature Button 
ProgrammingF+#+[3] F+#+[3] F+#+[3] F+#+[3]
Feature Check F+#+[8] Unavailable F+#+[8] Unavailable
Headset Mode F+[9]+# F+[9]+# F+[9]+# F+[9]+#
Intercom Mode Select
(H-T-P)F+[9]+[8] F+[9]+[8] F+[9]+[8] F+[9]+[8]
Lock F+[9]+[7] F+[9]+[7] + pppp 
+ #F+[9]+[7] F+[9]+[7] + pppp + 
#
Table 1: Feature Access Codes
FeatureDHS DHS-E
LCD Non-Display LCD Non-Display 
						

							Features 17
Password Change F+[9]+[7] F+[9]+[7] + pppp 
+ nnnnF+[9]+[7] F+[9]+[7] + pppp + 
nnnn
Unlock F+[9]+[7] F+[9]+[7] + pppp F+[9]+[7] F+[9]+[7] + pppp
System Programming
F+#+✳ + pppppp Unavailable F+#+✳+ pppppp Unavailable
User Saved Number Redial 
(Memo pad saved number)
F+[5]+✳F+[5]+✳F+[5]+✳F+[5]+✳
Voice Mail Monitor
F+[6]+[4] F+[6]+[4] F+[6]+[4] F+[6]+[4]
Voice O ver Busy
(while busy tone is heard) Soft Button F+[5]+[6] Soft Button F+[5]+[6]
Allow F+[9]+✳F+[9]+✳F+[9]+✳F+[9]+✳
Deny F+✳+[9]+✳F+✳+[9]+✳F+✳+[9]+✳F+✳+[9]+✳
Voice Recorder
F+[7]+[2] F+[7]+[2] F+[7]+[2] F+[7]+[2]
Table 1: Feature Access Codes
FeatureDHS DHS-E
LCD Non-Display LCD Non-Display 
						

							18 Features
Account Code
Forced Verified
Description
When enabled, you must dial an account code in order 
to make an outgoing call on a CO line. The system 
compares the code you dialed with those in the 
Account Code Table to verify.
Operation
1. Press an idle CO line button.
2. When you hear a tone, dial a valid account code. 
3. Upon hearing confirmation tone and dial tone, 
you may now dial on the line.
4. The account code will be displayed in the SMDR 
call record printout.
5. If an error occurs, you may re-dial a new account 
code by returning to Step 1. 
Conditions
†If you dial an invalid account code, you will hear 
error tone and will not be able to access the line. 
An Executive telephone will display CALL 
RESTRICTED. Table 2: System Numbering Plan
DHS DHS-E PARAMETERS
01-12 700-717 CO Line Range
10-81 100-195 Station Numbers
82-89 800-807 Hunt Groups / Voice Mail Group
9/0 9/0 CO Line Group Access Code (9 is the default 
code for CO Line access)
0/9 0/9 Operator Code (0 is the default system Operator 
Attendant code) 
						

							Features 19
†When you dial a valid account code, your 
telephone is still monitored for toll restriction 
according to the Class of Service (COS) assigned 
to your telephone.
Unforced/Unverified
Description
You may dial a personal or departmental account 
code for future tracking of time spent on customer 
accounts.
Operation
1. Press an idle line button.
2. Press [FEAT ].
3. Dial [7] +[1].
4. Dial account code.
5. From an Enhanced Telephone, press [✳]. From an 
Executive Telephone, press [save].
6. If an error occurs, you may re-dial a new account 
code by returning to Step 1 in this procedure.
Alarm - Station
Description
You may activate your own private alarm on your 
telephone to remind you of special appointments, 
events, etc. 
Operation
Basic and Enhanced Telephones
To turn ON a signaling alarm:
1. Press [FEAT ]
2. Dial [9] + [2]
3. Dial HHMM where HH is hour, MM is minute (24-
hour clock).
At an Executive Telephone, you may press [bksp] to 
erase each number in the account code, or press [chg] 
to erase the entire account code. 
						

							20 Features
To turn OFF a signaling alarm:
When the alarm time is reached, you will hear tone 
ringing.
1. Press [FEAT ]
2. Dial [✳ ]+ [9] +[2]
Executive Telephones
To turn ON a signaling alarm:
1. Press [FEAT ]
2. Dial [9] + [2]
3. Press CHG
4. Dial HHMM where HH is hour, MM is minute (24-
hour clock).
5. Press [SAVE]
To turn OFF a signaling alarm:
When the alarm time is reached, you will hear tone 
ringing and the display will show:
1. Press [ack]
Canceling an Alarm
To cancel a programmed alarm:
1. Press [FEAT ]
2. Dial [✳] + [9] +[2]. An Executive Telephone will 
display ALARM DELETE.
Conditions
†The alarm clock will be canceled automatically 
after the alarm time is reached.
†SLT stations do not have this feature.
ALARM                   REACHED
ack
The Alarm Clock feature code may be programmed 
on any programmable feature button. 
						

							Features 21
Attendant Administration
Description
Attendant Administration is used to set the features 
Service Mode (Day/Night/Time), System Date and 
Time, and System Speed Dial.
Operation
1. Press [FEAT ]
2. Dial [#] + [0]. The display shows: 
3. Dial the password.
4. Press [save]. The display shows:
5. You have three programming choices:
†System Service Mode
†System Date and Time
†System Speed Dial Numbers
System Service Mode
1. Press [svc]. The display shows:
2. Press [chg] to select between DAY, NITE, and TIME.
3. Press [CLEAR] to exit programming or [back] to 
change other features.
CHK     PSWD   :__   
  bksp   save    chg
SELECT FUNCTION 
 svc      time    spd
SERVICE    :    DAY 
 back    next    chg 
						

							22 Features
System Date and Time
1. Press [time]. The display shows:
2. Press [show]. The display indicates:
3. If the year is correct, press [next].
4. If you are programming a new year, dial the 
numbers for the current year.
5. Press [save]
6. Press [next] to continue programming System 
Date and Time.
7. Press [back] or [next] to return to the main 
Attendant Administration menu. The display will 
show:
System Speed Dial Numbers
1. Press [spd]. The display shows:
2. Dial the System Speed Dial bin [20-99] to be 
changed. 
3. Press [show]. The display will show what is 
currently stored in the speed bin:
SYSTEM   TIME 
 back    next    show
YEAR     :  YR
 back    next    chg
SELECT   FUNCTION
  svc     time    spd
SYSTEM  SPEED  NO
  bksp      show    chg
EMPTY
  back    next    chg 
						

							Features 23
4. Press [chg]. The display will show: 
5. Dial the number to be stored in the bin.
6. Press [save]
7. Press [back] to return to Step 4 and continue 
programming speed dial numbers or press [next] 
to return to the main menu, or press [chg] if the 
speed dial number was incorrectly entered.
Additional Information for Speed Dial
†To enter a CO Line Flash in a Speed Dial bin, enter 
[FEAT ] + [3]. The display shows “\”. To enter a Pause 
in a Speed Dial bin, enter [FEAT ] + [7]+[0]. The 
display changes to “P”.
†To enter a bin chaining command in a Speed Dial 
bin enter [FEAT ]+1+nn.
†When the code [FEAT ] + [7]+[0] or [FEAT ] + [3] is 
entered into a speed dial bin they occupy one 
digit position.
†When the code [FEAT ]+ [1]+nn is entered into a 
speed dial bin it occupies 3 digit positions.
†System Speed Dial bin 99 is reserved for External 
Call Forward, if available on your system. 
Authority Code - Traveling Class of Service
Description
If you have extended dialing privileges, you may 
access your same COS at a telephone without 
extended dialing privileges. Long distance and 
_
  back    next    show
Press [CLEAR] at any time to exit the programming 
mode. The Attendant Administrator code may be 
programmed on any programmable feature button.