Vodavi Starplus 96ex Hybrid Key Telephone System Installation Manual

wARPLUS@ 96EX Key Telephone System 
610.3 TRANSFER RECALL TIMER 
Programming Steps 
if this timer is to be changed: 
A. Press FLASH and dial 1031. The following mes- 
sage is shown on the display phone: 
B. Enter three digits on the dial pad. 
C. Press HOLD button. Display will now update. 
610.4 PRESET FORWARD TIMER 
Programming Steps 
lf this timer is to be changed: 
A. Press FLASH and dial [04]. The following mes- 
sage is shown on the display phone: 
B. Enter two digits on the dial pad. 
C. Press...

sTARPLUS@ 96EX Key Telephone System 
610.7 CONFERENCE TIMER 
Programming Steps 
If this timer is to be changed: 
A. Press FLASH and dial [07]. The following mes- 
saae is shown on the disolav ohone: Description . 
Determines the amount of time an unsupervised 
conference can continue after the initiator of the 
conference has exited the conference. 
Qefault: Default is 10 minutes and is variable from 
01 to 99 minutes. 
A 00 entry disables the timer and means an auto- 
matic disconnect occurs. 
B. Enter...

610.9 PAGING TIMEOUT TIMER 
Programming Steps Description 
If this timer is to be changed: 
A. Press FLASH and dial [09]. The following mes- 
sage is shown on the display phone: Determines the maximum length of a page an- 
nouncement (internal, external or All Call). The sys- 
tem will automatically disconnect the page at the end 
of this time unless the person making the page has 
already hung up. 
8. Enter two digits on the dial pad. 
C. Press HOLD button. Display will now update. 
Default: Default is...

sTARPLUS@ 96EX Key Telephone System 
610.11 HOLD PREFERENCE 
Programming Steps 
If this feature is to be changed: 
A. Press FLASH and dial [ll]. The following mes- 
sage is shown on the display phone: Description 
The system may be programmed to have either 
Exclusive or System Hold preferred. If Exclusive 
Hold is preferred, the user will press the HOLD 
button once for Exclusive Hold and twice for System 
Hold. If System Hold is preferred, the user will press 
the HOLD button once for System Hold and...

610.13 EXTERNAL NIGHT RING 
Programming Steps 
If this feature is to be changed: 
A. Press FLASH and dial [I 31. The following mes- 
sage is shown on the display phone: 
B. To make a change, press the top left button in 
the flexible button field. It will toggle on and off 
with each depression. 
l LEDoff-no 
l LED on = yes 
C. Press HOLD button. 
610.14 ATTENDANT OVERRIDE 
Programming Steps Description 
If this feature is to be changed: When this feature is set for yes, it allows the atten- 
A. Press...

STARPLUS@ 96EX 
Key Telephone System 
610.15 ATTENDANT STATION 
Programming Steps 
If Attendant Stations are to be changed: 
A. Press FLASH and dial [I 51. The following mes- 
sage is shown on the display phone: 
B. Enter up to three(3) three-digit station num- 
ber(s) on the dial pad. 
C. Press HOLD button. 
610.16 LOUD BELL CONTROL 
Programming Steps 
If this feature is to be assigned: 
A. Press FLASH and dial [16]. The following mes- 
sage is shown on the display phone: 
B. Enter a 0 or a 1 to...

sTARPLUS@ 96EX 
Key Telephone System 
610.17 PBX DIALING CODES 
Programming Steps 
If PBX Dialing Codes are to be assigned: 
A. Press FLASH and dial [I 7]. The following mes- 
sage is shown on the display phone: 
B. Enter two digit code numbers, one right after 
the other, on the dial pad up to a maximum of 
ten digits. 
C. Press HOLD button. 
610.18 EXECUTIVE/SECRETARY PAIRS 
Programming Steps 
If Executive/Secretary pairs are to be assigned: 
A. Press FLASH and dial [18]. The following mes- 
sage is...

610.19 UNIFORM CALL DISTRIBUTION (UCD) 
A. UCD 
Group Programming 
Programming Steps 
!f UCD Groups are to be assigned: 
1. Press FLASH and dial (191. The following mes- 
sage is shown on the display phone: 
2. AAA= Atternate UCD Group Assignment 
BBB= UCD Overflow Assignment 
##I#= UCD Station(s) Assignment(s) 
The top left button in the flexible button field will 
be lit for programming UCD group 890. To 
change UCD groups or enter further UCD 
groups (891 to 897), press the appropriate flex- 
ible...

STARPLUS@ 96EX Key Telephone System 
UNIFORM CALL DISTRIBUTION (Cont’d) 
C. Overflow Station Assignment 
Programming Steps 
To program UCD Overflow station: 
1. Press the OVR flexible button (Button #lo). 
2. Enter the three-digit station number (100 to 
195) to designate the UCD Groups overflow 
station. 
3. Press the HOLD button to enter the data. Description 
OVR. When an overflow station is assigned, callers 
that have remained in queue for a specified 
amount 
of time will be routed to the assigned...