Home > Vodavi > Telephone > Vodavi Starplus 96ex Hybrid Key Telephone System Installation Manual

Vodavi Starplus 96ex Hybrid Key Telephone System Installation Manual

Here you can view all the pages of manual Vodavi Starplus 96ex Hybrid Key Telephone System Installation Manual. The Vodavi manuals for Telephone are available online for free. You can easily download all the documents as PDF.

Page 121

sTARPLUS@ 96EX 
Key Telephone System 
BASIC 
KSU 
RIBBON CABLES 
FROM BASIC KSU 
EXPANSION 
KSU 
Figure 500-21 Installing the Expansion KSU 
500-32 
Issue 1, June 1991  

Page 122

sTARPLUS@ 96EX Key Telephone System 
SECTION 600 
CUSTOMER DATA BASE PROGRAMMING 
600.1 INTRODUCTION 
The Starplus 96EX Key Telephone System can be 
programmed to meet each customer’s individual 
needs. All programming is done at station 100 using 
the Enhanced or Executive model Key Telephone as 
the programming instrument. The Executive model 
is suggested since the display is designed to assist 
in programming. 
When the program mode is entered, the Key Tele- 
phone being used no longer operates as a...

Page 123

When using a data terminal (i/O device) to program the system, the following chart presents the data 
terminal characters that are equivalent to the keyset buttons. 
adm>? 
REtlOTE f4DtlIN KEY DEFINITIONS 
Keyset Terminal Keyset 
Terminal 
---------------------------------------- 
HOLD 
FLQSH 
: 
2 
3 
z 
6 
7 
: 
10 
11 
ii 
enable 
disable 
adm> ENTEFVCR FLEX 1 
FLEX 2 
FLEX 3 
FLEX ‘4 
FLEX 5 
FLEX 6 
FLEX 7 
FLEX 8 
FLEX 9 
FLEX 10 
FLEX 11 
FLEX 12 
FLEX 13 
FLEX IQ 
SPEED 
TRRNS 
CQLLBQCK 
DND...

Page 124

. 
BARPLUS@ 96EX Key Telephone System 
FLEX 1 
FLEX 5 
FLEX l3 FLEX 9 
FLEX 10 
FLEX 14 FLEX 3 FLEX 4 
FLEX 7 FLEX 6 
FLEX 11 
FLEX 12 
FLEX 15 FLEX 16 
GHI 
q 4 
PRS 
q 7 TUV q 8 
MN0 
q 
6 H L I 
El 
FLEX17 FLEXl9 FLExlQ FLEX 20 FLEX 21 FLEX22 
Figure 600-2 SP 96EX Default Button Mapping 
Issue 1, June 1991 
600-3  

Page 125

STARPLUS@ 96EX Key Telephone System 
Table 600-l Default Values 
FEATURE 
System Hold Recall Timer 
Exclusive Hold Recall Timer 
Transfer Recall Timer 
Preset Forward Timer 
Pause Timer 
Call Park Timer 
Conference Timer 
MSG Wait Reminder Tone 
Paging Timeout Timer 
CO Ring Detect Timer 
Hold Preference 
Automatic Privacy 
Executive Override Warning Tone 
External Night Ring - LBCl 
Attendant Override 
Attendant Station Assignment 
Loud Bell Control 
PBX Dialing Codes 
Executive/Secretary Transfer 
UCD...

Page 126

Table 600-l Default Values (Cont’d) 
FEATURE 
UCD Timers 
Ring Timer 
MSG int. 
Over flow Timer 
Wrap-Up Timer 
Announcement Table 
Call Forward No Answer Timer 
Voice Mail Groups 
Voice Mail Outpulsing Tables 
Voice Mail Disconnect Table 
Hunt Groups 
Weekly Night Mode Schedule 
Manual or Automatic 
Schedule Programming 
SLT Receiver Timer 
Voice Mail In-Band Digits 
CO Line Programming 
DTMF/Pulse 
CO/PBX 
UNA 
Loop Supervision 
DISA 
Flash Timer 
CO Line Group 
Line COS 
UCD Ringing Assignment 
CO...

Page 127

Table 600-l Default Values (Cont’d) 
. 
FEATURE 
Station Programming (Cont’d) 
LCR cos 
Conference Enable/Disable 
Station Programming 
Station Type 
Station Class of Service 
Speakerphone Operation 
Group Pickup Assignment 
Paging Zone Assignment 
Preset Forward Assignment 
CO Line Group Access 
CO Line Button Assignment 
Automatic Privacy 
Exception Tables 
Allow Table A 
Deny Table A 
Allow Table B 
Deny Table B 
Special Table 1 
Special Table 2 
Special Table 3 
Special Table 4 
Least Cost Routing...

Page 128

sTARPLUS@ 96EX 
Key Telephone System 
600.3 PROGRAM MODE ENTRY (Key Sta- 
tion) 
Programming is performed at station 100 using 
either the Enhanced or Executive Key Telephone. 
Programming is always done at this station regard- 
less of the class of service or which station has been 
assigned the attendant(s). 
Before entering the program mode, the programmer 
must first verify that the Key Telephone is properly 
connected to station 100. To enter the program 
mode: 
A. 
B. 
C. 
D. Press ON/OFF button...

Page 129


				            

Page 130

SECTION 610 
SYSTEM PARAMETERS PROGRAMMING 
610.1 SYSTEM HOLD RECALL TIMER 
Programming Steps 
If this timer is to be changed: 
A. Press FlASH and dial [Ol]. The following mes- 
sage is shown on the display phone: Description 
Determines the amount of time before a call placed 
on System Hold will recall the station placing the 
hold. If unanswered by that station, the call will recall 
the attendant. 
~~ ~~~~~~~~~~~~~~~~~~~~~~ Default: Default value is 060 seconds and is vari- 
....‘.‘................ ....
Start reading Vodavi Starplus 96ex Hybrid Key Telephone System Installation Manual

Related Manuals for Vodavi Starplus 96ex Hybrid Key Telephone System Installation Manual

All Vodavi manuals