Vodavi Starplus 1224ex Electronic Key System Installation Manual

							. rs,..i-, , L _ ,,,.: .,,. x.. .., I.‘ , . . . . 
, 1 .A.‘. . . ..I a- ..- 
STARPLUS 1224u( KEY TELEPHONE SYSTEM 
-- 
600.20 TIMERS 
PROGRAMMING STEPS 
If you are in the program mode, continue using the 
program codes. If you are starting to program 
here, enter the program mode first. DESCRIPTION 
Exclusive Hold Recall 
To change this timer, dial an (*) asterisk 
. 
and 22 on the dial pad. 
lf you have a display phone, you will see the follow- 
ing: This refbcts the time before an outside line 
placed on exclusive hold will recall the initiating 
station. If the call is unanswered for an addition- 
al equal amount of time, it will recall the, atten- 
dant and if unanswered by the attendant will 
recall all phones in the system. 
Default is 060 seconds. 
EXCLUSIVE HOLD RECALL 
r 060 SECONDS 
Dial 3 digit number between 000 and 255 
* ( seconds). 
An entry to 000 will disable the 
timer. 
. Press HOLD to enter data. 
Display will now update. 
System Hold Recall 
. To change this timer, dial an (*) and 23 on 
the dial pad. 
If you have a display phone, you will see: This timer reflects the amount of time before an 
outside line placed on system hold will recall the 
initiating station. If the call is unanswered for an 
additional equal amount of time, it will recall the 
attenoant and if unanswered by the attendant 
will recall all phones In the system. 
Default is 050 seconds. 
. Dial 3 digits between 000 and 255 
(seconds). 000 will disable the timer. 
. Press HOLD to enter. 
Display will now update. 
‘_ 
a  
						

							STARPLUS 1224EX KEY TELEPHONE SYSTEM 
. 
I 
! 
I a 
PROGRAMMING STBPS 
Transfer Recall 
. To change this timer, dial an (*) asterisk 
and 
24 on the dlai pad. 
If you have a display phone, you will see the follow- 
ing: DESCRlPTlON 
. 
Thls timer refiects the amount of time before an 
unanswered transfer is recalled to the station 
that initiated it. if the call is still unanswered for 
an additlonal equal amount of time, it will recall 
the attendant and lf unanswered by the atten- 
dant will recall all phones in the system. 
Default is 039 seconds. 
. Dial 3 digit number between 000 and 255 
(seconds). 009 will disable the timer. 
. Press HOLD to enter data. 
Display will now update. 
Message Wait Reminder Tone 
. To change this timer, dial an (*) asterisk 
and 25 on the dial pad. 
If you have a display phone, you wiil see thefoilow- 
ing: A station with a message waiting can be 
reminded at a timed interval with a tone. The 
tone will continue until ail messages have been 
answered. The fntervai can be programmed be- 
tween 90 and 99 minutes. 
By default the timer is disabled. 
MSG Reminder Tone Timer 
00 MINUTES 
. Dial a 2 digit entry between 90 and 99 
(minutes). 00 disabies the timer. 
. Press HOLD to enter. 
Display will now update. 
JULY 1989 6-21  
						

							., .“, 
i.‘,,.~ -,.*. L,.L-...LL-;-bL .* . ..\. ‘&r..‘” .‘.‘r... I . ..Ic’-2..’ _. ’ .-. I’ . . . .’ ’ - .- . . . .._ .,...I’. . . . . . . . .,I , . .._ 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
PROGRAMMING STEPS 
Pause Timer 
. To change this timer, dial an (*) asterisk 
and 26 on the d&i pad. 
if you have a display phone, you will see thefdlow- 
ing: 
PAUSE TIMER 
2 SECONDS 
Dial a 1 digit entry between 1 and 9 
. (seconds). 
. Press HOLD to enter data. 
Display will now update. DESCRIPTION 
When dialing a speed number, a timed pause in 
digit sending can be inserted into the number. 
The iangth of the pause is contrdled by the 
pause timer and can be from 1 to 9 seconds. 
The length of the pause is important in both sys- 
tem and station speed d&i numbers. 
Defaua is 2 seconds. 
c 
.  
						

							_ , ,.. _. -_.. .--- 
STARPLUS 1224EX 
-- KEY TELEPHONE SYSTEM 
600.21 EXECUTIVE/SECRETARY ASSIGNMENTS 
PROGRAMMING STEPS 
lf you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
. To program executive/secretary assign- 
ments, dial an asterisk (*) and 27 on the 
dial pad. 
If you have a display phone, you will see: 
. 
DESCRIPTION 
There are 4 sets of Executive/Secretary pairs 
available for assignment. When the Executive 
Is busy or in OND, Intercom calls and transferred 
calls will be automatically routed to the 
secretary. 
One executive can go to 4 secretaries, 1 
secretary can answer for 4 executive or 1 execu- 
tfve can be assigned 1 secretary, etc. ’ 
. 
. 
! - 
i . EXECUTIVE/SECRFTARY *NOTE: If either station is number 22-33, press 
STATION RANGE button first. 
I I I I By default there are no pairs assigned. 
. Press button for desired execu- 
tiq/secretary pair assignment. 
. Press the station button to select the 
desired executive station (LED lights 
steady).* 
. Press the station button to select the 
desired secretary station (LED flashes).* 
. Press HOLD to enter.  
						

							STARPLUS 1224EX KEY TELEPHONE SYSTEM 
600.22 LOUD l33L/A4EAD 
/ 
1 
PROGRAMMING STEPS PESCRlPTlON 
If you are in the programming mode, continue 
using the program codes. if you are starting to 
program here, enter the program mode first. Four contacts are available to be assigned 
either as loud bell control or as A-Lead indica- 
tion. 
. Dial an asterisk (*) and 28 on the dial pad. A Loud Bell contact can be assigned to any sta- 
ticns and will follow the ringing assignments of 
the assigned station including tone ringing in- 
ic>zogm, recalling and transferred CO lines. 
if you have a display phone, you will see: 
. Press the button of the contact to be 
programmed. 
. Press the LBC or A-Lead button to indicate 
which is being programmed. 
. Then press station (LBC), or CO line (A- 
Lead) button to be assigned. if the station 
being assigned is in the 22-33 number 
range, press STATION RANGE button 
first. 
. Press HOLD to enter. /- Mead contact can be assigned to any CO 
ii: 
R -ember to assign ringing to any station 
p;. -Trammed f 
or Loud Bell Control, Sec. 
IX 
5. Also a station programmed for A-Lead 
iix lion, must be given that CO line ap- 
pa, x-e, Sec. 600.9. 
To rc love an LBC or A-Lead assignment, tog- 
gle r 
the station or CO line and press HOLD. 
JULY 
1969 6-24  
						

							. 
. 
..* _ .- 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
600.23 P5X DWIJNG CODES 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
. To enter PBX Dialing codes, dial an 
asterisk (*) and 31 on the dial pad. DESCRIPTION 
Four 1 or 2 digit PBX access codes can be 
entered into system memory. When dialed they 
signal the system that an access code is being 
dialed and that toll restriction is to be applied at 
the next dialed digit 
Otherwise toll restriction does not apply. 
If you have a display phone, you will see: 
. Press the program button to assign the 
first code. This allows diafing of PBX extensions 1’00, 110, 
111. etc. 
tines must be programmed as PBX lines (Sec. 
600.74) 
before th8S8 COd8S Wi/i apply. 
. Enter the 1 or 2 digit number on the dial 
pad- 
. Press HOLD to enter data. 
onnn 
0000 
i 
! - 0000 
I - 0000 
I . 
clru 
ucln 
uuu 
clue 
A one digit cd8 may be used. 
By default, no codes have been assigned. 
JULY 1989 
6-25  
						

							. . ..:, 
,. . . . 8’ .* 
A,‘,)-.* dI,.:. ,.,;QdiLl;l..: .- 
d .,’ . . ._,. “.. .‘..’ .- ,. , . . ;. ,,. ,, , ., 
.-IL..*-1 ..,. . . ..I..’ +* ,a-,.* . . .- - I,- 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
-- 
600.24 AllEN T POSITION 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
. If you wish to change the attendant posi- 
tion, dial an asterisk (*) and 32 on the dial 
pad. 
. Press the station button of the station to 
be assigned as the system attendant. If 
the station is between 22 and 33, press the 
STATION RANGE button first. 
. Press HOLD to enter data. One station must be assigned as the attendant 
for CO line recalls and placing the system into 
night service by pressing the DND button. 
Thereforeattendant position does not have the 
Do Not Disturb feature. 
System speed numbers are entered at the atten- 
dant station. The attendant can override sta- 
tions in DND with the Camp On feature. 
Re.ier to Do Not Disturb programming (Sec. 
6iX. 7), recall timers (Sec. 600.20), and line ring 
assignments (Sec. 600.15). 
By Mault, station 10 is assigned as the atten- 
darr position. 
600.25 PRESET FORWAi33 RING TIMER 
PROGRAMMING STEPS 
DESCRIPTION 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
l 
If you wish to set this timer, dial an asterisk 
(*) and 33 on the dial pad. 
If you have a display phone, you will see the follow- 
ing display: This timer determines the amount of time a call 
wii: , jng into a station before automatically for- 
WL *ing to the predetermined station. 
DF :Jlt sets the timer at 30 seconds. 
Rsr;tr 
to preset forward station programming 
(Se ‘Y. 660.26). 
An ;~trd of 06 will disable the timer. 
If the timer 
i:; C: :&ied, the preset forward will NOT work. 
The xii will not forward. 
. Dial a 2 digit number between 01 and 99. 
. 
Press HOLD to enter data. 
JULY 1969 6-26 -  
						

							._,_ ,_ ,.. .- 
STARPLUS 1224Ex KEY TELEPHONE SYSTEM 
600.26 PRESEr CALL FORWARD 
. 
. 
j a 
, 
. 
PROGRAMMING STEPS 
. If you wish to assign a preset forward posi- 
tion to a station, dial an (*) asterisk and 34 
on the dial pad. ’ 
If you have a display phone, you will see: 
. Press the station button for the station 
being given a preset forward position.* 
. Then press the station button of the sta- 
tion which is to receive the forwarded ring- 
ing.* 
. Press HOLD to enter. 
. 
DESCRlPTlON 
Ringing CO lines can be forwarded to another 
predetermined station lf the original station is 
busy or does not answer. These lines will ring 
for a programmed period of time before for- 
warding. During this time the busy station will 
hear muted ringing. 
By default no stations are assigned a preset for- 
ward station. 
An unlimited number of assignments can be 
made but an indlvldual station can have only 
one preset forward assignment. A statlon may 
receive an unlimited number of forwards. 
.To remove an assignment, first press the station 
wlth the preset forward assignment, then press 
that statlon a second time and press HOLD. 
Refer to flexible button programmlng (Sec. 
600.9). ff a station has a preset forward to 
another sratlon, that station most be 
programmed to have access to the forwarded 
line. Also that station must be programmed to 
ring on that line 
(Sec. 500.15). 
WOTE: If the STATION RANGE button is iii, it means 
that the station indicated is in the upper range (22- 
33). For example, station button 16/26 is lit - if the 
STATION FLANGE button is lit, station 26 is being 
programmed: if STATION RANGE button is not lit, sta- 
tion 16 is being programmed. 
JULY 1989 6-27  
						

							,J.;.- :,‘:.,,.J ..,, .dd 2s s. i:,, ..:L.‘\: , , _ :.. :r: ,..-‘.- ..‘. ,* :... ..-; , ._.. I,. . . 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
--- 
600.27 CONFERENCE TIMER 
I 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. DESCRIPTION 
This timer reflects the amount of time a con- 
ference circuit will remain active if the initiator of 
the conference is no longer in a multi line con- 
ference. . 
. If you wish to change the conference 
timer, dial an asterisk (*) and 35 on the dial 
pad. A warning tone will be sounded to the remain- 
ing users 15 seconds prior to shutdown. 
If you have a display phone, you will see the follow- By default the conference timer is set at 15 
ing display: minutes. 
I 
CONF TIME-OUT TIMER 
15 MINUTES 
I 
. Dial a 2digit number between 01 and 99. 
. Press HOLD to enter data. An entry of 00 will disable the timer. 
600.28 SMDR 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
If you wish to disable SMDR, dial an 
asterisk (*) and 36 on the dial pad. 
Press CO line(s) for which SMDR is to be 
disabled or enabled. 
LED on = enabled 
LED off = disabled 
To determine what calls are to be recorded, baud 
rate and print format, dial an asterisk (*) and 37 on 
the dial pad. 
. Press the program button to determine 
when all calls are to be recorded or just 
long distance calls. 
- LED off = long distance 
- LED on = all calls DESCRIPTION 
S?ation tiessage Detail Recording is an option- 
al feature that allows customers to keep track of 
either eji calls or only long distance calls both 
incomi; ig and outgoing by CO line, number 
dialed, :ime of day, date, station that placed the 
call, du:ation of call and account code if used. 
By default all CO (outside) lines are enabled for 
SMC3 recording. NOTE: An RCU and an SIU 
musr be installed for this feature to work. Refer 
to S;c. ii00 (Installation). 
SMIX can be programmed to record all calls, 
both ncoming and outgoing or it can be 
progxnmed to record only outgoing long dis- 
tance. . 
Long distance calls are calls of over 7 digits or 
calls that begin with a ‘0” or a O’lll. 
By default all calls are recorded. 
(I) 
JULY 1989 6-28  
						

							. 
I 9 
/ 
I 
I 
l 
PROGRAMMING STEPS 
. Press the program button to determine 
baud rate. 
_ LED off = 1200 baud 
_ LED on = 300 baud 
. Press the program button to determine 
print format. 
- LED off = 29 character 
- EDon= 80 character 
. Press HOLD to enter data. DESCRlPllON 
Thebaudratecanbesetat3OOor12CjObaud. 
By default the baud rate is set at 300 (LED’ on). 
Print format can be set at either 29 characters 
or 80 characters. By defautt format is 29 charac- 
ters (LED off). 
FORMAlS 
29 ctlaracter 
bASEHH:MMHH:MM:SSMM/DD/W 
cc cc  . . . . . . . . . . 
DD.....DD 
SO Character 
AASBHH:MMHH:MM:SSMM/DD/WCC...CC 
DD.....DD 
AA = 2 digit originating station 
BB = 2 digit line number 
HH:MM = call duration 
HH:MM:SS = time call originated 
MM/DD/YY = date call originated 
CC.....CC = telephone number dialed 
DD.....DD 
= account code (8 digits maxi- 
mum) * 
JULY 1989 6-29