Vivitek Qumi Q6 User Manual

							45
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
Main 
MenuSub MenuSettings
ImageDisplay ModePresentation, Bright, Game, 
Movie, TV, sRGB, User, 
User1
Brightness0~100
Contrast0~100
AdvancedBrilliant Color1~10
Sharpness0~31
Gamma1.8, 2.0, 2.2, 2.4, B&W 
Linear
Color TemperatureWarm, Normal, Cold
Color ManagerRed-50~0
Green-50~0
Blue-50~0  
						

							46
OSD Menu Overview
Main 
MenuSub MenuSettings
Settings1Source
ProjectionFront, Rear, Ceiling, 
Rear+Ceiling
Aspect RatioFill, 4:3, 16:9, Letter Box, 
Native, 2.35:1
Keystone-40~40
Digital Zoom-10~10
AudioVolume0~10
MuteOff, On
Advanced 1LanguageEnglish, Français, Deutsch, 
Español, Português, 簡体中
文, 繁體中文, Italiano, Norsk, 
Svenska, Nederlands, 
Русский, Polski, Suomi, 
Ελληνικά, 한국어, Magyar, 
Čeština, ةيبرعلا , Türkçe, 
Việt, 日本語, ไทย, یسراف , 
עברית 
Security LockOff, On
Blank ScreenBlack, Red, Green, Blue, 
White
Splash LogoOff, On
Keypad LockOff, On
3DSetting3DOff, DLP-Link, IR
3D Sync InvertOff, On
Auto KeystoneOff, On
Advanced 2Test PatternNone, Grid, White, Red, 
Green, Blue, Black
H Image Shift-50~50
V Image Shift-50~50
   
						

							47
OSD Sub-Menu Overview
Main 
MenuSub MenuSettings
Settings 2Auto SourceOff, On
No Signal 
Power Off(min)
0~180
Auto Power OnOff, On
LED ModeEco, Normal
Reset All
StatusActive Source
Video 
Information
LED Hours 
(Eco, Normal)
Software 
Version
Advanced 1Menu PositionCenter, Down, Up, Left, 
Right
Translucent 
Menu
0%, 25%, 50%, 75%, 
100%
Low Power 
Mode
Off, On
Fan SpeedNormal, High
Advanced 2Sleep Timer0~600
Source FilterHDMI 1 / MHLDisable, Enable
HDMI 2Disable, Enable
USBDisable, Enable
White 
Calibration  
						

							48
Image Menu
To access the Image menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Image menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Image menu and 
press .
4. Press the ◄ or ► button to change values for each applicable setting.
ItemDescription
Display ModePress the ◄ or ► button to set the display mode.
BrightnessPress the ◄ or ► button to adjust the display brightness.
ContrastPress the ◄ or ► button to adjust the display contrast.
AdvancedPress  to enter the Advanced menu. See Advanced on page 
49.
Color ManagerPress  to enter the Color Manager menu. See Color Manager 
on page 50.
Note: 
Color Manager is adjustable only when the Display Mode is set to User1.  
						

							49
Advanced
To access the Advanced menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Image menu.
3. Press the ▲ or ▼ button to move to the Advanced menu and press .
4. Press the ▲ or ▼ button to move the cursor up or down in the Advanced menu.
ItemDescription
Brilliant ColorPress the ◄ or ► button to adjust the brilliant color value.
SharpnessPress the ◄ or ► button to adjust the display sharpness level.
GammaPress the ◄ or ► button to adjust the gamma correction of the 
display.
Color TemperaturePress the ◄ or ► button to adjust the color temperature.  
						

							50
Color Manager
To access the Color Manager menu and adjust the settings, perform the following:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Image menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Color Manager menu 
and press .
4. Press the ◄ or ► button to change values for each applicable setting.
ItemDescription
RedPress the ◄ or ► button to adjust the LED Red PWM.
GreenPress the ◄ or ► button to adjust the LED Green PWM.
BluePress the ◄ or ► button to adjust the LED Blue PWM.  
						

							51
Settings 1 Menu
To access the Settings 1 menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Settings 1 menu.
3. Press the ▲ or ▼ button to move the cursor up and down in the Settings 1 menu 
and press .
4. Press the ◄ or ► button to change values for each applicable setting.
ItemDescription
SourcePress  to enter the Source menu.
ProjectionPress the ◄ or ► button to choose from four projection methods: 
Front, Rear, Ceiling-Front, Ceiling-Rear.
Aspect RatioPress the ◄ or ► button to adjust the video aspect ratio.
KeystonePress the ◄ or ► button to adjust the display keystone.
Digital ZoomPress the ◄ or ► button to adjust the digital zoom in or zoom out.
AudioPress  to enter the Audio menu. See Audio on page 52.
Advanced 1Press  to enter the Advanced 1 menu. See Advanced 1 on page 
53.
Advanced 2Press  to enter the Advanced 2 menu. See Advanced 2 on page 
55.  
						

							52
Audio
To adjust the audio settings, press  to enter the Audio sub menu.
ItemDescription
VolumePress the ◄ or ► button to adjust the audio volume.
MutePress the ◄ or ► button to turn on or off the speaker.  
						

							53
Advanced 1
To adjust the advanced settings, press  to enter the Advanced 1 sub menu.
ItemDescription
LanguagePress the ◄ or ► button to select a different localization menu.
Security LockPress the ◄ or ► button to enable or disable security lock 
function.
Blank ScreenPress the ◄ or ► button to select different color to blank the 
screen.
Splash LogoPress the ◄ or ► button to show logo or not.
Keypad LockPress the ◄ or ► button to enable or disable keypad lock 
function.
3D SettingPress  to enter the 3D menu. See 3D Setting on page 54.
Auto KeystonePress the ◄ or ► button to enable or disable automatic keystone.
Note: 
To use the 3D function, the Play Movie in 3D setting found in your player\
 under the 3D Disc 
Menu must be enabled. 3D functionality works when the input source suppo\
rts 120Hz. 
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This\
 is the default setting. 
2. When the projector is connected to an appropriate 3D source, the 3D OSD\
 menu item is 
enabled for selection. 
3. Use 3D glasses to view a 3D image. 
4. You need 3D content from a 3D DVD or 3D media file. 
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-o\
ff selection 
feature). 
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install 
a driver on your PC and connect a USB emitter. 
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 
8. Power on the glasses. Glasses normally have a power on-off switch. Each\
 type of glasses has 
their own configuration instructions. Please follow the configuration instructions that come with 
your glasses to finish the setup process.  
						

							54
3D Setting
To adjust the 3D settings, press  to enter the 3D Setting sub menu.
ItemDescription
3DPress the ◄ or ► button to select Off, DLP-Link or IR.
3D Sync InvertPress the ◄ or ► button to turn 3D sync Invert on or off.