Vivitek Qumi Q6 User Manual

							25
Internal Memory
The Internal Memory tool provides functionality for saving external media files in the Qumi. 
1. In EZ Media, press the ◄ or ► on the remote to select Internal Memory and press 
.
2. Press the ◄ or ► on the remote to select Photo, Video, Music or Office Viewer.
FunctionDescription
PhotoAllows you to display photos and provide slide show functionality.  
See Photo on page 28.
VideoAllows you to play movie files. See Video on page 29.
MusicAllows you to play audio files. See Music on page 30.
Office Viewer
Allows you to display documents files. See Office Viewer on page 
31.
Note: 
Bold text in Simplified Chinese format and password protected files are 
not supported.   
						

							26
USB
The USB tool provides functionality to display media files from a connected USB drive.
1. In EZ Media, press the ◄ or ► on the remote to select USB and press .
2. Press the ◄ or ► on the remote to select Photo, Video, Music or Office Viewer.
FunctionDescription
PhotoAllows you to display photos and provide slide show functionality.  
See Photo on page 28.
VideoAllows you to play movie files. See Video on page 29.
MusicAllows you to play audio files. See Music on page 30.
Office Viewer
Allows you to display documents files. See Office Viewer on page 
31.
Note: 
Bold text in Simplified Chinese format and password protected files are 
not supported.   
						

							27
Settings
The Settings menu allows access to settings for the System, Photo, Video and Music 
functions.
1. In EZ Media, press the ◄ or ► on the remote to select Settings and press .
2. Press the ◄ or ► on the remote to select System, Photo, Video or Music and 
press  to adjust the settings.
FunctionDescription
System
Version: Displays the software version.
Language: Select the interface language (default: English).
Update: Select to update the firmware version (USB, SD or OTA).
Caution:  
Make sure the firmware update process nor the power to the Qumi is 
interrupted during an update to prevent damage to the system board.
Photo
Display Ratio: Select a display ratio (Original or Full Screen).
Slideshow Pattern: Select a slideshow pattern (random, Ring 
Diffusion, Middle Enlarge, Expand Blink, Window Shades, Linear 
Interaction, Cross Interleaved, Banding Alternate or Rectangle 
Enlarge).
Slideshow Duration: Select a duration time for the set pattern (10 sec, 
30 sec or 1 min). 
VideoRepeat Mode: Select a repeat mode (Sequence, Single, Random or 
Once).
MusicRepeat Mode: Select a repeat mode (Sequence, Single, Random or 
Once).  
						

							28
Photo
The available images in the connected USB drive or device are listed in the Photo menu.
Press the ▲, ▼, ◄ or ► on the remote to select the image and press  to display. The 
Control Panel displays at the middle of the image. The following functions are available 
through the Control Panel.
IconDescription
Rotate the image counter clockwise 90°.
Rotate the image clockwise 90°.
Select to zoom in on the image.
Select to zoom out on the image.
If image is scaled outside screen border, press to scroll image up.
If image is scaled outside screen border, press to scroll image down.
Select to scroll to the previous image.
Select to scroll to the next image.
Play the image again.
Select to start a slideshow of all the images in the internal memory or the USB 
device.
Select to display the photo information.
Select to display the photo settings.  
						

							29
Video
Available videos in the connected USB drive or device are listed in the Video menu.
Press the ▲ or ▼ on the remote to select the video and press  to display. A Control 
Panel also displays with the image. The following table displays the available functions.
IconDescription
Select to move the play selection to the previous file in order.
Select to reverse the current play marker.
 / Select to play the selected file. Press again to pause or play the selection.
Select to move forward the current play marker.
Select to move the play selection to the next file in order.
Select to repeat the play selection.  
						

							30
Music
Available music in the connected USB drive or device are listed in the Music menu.
Press the ▲ or ▼ on the remote to select the music and press  to display. A Control 
Panel also displays with the music. The following table displays the available functions.
IconDescription
Select to move the play selection to the file previous in order.
Select to reverse the current play marker.
 / Select to play the selected file. Press again to pause or play the selection.
Select to stop the selected file.
Select to move forward the current play marker.
Select to move the play selection to the file next in order.
Select to repeat the play selection.  
						

							31
Office Viewer
Available documents in the connected USB drive or device are listed in the Office Viewer 
menu.
Press the ▲ or ▼ on the remote to select the document and press  to display. A 
Control Panel also displays with the document. The following table displays the available 
functions.
IconDescription
If document is scaled outside screen border, press to scroll document left.
If document is scaled outside screen border, press to scroll document right.
Select to zoom in on the document.
Select to zoom out on the document.
Select a display mode (Fit to Screen, Fit to Height or Fit to Width).
Select to hide the Control Panel.
Note: 
In Display mode, press ▲, ▼, ◄ or ► on the remote to move and position the image.  
						

							32
EZCast Pro
System Requirements
The EZCast Pro software is available for the Mac, iOS, Android and Windows operating 
systems. The following is a list of the requirements:
• Mac, iOS 7 and above
or
• Android 4.0
or
• Windows 7, 8, 8.1
Setup EZCast Pro
Download and install the EZCast Pro
• Smart device: APP Store or Google Play
• PC: https://www.iezvu.com/os_download.php?l=en
Note: 
1. Visit “https://www.iezvu.com/os_download.php?l=en” for more detail or latest EZCast 
APP download 
2.Your PC must be connect to the same network as your Qumi device.
The EZCast Pro software offers two interactive methods, Pro and Off Line. The EZCast Pro 
version requires a connection to the Qumi to manage and configure the various functions. 
As for the EZCast Off Line version, provides access to Photo, Camera, Document, Web, 
CloudS, Comment, Update and Preference functions. A connection to the Qumi is not 
required to use the EZCast Off Line version.
Setting up a network connection from the Qumi to a device is simple and easy. There are 
two methods for a network setup, AP and Router Setup.  
						

							33
AP Setup Mode
By setting up the Qumi as your network Access Point (AP), you can access Qumi menus 
through the EZCast Pro software. Additionally, your device is able to access the internet if 
the Qumi has an established WiFi connection.
1. From the main menu, use the ◄ or ► on the remote to select EZCast Pro. Press  
to continue.
To access the EZCast Pro software on your smart device, you need to first download 
the APP to your smart device.
2. You can scan the QR code found on the screen or download from the App Store or 
Google Play. Search for EZCast Pro.
3. Turn on the WiFi function on your device.
4. In the network settings, select the SSID (EZCast Pro_XXXXXXXX) as displayed in 
the menu screen.
5. When prompted for a password, enter the listed password as displayed on the 
screen (XXXXXXXX in menu screen).  
						

							34
6. The network connection between the Qumi and smart device is established. The 
network status is updated, see the following image.
7. On the device, tap the EZCast Pro application to open.
Note: 
The device must be networked to the Qumi prior to opening the EZCast Pro\
 application.
8. Tap EZCast Pro to display the EZCast Pro menu. If the no other menu displays, your 
smart device does not detect the Qumi on the network.