Vivitek Qumi Q6 User Manual

							35
9. In EZCast Pro menu, tap Setting.
10. In the Setting menu, use your smart device or the remote to select Internet. 
11. Tap  or press on the remote to continue.  
						

							36
12. Press the ▲ or ▼ on the remote or smart device to select a listed SSID and press 
.
 
13. Once the SSID is selected, a password prompt displays. Enter the correlating 
password if required. Tap or click OK to enter. Tap or click Cancel to stop the 
process. Click Forget to remove the selected WiFi profile.
Note: 
After setting up the wireless connection, you may need to reconnect Qumi\
 and your 
device.
Router Setup Mode
In this configuration, both the Qumi and device are connected to a local router. In this way, 
the EZCast Pro software is able to remotely access the Qumi through the network setting.
1. From the main menu, use the ◄ or ► on the remote to select EZCast Pro. Press  
to continue.
To access the EZCast Pro software on your smart device, you need to first download 
the APP to your smart device.
2. You can scan the QR code found on the screen or download from the App Store or 
Google Play. Search for EZCast Pro.  
						

							37
3. Turn on the WiFi function on your device.
4. In the network settings, select the SSID for your WiFi setup.
5. When prompted, enter the password to the selected SSID.
6. Both the Qumi and your smart device are now connected to the same network 
router, see the following image.
7. On the device, tap the EZCast Pro application to open.
Note: 
The device must be networked to the Qumi prior to opening the EZCast Pro\
 application.
8. Tap EZCast Pro to display the EZCast Pro menu. If the no other menu displays, your 
smart device does not detect the Qumi on the network.
9. In EZCast Pro menu, tap Setting.
10. In the Setting menu, use your smart device or the remote to select Internet.
11. Tap  or press on the remote to continue.
12. Press the ▲ or ▼ on the remote to select a listed SSID and press .
13. Once the SSID is selected, a password prompt displays. Enter the correlating 
password if required. Tap or click OK to enter. Tap or click Cancel to stop the 
process. Click Forget to remove the selected WiFi profile.
Note: 
1. Both Qumi and the device must be setup to use the same network subnet. \
Failure to 
setup the network correctly prevents access to the Qumi. 
2. After setting up the wireless connection, the connection between your sm\
art device and 
the Qumi may be dropped. Connect to the Qumi again to continue using the\
 EZCast Pro 
app.
OTA Upgrade FW (Media Firmware Upgrade Over The Air) 
Connect to Internet and use OTA function to check latest FW then upgrade. 
In Setting menu, you can update the latest FW over the air.
1. EZCast Pro connected from App.
2. Choose Setting.
3. Select More
4. Select Upgrade  
						

							38
EZCast Pro Overview
The EZCast Pro application provides remote function control for the Qumi\
. EZCast Pro 
and EZCast Off Line versions are available.
Note: 
The screen shot is only for reference. 
Listed function names are for reference only and may differ from actual sample use.
                     
                                      iOS                               \
                          Android
IconFunctionDescription
Photo
Select to display available image files (camera roll or 
connected device). 
Use  to edit a selected photo then save the images with 
the modifications.
CameraSelect to display the device’s camera image.
Video
Select to display video files from the camera roll or a 
connected device.
Once selected, you are prompted to enter a name for the 
file before saving on the Qumi’s internal memory.
Not available in EZCast Off Line.
Note: 
Video format: MPEG1/2/4/H. 
Subtitle format: srt, smi, ssa and cdg formats with UTF-8 
coding.  
						

							39
IconFunctionDescription
Document
Select to display specific documents. Easy commenting is 
available. Modified documents are stored in the camera roll 
as images.
Support Microsoft® Office, PDF and Apple’s iWorks. Sync 
the documents files to your device before using.
WebSelect to display the built-in browser application. 
CloudS
Cloud Storage
Select to open a cloud provider in order to select and 
download an available file.
Note:  
Cloud provider application must be installed and appropriate 
account information must be available to allow CloudS 
access to the application. 
CloudV
Cloud Video
Select to open a cloud provider in order to select and 
download an available file.
Note:  
Cloud provider application must be installed and appropriate 
account information must be available to allow CloudV 
access to the application. 
Split Screen
Select to view the split screen option. Split Screen allows 
you to select a single, double or quadruple screen view. 
Multiple users can select the screen location to be displayed 
through the Qumi.
Not available in EZCast Off Line.
Note:  
Limit on the use of streaming features, including video 
streaming, music streaming, online video streaming, etc.
Preference
Modify preference setting for the EZCast application: Select 
Preferred Device, Host Control preferences, and displays 
versioning information.
Setting
Settings menu provides configuration access for the 
following: output resolution, SSID and password change, 
router connection setup, boot up mode priority and firmware 
updating.
Shared music is synchronized to your device. Not available 
in EZCast Off Line.  
						

							40
IconFunctionDescription
EZMirror
Tap to switch to EZMirror mode. Once enabled, this mode 
displays the contents of your smart device directly onto the 
projected screen. 
Once you turn it on, there is a 60 second countdown to 
allow your mobile phone to connect with the Qumi. Select 
your Miracast function in your device setting page.
Note: 
EZMirror is only available for Android devices.
Mirror
Click to switch to Mirror mode. Once enabled, this mode 
displays the contents of your desktop directly onto the 
projected screen. 
Once you turn it on, click to switch between On or Extended.
Note: 
Mirror is only available for Windows devices.
Quality
Click to switch between High Quality or Low Quality. The 
setting is only available when the Mirror function is enabled.
Note: 
Quality is only available for Windows devices.
Audio
Click to enable or disable audio function while using the 
projection function when the Mirror function is enabled.
Note: 
Audio is only available for Windows devices.
CompatibleNote: 
Compatible is only available for Windows devices.  
						

							41
DLNA DMR
Digital home entertainment is now easy to stream around the house without hassles 
through the EZCast Pro function on your projector.
DLNA is a standard that enables devices to share photos, video, and music with each 
other and your DLNA compliant projector. Through any DLNA streaming App you can 
easily push multimedia content to the EZCast Pro interface anywhere within your home 
network. 
By selecting a DLNA streaming app you can create a bridge between your various devices 
--Windows or iOS laptop and PC, smartphone, and tablet--and your projector. With DLNA, 
all you need is a wired or wireless network to stream your media over your home network. 
DLNA DMR for Windows OS
Before you get started, make sure your projector is powered on and connected to the 
same local network as your PC. The projector must be set to EZCast Pro mode on the 
user interface. 
For this procedure, Windows 7 operating system is used. The screens and steps may 
differ when using a different Microsoft Windows versions.
Your PC must be on a home or work network to join or create a HomeGroup. PC’s in a 
domain are not able to create HomeGroups.
Note:
• To join a homegroup, your PC’s network location must be set to home. 
• If you are using third-party firewall or security software, you may have to configure it 
to allow the DLNA server access to your network.
1. On your PC, navigate to Start -> Control Panel. 
2. In the Control Panel window, click Network and Internet.
3. In the Network and Internet window, click Network and Sharing Center.
4. In the Advanced sharing settings window, in the Media streaming section, click 
Choose media streaming options.  
						

							42
5. The Change homegroup settings window displays. Under Share menu with devices 
drop-down menu, click Stream my pictures, music, and videos to all devices on my home 
network to enable the option. 
6. Once enabled, select Choose media streaming options...
7. The Choose media streaming options for computer and devices window displays. Find the  
Show devices on: option and click the drop-down menu to select Local Network. A list of 
available devices displays.
8. Select the DLNA compatible projector from the devices list and select Allowed from the 
drop-down menu. 
9. Click OK to continue.  
						

							43
Chapter 4  On-Screen Display (OSD) Settings
OSD Menu Controls
The Qumi has an On-Screen Display (OSD) settings menu that allows you to make 
adjustments and changes to settings, such as display settings and audio settings. There 
are 3 menus within the OSD menu:
• Image – Various aspects of the image quality can be adjusted in this menu.
• Setting 1 – Default language and other settings can be adjusted in this menu.
• Setting 2 – Auto source and other settings can be adjusted in this menu.
If the interface is set on HDMI/MHL or HDMI, the OSD menu can be accessed by pressing 
the MENU button on the remote control or keypad.
If the interface is set on the Qumi Media Suite menu, the OSD menu can be accessed by 
pressing the MENU button on the remote control or pressing MENU on the keypad.
Note: 
If the OSD menu is inactive for 15 seconds, the OSD menu will close.
Navigating the OSD
The remote control cursor buttons or the buttons on the top of the Qumi can be used to 
navigate and make changes to the OSD settings.
1. Enter the OSD menu.
2. Press the ◄ or 
► button to move 
through the 3 menus.
3. Press the ▲ or ▼ 
button to move the 
cursor up and down 
within in a menu and 
press .
4. Press ◄ or ► to 
change the values for 
specific settings.
5. Press MENU button 
or EXIT on the 
remote control to 
close the OSD or 
close a submenu.  
						

							44
Setting the OSD Language
The language that is displayed in the OSD can be changed. To change the language in 
the OSD, perform the following steps: 
1. Enter the OSD menu. Press the ◄ or ► button to select the Setting 1 and press .
2. Press the ▲ or ▼ button to move to the Advanced 1 menu.
3. Press  to enter the Advanced 1 sub menu.
4. Press the ▲ or ▼ button until the cursor highlights the Language setting and  
press .
5. Press the ◄ or ► button until the language you want is shown in the cursor.
6. Press the EXIT button or MENU button four to close the OSD.