Vivitek Qumi Q6 User Manual

							5
Key DefineOSD OffOSD On
PreviousN/AN/A
Volume UpOpens Volume menu
If Volume menu is displayed: 
Volume level is raised.
If other menu is displayed: closes 
menu and opens Volume menu
Volume DownOpens Volume menu
If Volume menu is displayed: 
Volume level is lowered.
If other menu is displayed: closes 
menu and opens Volume menu.
Mute
If audio is not muted: mutes 
audio and opens Mute menu
If Mute menu is displayed, unmutes 
audio and displays UnMute menu.
If audio is muted: unmutes 
audio and opens UnMute 
menu
If UnMute menu is displayed, mutes 
audio and displays Mute menu.
If other menu is displayed, closes 
menu. If audio is not muted, mutes 
audio and opens Mute menu.
If other menu is displayed, closes 
menu. If audio is muted, unmutes 
audio and opens UnMute menu.
ModeOpens Display Mode menu
If Display Mode menu is displayed: 
no event triggered
If other menu is displayed: closes 
menu and opens Display Mode 
menu
SourceOpens Source menu
If Source menu is displayed: no 
event triggered
If other menu is displayed: closes 
menu and opens Source menu
Blank
If source is displayed and 
audio is on: mutes audio and 
opens Blank menu
If Blank menu is on : unblanks 
image, recovers audio (dependent 
on Mute function status)
If source is displayed and 
auio is off : opens Blank 
menu
If other menu displays: closes 
menu, blank Image displays, mutes 
audio and opens Blank menu
If source is not selected: 
unblanks image, recovers 
audio (dependent on Mute 
function status)  
						

							6
Remote Control For MHL
Key DefineOSD OffOSD On
Power On/Off
When system is in standby: 
powers on projector
If Power Off menu is displayed: 
powers off projector
When system is active: 
opens Power Off menu
If other menu is displayed: exits 
menu and opens Power Off menu
UpMoves menu selection upMoves OSD menu highlight
Media HomeReturns to Media Home 
PageReturns to Media Home page
LeftMoves menu selection leftPerforms action indicated by menu
Enter / Play / 
Pause
Enters media sub menu, 
Plays / Pauses media 
selection
Performs action indicated by menu
RightMoves menu selection rightPerforms action indicated by menu
MenuOpens OSD menuCloses OSD
DownMoves down in entry listMoves OSD menu highlight
ExitExits current menuCloses OSD
RewindRewinds media playRewinds media play  
						

							7
Key DefineOSD OffOSD On
StopStops media playStops media play
PreviousSkips to previous entry in listSkips to previous entry in list
Volume UpOpens Volume menu
If Volume menu is displayed: 
Volume level is raised.
If other menu is displayed: closes 
menu and opens Volume menu
Volume DownOpens Volume menu
If Volume menu is displayed: 
Volume level is lowered.
If other menu is displayed: closes 
menu and opens Volume menu.
Mute
If audio is not muted: mutes 
audio and opens Mute menu
If Mute menu is displayed, unmutes 
audio and displays UnMute menu.
If audio is muted: unmutes 
audio and opens UnMute 
menu
If UnMute menu is displayed, mutes 
audio and displays Mute menu.
If other menu is displayed, closes 
menu. If audio is not muted, mutes 
audio and opens Mute menu.
If other menu is displayed, closes 
menu. If audio is muted, unmutes 
audio and opens UnMute menu.
ModeOpens Display Mode menu
If Display Mode menu is displayed: 
no event triggered
If other menu is displayed: closes 
menu and opens Display Mode 
menu
SourceOpens Source menu
If Source menu is displayed: no 
event triggered
If other menu is displayed: closes 
menu and opens Source menu
Blank
If source is displayed and 
audio is on: mutes audio and 
opens Blank menu
If Blank menu is on : unblanks 
image, recovers audio (dependent 
on Mute function status)
If source is displayed and 
auio is off : opens Blank 
menu
If other menu displays: closes menu, 
blank Image displays, mutes audio 
and opens Blank menu
If source is not selected: 
unblanks image, recovers 
audio (dependent on Mute 
function status)  
						

							8
Remote Control For Media
Key DefineOSD OffOSD On
Power On/Off
When system is in standby: 
powers on projector
If Power Off menu is displayed: 
powers off projector
When system is active: 
opens Power Off menu
If other menu is displayed: exits 
menu and opens Power Off menu
UpMoves menu selection upMoves OSD menu highlight
Media HomeReturns to Media Home 
PageReturns to Media Home page
LeftMoves menu selection leftPerforms action indicated by menu
Enter / Play / 
Pause
Enters media sub menu, 
Plays / Pauses media 
selection
Performs action indicated by menu
RightMoves menu selection rightPerforms action indicated by menu
MenuOpens OSD menuCloses OSD
DownMoves down in entry listMoves OSD menu highlight
ExitExits current menuCloses OSD
RewindRewinds media playRewinds media play  
						

							9
Key DefineOSD OffOSD On
StopStops media playStops media play
PreviousSkips to previous entry in listSkips to previous entry in list
Volume UpOpens Volume menu
If Volume menu is displayed: 
Volume level is raised.
If other menu is displayed: closes 
menu and opens Volume menu
Volume DownOpens Volume menu
If Volume menu is displayed: 
Volume level is lowered.
If other menu is displayed: closes 
menu and opens Volume menu.
Mute
If audio is not muted: mutes 
audio and opens Mute menu
If Mute menu is displayed, unmutes 
audio and displays UnMute menu.
If audio is muted: unmutes 
audio and opens UnMute 
menu
If UnMute menu is displayed, mutes 
audio and displays Mute menu.
 
If other menu is displayed, closes 
menu. If audio is not muted, mutes 
audio and opens Mute menu.
If other menu is displayed, closes 
menu. If audio is muted, unmutes 
audio and opens UnMute menu.
ModeOpens Display Mode menu
If Display Mode menu is displayed: 
no event triggered
If other menu is displayed: closes 
menu and opens Display Mode 
menu
SourceOpens Source menu
If Source menu is displayed: no 
event triggered
If other menu is displayed: closes 
menu and opens Source menu
Blank
If source is displayed and 
audio is on: mutes audio and 
opens Blank menu
If Blank menu is on : unblanks 
image, recovers audio (dependent 
on Mute function status)
If source is displayed and 
auio is off : opens Blank 
menu
If other menu displays: closes menu, 
blank Image displays, mutes audio 
and opens Blank menu
If source is not selected: 
unblanks image, recovers 
audio (dependent on Mute 
function status)  
						

							10
Important: 
1. Be sure nothing obstructs the path between the remote control and the Q\
umi. If the path 
between the remote control and the Qumi is obstructed, the signal can bo\
unce off certain 
reflective surfaces. 
2. The buttons and keys on the Qumi have the same layout and similar funct\
ions as the 
corresponding buttons on the remote control. This user’s manual describes the functions 
based on the remote control.
Qumi and Remote Control Buttons
The Qumi can be operated using the remote control or the keypad on the top of the 
Qumi. All operations can be carried out with the remote control; however, the keypad 
on the Qumi carries out the same operations as the remote control by pressing a 
combination of keys.
The remote control is not only used to navigate the cursor in the menus, but can also be 
used to control the media functions (music and video playback). For more details about 
how to control the media functions with the remote control, please refer\
 to 19.
Note: 
When the projector is under MHL mode, The keypad on projector should be with the same 
definition of the key on remote control.
When MHL function: 
For App settings, ▲ Up, ▼ Down, ◄ Left and ► Right are used as directional arrows, 
also included ENTER and EXIT.
Controlling your smart device with the remote control: 
When the projector projects the contents from your MHL compatible smart device, you can 
use the remote control to control your smart device. 
To enter the MHL mode, the following buttons are available for controlling your smart 
device, Arrow keys (▲ Up, ▼ Down, ◄ Left, ► Right), EXIT control buttons..
Media Player Screen
The media player screen is the main interface for the Qumi Q6 Series. If a USB drive is 
plugged in when powering on the Qumi, the media player screen appears. In the media 
player screen, you can choose the type of media to display by selecting:
• EZ Media – Allows the use of media stored in the internal memory or a connected 
USB drive to display photos, music, audio and documents.
• EZCast Pro – Allows the streaming of media from smart devices or mirroring of 
connected Android/iOS/Mac/Windows  devices.
• Connect to PC – Allows the use of a connected PC as a storage device.  
						

							11
Chapter 2  Getting Started
What You Need
Many types of external devices and peripherals can be connected to the Qumi. External or 
portable music players can be connected to play music. DVD, VCD and VHS players can 
be connected to play movies. Camcorders and digital cameras can also be used to play 
videos and display photos. Computers can be connected, as well as peripherals such as 
USB drives to display documents and other types of media.
These devices can be connected to the Qumi by using an appropriate cable. Make sure 
that the connecting device has an appropriate output connector.
Warning: 
As a safety precaution, disconnect all power to the Qumi and connecting \
devices before 
making connections.
Connect AC power adapter
Connect audio
Insert USB device Connect HDMI/MHL peripherals
Connect HDMI peripherals  
						

							12
Setting Up Qumi
Connecting Peripherals by HDMI
Connect HDMI-compatible peripherals to the Qumi by using an HDMI cable (Optional).
Game
Console Personal
Computer
Smartphone
Camera
Blue Ray 
DVD player
Connecting to an MHL Device
Connect your Qumi to a MHL-compatible device by using an HDMI/MHL cable.(Optional)
Tablet
Smartphone
Note: 
For some MHL compatible devices, whose output is not thru micro-USB, an extra cable \
adaptor may be required. 
Adapters for Samsung devices are sold separately.  
						

							13
Inserting a USB Drive
Connect a USB drive to the Qumi by inserting the storage device(s) into the appropriate 
port.
Connecting Audio
Connect earphones or mini speakers to the Qumi by inserting into the Audio Out port.
HeadphoneMini Speaker  
						

							14
Starting and Shutting down the Qumi
1.Connect the AC power adapter 
to the Qumi. Connect the other 
end of the AC power adapter to 
a wall outlet.
Note: 
Adapter models may vary 
between regions.
2.Press the  POWER button to 
turn on the Qumi.
The Qumi splash screen 
displays and connected devices 
are detected.
See Setting an Access 
Password (Security Lock) on 
page 16 if security lock is 
enabled.