Vivitek Projector DU8090Z User Manual

DU8090Z DLP Projector - User Manual 
 
30 
 
OSD MENU – PICTURE 
Picture Mode 
Use ◄or► to select desired picture mode 
High Bright: The highest brightness output mode is suitable for the application where the highest brightness output 
is needed. 
Presentation: The best projection effect is suitable for the presentation or picture. 
Video: The mode is suitable for playing video content. 
 
Brightness 
Press ENTER, and use ◄ or ► to increase or decrease the level of brightness. 
Contrast 
Press ENTER,...

DU8090Z DLP Projector - User Manual 
 
31  Offset: These three options will shift the color spectrum for the whole image and change its brightness, if minimal amount 
of red, green or blue appears in the gray areas, you can adjust the offset of the corresponding color accordingly. By 
increasing the offset, the image brightness will become lower. 
Gain: These three options are used to increase or decrease the range of color input for the entire image. If minimal 
amount of red, green or blue appears in...

DU8090Z DLP Projector - User Manual 
 
32  Lens Type 
There are eight projections lens can be used in DU8090Z, the initial projection position of Ultra Short Throw (UST) Lens is 
different to other seven projection lenses. The projector preset two initial projection positions for these two types 
accordingly, Center Lens function can moves the lens to the initial position (center) automatically per the setting. Please 
set this option to UST Lens if Ultra Short Throw Lens is installed in the projector,...

DU8090Z DLP Projector - User Manual 
 
33  Blanking: This function can adjust the edges of the image and hide surplus sections of the projection. 
Top: Press▲▼ to adjust the top blanking area on the projected picture. 
Bottom:Press▲▼ to adjust the bottom blanking area on the projected picture. 
Left: Press ◄► to adjust the left blanking area on the projected picture. 
Right: Press ◄► to adjust the right blanking area on the projected picture. 
Reset 
All the settings toward blanking will set to default....

DU8090Z DLP Projector - User Manual 
 
34 
 
OSD MENU – CONTROL 
 
Language 
Select desisted OSD language, the available languages options are English, Española, Deutsch, Portuguese, 简体中文, 
繁體中文, 日本語, 한국어. 
 
Projection Mode 
Use The projection mode option can be used to change the direction of the projected image. 
Front: Install the projector on the table and project the image on the screen forward. 
Ceiling + Front: Mount the projector on the ceiling and project the image on the screen forward, the...

DU8090Z DLP Projector - User Manual 
 
35  prefer to set it by manual, you can select On or Off. 
Off: Turn off High Altitude mode if the projector is installed in an area under 5000 feet. 
On: Turn on High Altitude mode if the projector is installed in an area over 5000 feet. 
Auto: Set up this mode automatically by estimated altitude. 
 
Auto Power Off 
This function is set to OFF by default. When it is set to ON and no input signal is received within 20 minutes, the projector 
will turn off...

DU8090Z DLP Projector - User Manual 
 
36   
Background 
User can use this function to specify the image displayed on the blank screen when there is no input signal. The 
selectable items are Logo, Black and Blue, the default setting is Logo.
 
 
Startup Logo 
Press ENTER button, and use the ◄► function to turn on / off the Startup Logo.  
 
Remote Sensor 
The default is On. However, there are three conditions that will be suggested to turn off “Remote Sensor”; the possible 
condition is that if the user...

DU8090Z DLP Projector - User Manual 
 
37 
 
OSD MENU – SERVICE 
 
Model 
Display the project model name. 
 
Serial Number 
Display the serial number of the projector. 
 
Software Version 1 / Software Version 2 
Display the software version in the projector. 
 
Active Source 
Display the current input source information. 
 
Signal Format 
Display current input source format   
. 
H/V Refresh Rate 
Display horizontal and vertical refresh rate of the current picture. 
 
Pixel Clock 
Display pixel clock of...

DU8090Z DLP Projector - User Manual 
38 
Product Specification 
Display Type Single Chip 0.67 DLP Technology 
Brightness 8,000 
ANSI Lumens
Native Resolution WUXGA (1920 x 1200) 
Maximum Resolution  WUXGA (1920 x 1200)@60Hz (Reduced Blanking) 
Contrast Ratio  10,000:1 
Illumination Type Laser Phosphor 
Throw Ratio*  1.73 - 2.27:1 
Image Size (Diagonal) *  40 - 500 
Projection Distance *  1.45 - 24.85m (4.77ft to 81.52ft) 
Projection Lens *  F = 1.7 - 1.9, f = 26 - 34mm 
Zoom Ratio * 1.3x
Aspect Ratio...

DU8090Z DLP Projector - User Manual 
 
39   
Supported Signal Input Timing 
Signal Format Resolution Frame Rate 
(HZ) 
VGA, BNC HDMI / HDBaseT HD/SDI/3G 
SOG RGBHV RGBYUV 
8-bit10-bit 12-bit
PC 640x480 59.94   O O     
640x480 74.99    O  O      
640x480 85    O  O      
800x600 60.32    O  O      
800x600 75    O  O      
800x600 85.06    O  O      
848x480 47.95    O  O      
848x480 59.94    O  O      
1024*768 60    O  O        
1024*768 75    O  O        
1024*768 85    O  O        
1280x720 47.95...